Adhesives

BP 256 Ball Attach Adhesive

(Albany, NY) January 13, 2017 - BP 256 is YINCAE’s new ball attach adhesive product. BP 256 has been designed to enhance solder joint reliability and eliminate cleaning processes for LEAD-FREE ball bumping procedures on CSP, BGA, Flip chip, and PoP devices. It is compatible with current ball bumping processes. BP 256 is generally applied via printing or pin transfer methods and can replace...

Read More »
Light-Curable Adhesives Formulated with Encompass™ Technology to be Showcased at MD&M West
Adhesives

Light-Curable Adhesives Formulated with Encompass™ Technology to be Showcased at MD&M West

Torrington, Connecticut - January 16, 2017 - Dymax Corporation, a leading manufacturer of adhesives to the disposable medical device industry, will exhibit in Booth #2139 at MD&M West, scheduled to take place February 7-9, 2017 at the Anaheim Convention Center in Anaheim, CA. Their newest products and technologies - including solvent free, USP Class VI, and ISO 10993 biocompatible...

Read More »
EP42HT-2FG: Food Grade Epoxy System
Epoxies

EP42HT-2FG: Food Grade Epoxy System

Master Bond EP42HT-2FG is a two part epoxy that fully meets stringent FDA CFR 175.300 and FDA CFR 175.105 food grade testing specifications. It also meets the toxicological requirements of the NSF/ANSI 51 (2009) Standard for Food Equipment Materials as defined in section 4.1. This low viscosity system offers convenient handling and can be used for a wide variety of applications in the food...

Read More »
EP3HTND-2Med Black Curing Epoxy meets USP Class VI standards.
Epoxies

EP3HTND-2Med Black Curing Epoxy meets USP Class VI standards.

Available in ½ pints, pints, quarts, gallons and 5 gallon containers, EP3HTND-2Med Black Curing Epoxy features 5,000-6,000 psi tensile strength. Having 1,600-1,800 psi tensile lap shear strength at room temperature, product bonds to glass, metals and ceramics. Used in -60°F to +400°F temperature, material provides resistance to sterilization methods such as chemical sterilants, EtO, radiation...

Read More »
Biocompatible, Non-Drip Epoxy Resists Repeated Sterilizations
Epoxies

Biocompatible, Non-Drip Epoxy Resists Repeated Sterilizations

Master Bond EP3HTND-2Med Black is a high strength, fast curing epoxy for use in the assembly of medical devices. It fully meets USP Class VI specifications. This one part system delivers superior resistance to a variety of sterilization methods such as chemical sterilants, EtO, radiation and especially autoclaving. As a one component system, EP3HTND-2Med Black does not require any mixing and...

Read More »
Blades

ƐPS™ Fan Blade Extensions are chemical resistance tested.

Suitable for use in HVAC, ƐPS™ Fan Blade Extensions are compatible with all Multi-wing fans. With operating temperatures up to 280°F (120°C), extension can withstand loads of more than 1016 N/in. (40 N/mm). Tested for maximum durability in tough off-road applications, ƐPS increases efficiency up to eight percentage points and pressure up to 25 percent. Minimizing turbulence in blade, unit...

Read More »
Thermally Conductive, High Temperature Resistant Epoxy Passes NASA Low Outgassing Tests
Epoxies

Thermally Conductive, High Temperature Resistant Epoxy Passes NASA Low Outgassing Tests

Certified to meet ASTM E595 NASA low outgassing standards, Master Bond EP46HT-2AO Black is well suited for the aerospace, electronic, opto-electronic industries and can be used vacuum environments. This two component system blends thermal stability with a high strength profile for a variety of bonding, sealing and encapsulation applications. EP46HT-2AO Black combines superior thermal conductivity...

Read More »
AC Leak Freeze Pro Sealant Applicator comes with transparent hose.
Sealants

AC Leak Freeze Pro Sealant Applicator comes with transparent hose.

Applied in residential, commercial refrigeration and air conditioning systems, AC Leak Freeze Pro is 11.5” long refrigerant leak sealant applicator. Product consists of flexible and transparent refrigeration hose, attached copper reservoir containing 1.46-ounces of non-polymer, ac leak sealant formula and AC Leak Freeze injector. Product is used with 1.5 to 6 ton systems and comes in blue and...

Read More »
One Component Elastomeric System Features Excellent Thermal Conductivity
Adhesives

One Component Elastomeric System Features Excellent Thermal Conductivity

Master Bond X5TC is an elastomeric system that has a thermal conductivity of 10-12 BTU•in/ft2•hr•°F [1.44-1.73 W/m•K] while maintaining solid electrical insulation properties. This one part, no mix adhesive/sealant has a paste-like consistency and is very easy to use. It readily cures in 8-12 hours at room temperature or in 60-90 minutes at 150°F. X5TC bonds well to many substrates...

Read More »
Plexus Galvanized Bonder Adhesives for bonding hot-dip G60, G90.
Adhesives

Plexus Galvanized Bonder Adhesives for bonding hot-dip G60, G90.

Used to bond dissimilar substrates without requiring primers, Plexus Galvanized Bonder Adhesives cure instantly at room temperature. After curing, adhesives are strong and tough with resistance to sheer, peel and impact. Materials doesnot require external fasteners once cured. Product bonds galvanized metals like G60 and G90, plastics, composites, steel and aluminum.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers