New Architectural & Civil Engineering Products Products

Linear LED Luminaire features waterproof, vapor-tight design.

Combining slender fiberglass reinforced polyester housing with polycarbonate lens, VIKING LED Luminaire is available in standard or high output models with 4,000 or 5,000 delivered lumens, respectively, and efficacy approaching 110 lm/W. LEDs come in 3,000, 4,000, or 5,000 K color temperatures with CRI >80. Measuring 4 ft 3 in. x 3.5 in. x 4 in., IP65-rated luminaire has seamless single piece...

SMT LED Floodlight Projector illuminates large-scale structures.

Combining 2 projectors on one mounting frame, multimodal POWERSHINE D producesÃ- lighting and effects for architectural projects. Each projector is independently tiltable toÃ- maximizeÃ- coverage or strengthen illumination. There are 96 LEDs per head in RGBW, dynamic, warm, or cool white, and total output is 19,288 lm (RGBW)Ã- when using 8Ã-

Linear LED Lighting illuminates building exteriors.

Architura-S LED, which can replace T5 andÃ- T5 HO for lighting of exterior or interior commercial, industrial, and municipal spaces,Ã- evenly distributes white light that is focused forward and upwardÃ- for indirect illumination. Listed for wet locations, ETL- and CSA-rated products are intended for 10 in. to 24 ft wire-thru single LED runs. Hub connections enable tool-less connection...

Recessed Adjustable LED Downlights target new construction.

Available in 15 W or 20 W for insulated and non-insulated ceilings, Models RLH-P351-15 and RLH-P401 feature 3 Ã-½ in. and 4 in. diameter trim, respectively, while Models RLHP355-15 and RLH-P405 feature 3 Ã-½ in. and 4 in. square trim, respectively. LEDs may be specified in 2700K, 3000K, 3500K, or 4000K CCT with CRI of 90. Estimated output is 860 lm from 15 W and 1,250 lm from 20 W....

Hot Forging Process

Check out this white paper to learn about the benefits of hot forging.

LED Post Top Luminaire illuminates outdoor areas.

Proportioned for illumination of streetscapes and other outdoor pedestrian gathering areas, solid-state VARESE offers symmetric- and asymmetric distributions with Type II/III/V optics. LED light engines deliver uniformity with spacings up to- 5 mounting heights possible. CCTs are 3000K or 4000K with- CRI >80, and power consumption is 25 or 37 W. Other features include clear acrylic cylindrical...

Linear LED Luminaire features slender design.

Offering choice of light distributions and mounting options, BALDUR SOLO has narrow cross section of 2 Ã-½ in. wide x 3 3/16 in. high and comes in lengths of 44, 66, or 89 in. Lighting modules are available with up to 12,000 delivered lumens and efficacies up to 125 lm/W. Providing warm and neutral color temperatures of 3,000, 3,500, or 4,000 K, luminaire is suited for retail, commercial, and...

LED Spotlight features true 4 degree beam.

Providing over 74,000 CBCP from just 15 W, LP1 SuperSPOT Series features tool-less field replaceable LED assembly, as well as discreetly hidden driver, compatible with trailing edge electronic low-voltage dimmers, dimmable to 5%. Optional addressing and control is available using LumenTalk™ for DMX, Triac, ELV, or 0–10 V systems and dimmable to 1%.

Multi-Colored LED Signal Stack Light has 110 dBA audible horn.

Used for routing traffic and processing status indications, Class 1 Division 2 rated HAL-TL-5X10W-C-PA is approved for use in hazardous environments and features five 10 W LED lamps that produce amber, red, blue, green, and white light output. Each LED lamp offers 1,050 lm output, and lights can be configured to operate onÃ- steady burn,Ã- strobe, orÃ- combination thereof. Audible...

LED Street/Area Lighting is fully solar powered.

Suitable for dark-sky, full cut-off LED area, roadway, street, and walkway lighting, SolarUrban LED comes with solar power assembly, light fixture, bracket, and pole- or wall-mounting hardware. Solar power assemblies range from 30–550 W; white light, 15–60 W outputÃ- LED lamps provide Type II, III, IV, and V dimmable distribution patterns;Ã- and storage battery provides...

Bright White Fog Light Bulbs match HID/LED performance.

As upgrades for 12276 and 12086FF bulbs, HiPerVision CrystalVision ultra provides bright, white light that lets drivers color match 4000K performance of their fog lights to their HID and LED headlights. Bulbs offer appearance of incandescent light while utilizing lighting technology derived from cathode ray tube manufacturing. Reliability stems from coil positioning accuracy.

What Can Test Devices Spin for You?

Test Devices helps you ensure the safety and efficiency of your high performance machines with cutting edge spin testing, rotor engineering, and precision balancing capabilities. Check out the video to learn more.