Hot Melt Adhesive offers deflection resistance.

Hot Melt Adhesive offers deflection resistance.

PUR-FECT LOK(R) 34-957A polyurethane reactive (PUR), 100% solids, hot melt adhesive has 0/0 rating for flame propagation and smoke generation. Product runs cleanly at temperatures from 250 to 275 degrees F, and provides bond strength in hours. Suitable for vinyl and substrates such as wood, foamed plastics, metals, and high-pressure laminates, recommended application rate is 6 to 10 grams per...

Read More »
Adhesive suits applications requiring wet tack.

Adhesive suits applications requiring wet tack.

VY-LOK(R) 40-012A synthetic polymer emulsion adhesive is suitable for wet or semi-wet combining or thermoplastic mounting of vinyl film to porous board stocks. Composed of 66% solids with no filler, product is white in color but dries clear. It may be used as is or with water-reducible isocyanate catalyst for improved heat resistance to meet creep resistance requirements.

Read More »
Sealant protects chrome plated tools.

Sealant protects chrome plated tools.

Dri-Touch(R) topcoat penetrates and protects recessed areas of parts that can rust prematurely due to thin plating deposits. It can also be applied to hand tools, fixtures, castings, forgings, powdered metal, dies, and partially finished components in service or storage. Coating will not drain or wick off into packaging, thus maintaining effective, long-term barrier against humidity and...

Read More »
Thixotropic Epoxy cures in 5 minutes.

Thixotropic Epoxy cures in 5 minutes.

Tra-Bond 2106T snap cure epoxy is recommended for use in lower temperature or wet industrial bonding applications that require fast cure. It offers low shrinkage, and excellent mechanical and electrical properties. Epoxy provides resistance to water, galvanic action, petroleum fuels, and many chemicals. It develops tough bonds to metals, plastics, glass, hardboards, ceramics, rubber, and masonry.

Read More »

Adhesive is suitable for medical applications.

Loctite(R) 3345 ultra-violet (UV) cure medical grade adhesive bonds metal to glass. Offering sterilization resistance, product is suitable for applications such as needle assemblies, syringes, oxygenators, filters, and reusable medical devices where limited repeat steam sterilization is required. Loctite 3345 single-component, acrylic adhesive complies with ISO-10993 biocompatibility...

Read More »
Adhesive Film offers quick stick and strong holding power.

Adhesive Film offers quick stick and strong holding power.

Dublfilm(R) S972A thin polyester film is double coated with silicone pressure sensitive adhesive. Offering chemical resistance, film provides excellent adhesion to silicone coated substrates and high initial tack. It is highly conformable and includes specially treated polyester release film, making it easy to unwind. Film is suitable for silicone foam and gasket bonding, high or low temperature...

Read More »
Sealant is suited for use with stainless steel.

Sealant is suited for use with stainless steel.

TPS TeflonÂ-® Pipe Sealant provides instant seal on pipe joints. When fully cured, sealant locks joints against vibration, forming seal against leaks to extreme pressures. Product also performs on non-taper threaded fittings. TeflonÂ-® particles provide one-way lubricating action during assembly to prevent galling. Seal is impervious to most chemicals, solvents, gasses, and industrial...

Read More »
Grout protects cables.

Grout protects cables.

Cement-based nonshrink Five Star Special Grout 400 for cables and tendons provides corrosion protection. It meets Guide Specification for Grouting of Post-Tensioned Structures and testing requirements for Class A, B, C, and D grouts, prepared by Post-Tensioning Institute's Committee on Grouting Specifications. Typical application is in bridge construction, where material is pumped for long...

Read More »
Anti-Slip Tape comes in black, white, and gray.

Anti-Slip Tape comes in black, white, and gray.

Mop-Top(TM) tape, made of true mineral abrasive, minimizes fraying and disintegration of mops. Surface consists of tough grit that is durable and easy to clean with detergents. Both sponge and string style mops glide easily over Mop-Top, providing for fast cleanup and neat appearance. Anti-slip tape meets OSHA and ADA regulations.

Read More »
Charging System bonds materials electrostatically.

Charging System bonds materials electrostatically.

Model 3000 Autostat(R) uses forces of static electricity for adhering one material to another, such as temporary bonding of protective covering to metal sheets or wood paneling, spot pinning of over-wrapping material prior to heat sealing, edge pinning of web to einsure constant direction, and removal of air pockets during laminating. Power supply has variable output to insure highest degree of...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics