Urethane Kit repairs damaged SBR conveyor belts.
Repair Kits

Urethane Kit repairs damaged SBR conveyor belts.

Available in 4 and 1.5 lb sizes, Devcon® R-Flex™ Belt Repair Kit is formulated to repair tears, gouges, and holes in styrene-butadiene rubber conveyor belts. Offering abrasion resistance, R-Flex urethane mixes as liquid and within 3–4 minutes becomes non-sagging, self-leveling putty with working time of 7–9 min and functional cure of 1.5 hr. Each kit includes R-Flex resin, curing...

Read More »
Metallizing Services

Metallization Pastes target lightly doped emitter cells.

Available for lightly doped and ultra lightly doped emitter cells, respectively, SOL9621 Series and SOL9620 Series enable cell manufacturers to further optimize c-Si cells' conversion efficiencies. SOL9620 Series, with surface doping concentrations down to 1xE20/cmÂ-³, has ability to be fired at peak temperature 15 K less than standard firing temperatures, making it suitable for PERC...

Read More »
Save 25-40% on your Energy Costs by Sealing your Ducting
Sealants

Save 25-40% on your Energy Costs by Sealing your Ducting

Interior Maintenance Company, in Lansdowne, PA, has added AeroSeal Duct Sealing technology to better service its customers.Â-  Duct sealing in commercial buildings is a cost effective method which saves energy, improves air balance and thermal distribution (comfort and ventilation), helps comply with building codes and reduces cross contamination between different zones in a building The...

Read More »
Sealants

Dow Corning Introduces Premium Window and Door Sealant for China's Professional Building Trades

-- 100% silicone performance, competitively priced SHANGHAI, -- To meet the performance and profitability needs of the professional building trades in China, Dow Corning Corporation – a global leader in silicones, silicon-based technology and innovation – has introduced a competitively priced premium silicone sealant for residential windows and doors. New Regal(TM) High Modulus Acetoxy...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Adhesives

Fabrico Medical to Exhibit Advanced Medical Converting Capabilities at MD&M East 2014

Rochester, NY – Fabrico Medical, a premier provider of converted materials and advanced assembly for the design-to-manufacture of medical devices and disposables, announces its participation in the MD&M East conference, Booth #749, at the Jacob K. Javits Convention Center, June 10 – 12, 2014 in New York, NY. Fabrico Medical works with medical OEMs and contract manufacturers to test and...

Read More »
Adhesives

Vancive Medical Technologies(TM) to Exhibit Benehold(TM) Absorbent Wound Dressings at European Wound Management Association

Learn More at Booth 10A10 CHICAGO – Vancive Medical Technologies™ will exhibit at the 24th Conference of the European Wound Management Association (EWMA), 14-16 May, 2014 at the IFEMA, Madrid in Madrid, Spain. Exhibiting at EWMA marks the official launch of BeneHold Absorbent Wound Dressings in Europe," said Colleen Ward, Vice President Global Marketing. "Our products have been shown to...

Read More »
Epoxies

Two Component, Thermally Conductive Epoxy Resists High Temperatures

Formulated for bonding and sealing applications, Master Bond EP46HT-1AO is widely used in the aerospace, electronic and specialty OEM industries. Unlike most conventional two component epoxies, EP46HT-1AO cures with the addition of heat, which allows it to have a working life exceeding 24 hours. It has a forgiving 100 to 30 mix ratio by weight and bonds well to metals, composites, glass, ceramics...

Read More »
The Relationship between the Hot Tack of Packaging Material and Filling Efficiency
Adhesives

The Relationship between the Hot Tack of Packaging Material and Filling Efficiency

The hot sealing performance of packaging materials is the main parameter to assess packaging ability of materials. It includes the hot tack and ultimate strength. Hot tack has been used to check the strength to peel off hot sealing parts, when shortly after hot sealing (not cold yet). Ultimate strength has been used to check the strength to peel off the hot sealing parts, when the parts have...

Read More »
Photovoltaic Equipment

Heraeus to Attend SNEC 8th (2014) International Photovoltaic Power Generation Conference & Exhibition

Market introduction of two news pastes for ultra-lowly doped emitter cells and announcement of new production site for front-side silver paste SHANGHAI, ChinaÂ- – The Heraeus Photovoltaics Business Unit will be attending the SNEC (2014) International Photovoltaic Power Generation Conference Exhibition on May 20th through May 22nd, 2014. Heraeus will highlight several of its newest...

Read More »
Potassium Silicate Binder produces high-temperature coatings.
Adhesives

Potassium Silicate Binder produces high-temperature coatings.

Inorganic, water-dispersed Ceramabind™ 643-1, resistant to temperatures to 3,000°F, mixes with range of oxide and metallic powders into inert, electrically, chemically, and wear-resistant material that will not outgas under ultra high vacuum (UHV). Typical uses include formulating corrosion protective coatings for high-temperature metal structures as well as producing chemically resistant...

Read More »

All Topics