New Adhesives & Sealants Products

Tape makes rivets, screws, and welds obsolete.

Model 3M(TM) VHB(TM) Tape can join dissimilar materials like plastic and metal, glass and metal, and aluminum and steel. It disperses pressure along entire length of seam, unlike rivet or joint where stress is concentrated in certain points. When bonding 2 unlike materials, it can resist differing co-efficients of thermal expansion. Tape prevents galvanic corrosion between metals and provides...

Protective Masking Tape suits wave solder applications.

Scapa 653 paper tape is single-coated with modified silicone pressure-sensitive adhesive. During hot air leveling and wave soldering operations, it provides protection against chemical solvents, solder, and rinse water while adhering to electronic substrates. Tape leaves no adhesive residue upon removal and is suited for low static protection of gold finger or rhodium PBC contacts, assembly...

Instant Adhesives cure on dry or acidic surfaces.

LoctiteÃ-® 4500(TM) and 4501(TM) surface insensitive cyanoacrylate adhesives bond metal, plastic, and elastomeric materials with acidic, porous, and absorbent surfaces. Single-component gel cyanoacrylate Loctite 4500 has consistency that prevents adhesive flow on vertical applications. Wicking viscosity, single component cyanoacrylate Loctite 4501 maintains cure speed for extended time...

Liquid Rust Preventive provides long-term protection.

DRI TOUCHÃ-® PLUS IRP3 penetrant and sealant works on impregnated and non-impregnated powdered metal parts, regardless of density or porosity of surface. Low viscosity liquid penetrates remaining porosity of powdered or sintered metals to displace moisture beneath surface. Once dry, it leaves semi-solid protective film that is absorbed by part itself. Protection levels range from 80-120 hr of...

Must-Ask Questions When Choosing a Foam Control Agent

This eBook discusses foam controlling agents and how to find the right one for your needs.

DVD Bonding System provides 1,000 W/cm-² peak pulse power.

CoolCureXL-DVDÃ-® Bonding System features pulsed UV curing lamps capable of 0.6 sec cure times for DVD-5 formats. Tilt management is achieved using lamps on top and bottom during curing process. Eliminating need for DVD repositioning while curing, system uses spiral-shaped lamps that match DVD profile and expose full disc to 1,000 W/cmÃ-² peak pulse power. Pulsed UV curing lamps provide...

Pipe Sealant forms flexible bonds.

Flex Bond(TM) two-component adhesive bonds flexible piping made of PVC, ABS, and other plastics. Once methacrylate polymer has been applied to 1 of 2 surfaces to be joined, activator can be sprayed on top of polymer or onto other surface. Working time is 3-4 min following activation. Flex Bond requires no mixing, attains functional cure in 1 hr at room temperature, and withstands temperatures to...

UV/Visible Sealants bond to PVC, PET, and R-PET plastics.

Intended for thermoformed plastic clamshell and tube packaging, Light-WeldÃ-® 3081 and 3082 Sealants cure upon exposure to UV light in seconds, allowing production line speeds up to 30 fpm. Products create crystal clear bonds and eliminate marking or discoloration that can occur with heat sealing RF or sonic welding. Solvent- and ODC-free, each adhesive comes in standard and thick viscosity...

Adhesive bonds high-temperature electrical components.

Ceramacast(TM) 586 is a zirconium-silicate based, phosphate-bonded, chemically-setting ceramic compound suited for bonding and potting infrared heaters, gas igniters, and filters in applications to 2800Ã-

Splicing Film withstands 400-

Scapa 512 pressure-sensitive splicing tape consists of polyester film, single-coated with silicone adhesive for use on silicone and other surfaces. Product can withstand prolonged exposure to temperatures as high as 350Ã-

Flexible Adhesive provides sag resistance.

Amber-colored, medium-viscosity LX30068 cures at room temperature, and offers heat cure option for applications where accelerated cure is desired. Rubber-like epoxy bonds difficult-to-bond materials in addition to traditional metals, plastics, and ceramics. It performs at high temperatures during thermal cycling and long-term exposures.

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.