Epoxies

Adhesives for Your Specific Needs
Epoxies

Adhesives for Your Specific Needs

EP45HTAN: Thermally Conductive, Electrically Insulative Epoxy Well suited for metal bonding especially roughened titanium, EP45HTAN is a two part epoxy paste with superior strength retention at elevated temperatures. It bonds well to a wide variety of similar/dissimilar substrates, such as multiple metals, glass, composites and many plastics. This system combines cryogenic serviceability with...

Read More »
Master Bond EP3HTSDA-1 for Die Attach Applications
Epoxies

Master Bond EP3HTSDA-1 for Die Attach Applications

Premier die attach epoxy EP3HTSDA-1 features a very impressive thermal conductivity of 40-45 BTU•in/(ft²•hr•°F), substantially higher than other silver conductive epoxies. This video demonstrates how Master Bond EP3HTSDA-1 is dispensed and applied to a defined area without any tailing. Watch Video on EP3HTSDA-1: http://click.skem1.com/click/koc3k-cbupji-13mg5467/ Updated Electronic...

Read More »
Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity
Epoxies

Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity

Master Bond EP3HTSDA-1 is a single part, no mix epoxy adhesive designed primarily for die attach applications. It exhibits a die shear strength of 20-22 kg-f and has a high thermal conductivity of over 40-45 BTU•in/ft2•hr•°F [5.7-6.5 W/(m•K)]. “This 100% solids formulation has an ideal viscosity and flow for die attach, will not ‘tail’ and can be easily dispensed automatically”...

Read More »
Applications in Research Labs and Commercial Use for EP29LPSP
Epoxies

Applications in Research Labs and Commercial Use for EP29LPSP

Ideal for demanding cryogenic environments, two-part EP29LPSP can withstand temperatures as low as 4K and can resist cryogenic shock when, for instance, it is cooled from room temperature to cryogenic temperatures within a 5-10 minute window. In over a dozen published research articles, patents, and manufacturers’ specifications, scientists and engineers have identified EP29LPSP for use in...

Read More »
Master Bond EP110F8-5 Epoxy offers pot life of 2-3 days.
Epoxies

Master Bond EP110F8-5 Epoxy offers pot life of 2-3 days.

Master Bond EP110F8-5 Epoxy offers Shore D hardness of 70-80 and elongation of 40-60%. Unit is operated in a temperature range of -100°F to +300°F and is available in ½ pint, pint, quart, one and 5 gallon containers. Product provides volume resistivity more than 1015 ohm-cm, dielectric constant of 2.91 and a dissipation factor of 0.009 at 1 KHz. Master Bond EP110F8-5 can stick on metals,...

Read More »
Toughened, Two Component Epoxy Features Enhanced Dimensional Stability and a Long Working Life
Epoxies

Toughened, Two Component Epoxy Features Enhanced Dimensional Stability and a Long Working Life

Developed for potting, sealing, encapsulation and casting applications, Master Bond EP110F8-5 is dimensionally stable and has low shrinkage upon cure. This system features superior electrical insulation properties including a volume resistivity exceeding 1015 ohm-cm, a dielectric constant of 2.91 at 1 KHz and a dissipation factor of 0.009 at 1KHz. “EP110F8-5 is an easy to use, heat curing epoxy...

Read More »
Finding Strongest Adhesives for Nylon Bonding
Epoxies

Finding Strongest Adhesives for Nylon Bonding

Lap Shear Strength of Adhesives for Nylon to Nylon Bonding Master Bond tested the tensile lap shear strength of several epoxy products to determine their capability in nylon to nylon bonding applications. The testing produced impressive results with many systems delivering high values. While high strength is often crucial, each system also offers a diverse range of other properties that must be...

Read More »
One Component, High Temperature Resistant Epoxy Offers a Low Coefficient of Thermal Expansion
Paste

One Component, High Temperature Resistant Epoxy Offers a Low Coefficient of Thermal Expansion

Featuring a low coefficient of thermal expansion (CTE) of 15-20 x 10^-6 in/in/°C, Master Bond EP13LTE is a one part epoxy for structural bonding applications. “EP13LTE is very convenient to use, since it doesn’t require mixing, and has an unlimited working life at room temperature,” said Venkat Nandivada, manager of technical support. “Besides being easy to handle, this system also...

Read More »
Epoxy System EP62-1 Featuring Superior Chemical Resistance to Harsh Chemicals
Epoxies

Epoxy System EP62-1 Featuring Superior Chemical Resistance to Harsh Chemicals

Master Bond EP62-1 is primarily used as an adhesive, sealant or coating. It has the ability to withstand harsh environmental conditions including exposure to acids, bases and solvents. This two part epoxy features thermal stability with a glass transition temperature exceeding 160-165°C. Read More: http://click.skem1.com/click/ja603-bth3q4-13mg5465/ Dimensionally stable, this two part epoxy has...

Read More »
Master Bond EP39MAOHT for Large Potting & Encapsulation Applications
Epoxies

Master Bond EP39MAOHT for Large Potting & Encapsulation Applications

EP39MAOHT blends a low viscosity and low exotherm, making it particularly well suited for large volume potting and castings. This video demonstrates this system’s mixing and flow properties. This room temperature curing system has excellent thermal conductivity and electrical insulation properties. It offers chemical resistance to water, fuels and hydraulic fluids as well as many acids and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers