Foster Corporation Launches Lazermed Laser Marking Technology that Offers High Resolution and Durable Printing Capability
Offers permanent, easily readable and eco-friendly alternative to solvent based printing technologies for medical device applications. Weather durable, available for high temperature applications and have passed USP Class VI testing. Used for injection molded, extruded, and blow molded components.
Read More »
AGC to Expand Production of Fluon+ EA-2000 Resin Used in High-Frequency Printed Circuit Boards
Exton, Pa., January 22, 2019 – AGC is significantly expanding its production capacity of Fluon+ EA-2000 fluorinated resin by establishing a new facility at its plant in Chiba, Japan. Fluon+EA-2000 is primarily used as a material for 5G high-speed, high-frequency printed circuit boards, which will see a sharp increase in demand as 5G network technology becomes widely available by 2020....
Read More »
New Kortrax Barrier Resin Uses Quoral Platform That Improve Oxygen Transfer Rate of HDPE Containers
The Kortrax® Barrier Resin is designed for food applications that require resin to prevent permeation and oxygen contamination. The resin is offered with optical tracer features that identifies the presence within Baritainer® using UV flashlight. The products act as the barrier to liquid product packaged within the walls of HDPE container. The Kortrax® Baritainers® are sustainable,...
Read More »
Rovema Offers BVC 145 TwinTube Form-Fill-Seal Machine That Produces Up to 500 Bags Per Minute
The BVC 145 TwinTube Form-Fill-Seal Machine features separate film drive control on each side of the machine. The machine is embedded with Sense and Seal technology for detecting products in the seal area to prevent poorly or incompletely sealed bags. It is offered with swiveling double safety doors and come in 2.85 m x 1.325 m footprint. The unit produces bags up to 45 mm wide and 220 mm long...
Read More »
Advantages of Nylon Washers and Other Non-Metallic Materials
Check out this white paper to learn about the types of non-metallic washers.
Read More »
Polyplastic Introduces New DURANEX 532AR PBT Resin That is Treated with Hydrolysis-Resistant Formula
The New DURANEX 532AR Polybutylene Terephthalate Resin is suitable for use in parts installed in chassis section and lower areas of vehicles that come into contact with chemicals such as snow melting agents. The resin provides improved hydrolysis and heat-shock resistance and electrical performance. It is capable of withstanding harsh environments and reduces the risk of cracking in molded...
Read More »
New Cushion Grip Denture Adhesive is Zinc-Free and Non-Toxic
The Cushion Grip™ Thermoplastic Denture Adhesive is offered in 1 oz tube and is manufactured from thermoplastic polymers that are heat activated and 100% waterproof. The product on one application can hold dentures for up to 4 days.
Read More »New TPE Compound Grades from Colorite are Durable
Colorite is adding 12 new grades to its Cellene® thermoplastic elastomer (TPE) compounds. The line previously had 28 grades and was used in healthcare and medical device manufacturing. The compounds are available in four series: 1,000 (extrusion grades for IV therapy with high clarity, improved bonding and kink resistance); 2,000 (injection molding and extrusion grades targeting cost-driven IV...
Read More »
Master Bond Launches EP3UF-1 Underfill Epoxy with Dielectric Constant of 4.5
The EP3UF-1 Thermally Conductive Underfill Epoxy is offered in 10 cc syringes and 30 cc syringes. The product features viscosity of 5,000-15,000 cps, compressive strength of 18,000-20,000 psi and tensile modulus of 450,000-500,000 psi. The compound exhibits thermal conductivity and resistance of 1.30-1.44 W/(m•K) and 5-7 x 10-6 K•m²/W respectively. The epoxy cures in 20-30 minutes at 250°F,...
Read More »
Master Bond Offers MasterSil 980 Fluorosilicone with a Dielectric Constant of 6.4
The MasterSil 980 Two Part Fluorosilicone is suitable for high performance bonding, sealing, coating and potting applications. The product features an elongation of 100-200% at 75°F and provides an operating temperature of -85°F to +465°F. The adhesive bonds with metals, composites, ceramics, glass, rubbers, plastics and silicones and has a volume resistivity of more than 10^14 ohm-cm. It can...
Read More »
New Vinyl Hybrid Resin from Perma-Liner is Formulated with Zero Styrene
The Vinyl Hybrid Resin is resistant to sag and draining around vertical surfaces and reinforcement. The product features pot life of more than eight hours and allows hot water or cool water to be cured at minimum temperature of 140°F held for 28 minutes. It can be used in areas such as schools, hospitals, churches and office buildings. The vinyl hybrid resin features a high-rigid polymer...
Read More »
TPA Motion Introduces Industry's First Compact Robotic Positioner for Medical Devices
TPA Motion's microplate handling robots are designed specifically for medical instruments and lab automation devices. Check out the video to learn more.
Read More »
