Epoxy cures at room temperature.

Epoxy cures at room temperature.

Two part EP21TDC-4 for bonding, sealing, and coating applications cures at ambient or elevated temperatures. It has high peel strength, elongation of over 300%, and forms bonds that resist vibration, impact, and shock, plus fuels, water, oils, and many chemicals. No solvents or diluents are emitted during cure. It adheres to natural rubber, neoprene, nitride, and SBR rubber compounds without...

Read More »

High-Strength Adhesive bonds thin metals.

Metal Welder(TM) structural methacrylate adhesive is designed for bonding metal to other metals or to dissimilar substrates. It provides impact and peel resistance on bare, painted, plated or galvanized metals. Adhesive cures at room temperature in 1 hour. It produces permanent, load-bearing bonds that are resistant to weathering, humidity, temperatures to 250 deg F, and thermal shock. Tensile...

Read More »
Low-Shrink Adhesives provide doublet and lens bonding.

Low-Shrink Adhesives provide doublet and lens bonding.

High-clarity, UV/visible light-curing adhesives offer viscosities from 300 to 25,000 cP and elongation from 120 to 175%. Fiber-optic adhesives include OP-52 medium-viscosity grade and OP-54 low-viscosity, wicking grade for butt bonding, bundling, and splitting. OP-18 may be peeled off like tape, and OP-19 and OP-19G are water soluble grades. Adhesives cure in seconds and offer moisture...

Read More »

Light-Curable Epoxies respond to visible and UV light.

Cationic Type V157 and V197 epoxies can be applied and irradiated with long-wave UV light in the range of 325-380 nm or with visible light in the range of 400-500 nm. Wide-range response lets adhesives be processed with many different existing light sources. Response to longer wave visible light is beneficial when bonding various engineering plastics such as Kapton and Lexan, which do not...

Read More »
Hot-Melt Adhesive shows how much has been applied.

Hot-Melt Adhesive shows how much has been applied.

PUR-FECT LOK(R) 34-969A polyurethane, reactive adhesive allows user to see if application device is dispensing correct amount based on shade of blue. Lighter shade indicates bond strength may not be sufficient and darker shade represents too much adhesive. Moisture-cured, 100% solids adhesive offers immediate handling strength and deflection resistance. Applications include assembly bonding,...

Read More »

Encapsulating Elastomers offer hydrolytic stability.

Two-component urethane series encapsulants have durometers from 25 to 55 Shore A. Unfilled materials maintain integrity over operating temperature range of -40 deg to 125 deg C. Glass transition temperature of -72 deg C makes them suitable for low temperature potting applications. They offer electrical insulation, thermal cycling stability, chemical resistance, and no shrinkage. Mixed viscosities...

Read More »
Silicone Material eliminates static buildup.

Silicone Material eliminates static buildup.

Semi-conductive Silicone C material is suitable for use on drive and label rollers, and can also be used in direct thermal printing applications. Resistivity is rated down to E9-E12 ohm-cm, and durometers range from 30 to 60 Shore A. Material can withstand 300 to 400Â-

Read More »
Mounting Tapes are available in black and white foams.

Mounting Tapes are available in black and white foams.

Duofoam(R) S846VA double-coated, polyethylene-foam mounting tape is coated with acrylic, pressure-sensitive adhesive. It suits mounting and bonding applications that require resistance to environmental extremes and provides holding power to irregular surfaces. Closed cell foam will not absorb water. Product bonds to metal and engineered-plastic surfaces, and is suitable for automotive, gasketing,...

Read More »

Epoxy and Adhesive are approved to military specifications.

ANAEBONd AB202 non-anaerobic adhesive is approved for field repair terminations. Suitable for bonding glass, its packaging allows for terminations in 2-3 minutes without heat. Fully cured material reduces pistoning in adverse environmental conditions. ANGSTROMBONdÂ-® AB9112 epoxy, approved to Mil A-24792A for use in OEM fiber optic terminations, will not cause cracking in multimode...

Read More »

Roll Splicing Tape works in printing applications.

EasySplice(TM) PrintLine straight line paster tape for roll-to-roll splicing eliminates glue, need for nose tabs, and possibility of glue contamination on cylinders and idler rollers. It uses standard application procedure regardless of press type, paper grade/weight, or web width.

Read More »

All Topics