Adhesive Film adheres to silicon substrates.
Dublfilm(R) S972A thin polyester film is double coated with silicone pressure sensitive adhesive system for use on silicone substrates and other difficult to bond surfaces. Highly conformable, it has quick stick and strong holding power, making it suitable for automotive applications such as silicone foam and gasket bonding, high or low temperature gasket sealing, precision die cutting and...
Read More »
Spray Adhesives suit various applications.
White Lightning(R) WL03100 two-sided contact trim adhesive withstands 200 deg F. It forms fast, aggressive bonds that are water resistant. WL03101 repositionable adhesive provides clear, tape-like bonds with tack range up to 3 hrs. WL03102 fast tack adhesive forms fast, permanent bonds that are water resistant. WL03103 industrial strength adhesive dries in 1 minute and is heat resistant up to 120...
Read More »Conductive Adhesives may replace soldering.
Syon(R) Tru-Bond(R) 206A, 214, 215, and Tru-Cast(R) III electrically conductive adhesives and potting compounds can be used to form conductive paths in applications where hot soldering would be impractical. They also provide thermal conductivity and can be used to bond or seal components or wiring in applications requiring heat dissipation. Low-shrink and nonshrink epoxy and epoxide formulations...
Read More »
Epoxy System meets NASA low outgassing specfications.
EP30-2 low viscosity, two-component system produces high strength bonds that are resistant to thermal cycling and chemicals. Resin system is 100% reactive and does not contain any solvents or other volatiles. Shrinkage upon cure is -0.0003in/in. Hardened resin provides electrical insulation. EP30-2 cures clear and is suitable for sealing, bonding, and laminating applications. Service operating...
Read More »Adhesive Tapes for Energy & Utility Applications
Read about the various types of tapes used in energy and utility applications.
Read More »Adhesive/Sealant bonds and encapsulates.
MNRC 04-1347 UV light curing resin is based on aliphatic urethane acrylate monomer blend. At 1 mil thickness, it cures in 10 to 15 seconds with UV light. Transparent liquid is suitable for clear bonds or encapsulation. It bonds to metal, ceramic, glass, and many plastics. MNRC 04-1347 is thixotropic at 25 deg C, and cures to 40-50 Shore A with elongation of 150%. Operating temperature range is...
Read More »Rubber Seal always returns to original profile.
Clean Seal Plus closed cell foam rubber seal can be compressed up to 10 percent of its original profile and will expand back to its original shape and size. Rubber sealant is resistant to water absorption and heat. Product, available in various shapes and sizes, is also offered with 3M heat activated tape.
Read More »Adhesive/Sealant bonds most plastics.
MRC 04-1348 UV/Visible light curing adhesive/sealant is based on aliphatic urethane acrylate chemistry. It cures in 2 to 5 seconds with UV light to form bonds that are optically clear and resistant to yellowing, moisture, and some solvents. MRC 04-1348 is semi-thixotropic at 25 deg C, cures to 40 to 50 Shore D, and has operating temperature of -40 to 130 deg C. Transparent liquid is suitable for...
Read More »
Hybrid Adhesive bonds transportation body panels.
One-part, moisture-cure PERMABOND(R) HT20 provides instant tack and eliminates need for fasteners in securing side and roof panels. Panels can be aligned after initial tack. Its 500% elongation allows adhesive to absorb energy, alleviating stress on bond. Odor-free adhesive contains no isocyanates or solvents, and is fully VOC compliant to provide safe work environment.
Read More »Anaerobic Adhesive bonds many different metals.
LX10059 1-component adhesive cures two metal surfaces when confined in absence of air. It offers excellent alignment capabilities, and prevents movement of two surfaces bonded, eliminating erosion, wear, and pitting. LX10059 bonds with brass, copper, magnesium, iron, steel, aluminum, and nickel. It also exhibits excellent environmental and temperature resistance.
Read More »Adhesive creates strong bonds.
Fusionbond(TM) two-component, methacrylates adhesive bonds substrates such as ABS, nylon, PVC, gel coats, PBT blends, steel, and TeflonÃ-®. Overlap shear strength ranges from 950 psi on polycarbonate substrates to 5,000 psi on abraded steel coupons, and tensile strength is greater than 4,000 psi. It comes in easy to dispense dual-50 milliliter package with static mixer, in dual-400 milliliter...
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
