New Vinyl Hybrid Resin from Perma-Liner is Formulated with Zero Styrene
Resins

New Vinyl Hybrid Resin from Perma-Liner is Formulated with Zero Styrene

The Vinyl Hybrid Resin is resistant to sag and draining around vertical surfaces and reinforcement. The product features pot life of more than eight hours and allows hot water or cool water to be cured at minimum temperature of 140°F held for 28 minutes. It can be used in areas such as schools, hospitals, churches and office buildings. The vinyl hybrid resin features a high-rigid polymer...

Read More »
Creative Materials Introduces 127-30HV Silicone Adhesive for Coating, Printing, Fastening and Bonding Applications
Adhesives

Creative Materials Introduces 127-30HV Silicone Adhesive for Coating, Printing, Fastening and Bonding Applications

Creative Materials has introduced the new 127-30HV silicone adhesive. It is a flexible, re-workable, electrically conductive silicone-based adhesive, ink, and coating. It balances adhesion, cohesion, printability and high-temperature performance for coating, printing, fastening and bonding applications. 127-30HV is suitable for high reliability interconnects stretchable conductive features,...

Read More »
Resins

PES Increasingly Preferred for Hollow-Fiber & Cast-Membrane Filter Media

Engineering thermoplastic provides superior properties for fluid handling in applications ranging from dialysis equipment to water-treatment filters Phoenix, Ariz., U.S. — The engineering thermoplastic polyethersulfone (PES) is increasingly the choice to produce hollow fibers for fluid transport and cast membranes for filtration applications thanks to its high mechanical, chemical, and thermal...

Read More »
New EP17HTND-CCM Epoxy Exhibits a Thermal Conductivity of 1.4423 W/(m.K) at 75 Degrees F
Epoxies

New EP17HTND-CCM Epoxy Exhibits a Thermal Conductivity of 1.4423 W/(m.K) at 75 Degrees F

Master Bond’s EP17HTND-CCM Single Component Epoxy features a resistivity of more than 10^15 ohm-cm at 75°F and over 10^12 ohm-cm at 400°F. The compound can be used in -80°F to +600°F temperature and forms high strength bonds to substrates such as metals, ceramics, plastics, composites and circuit board materials. The material is offered in syringes with sizes ranging from 10 cc to 30 cc and...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Permatex Offers ScrewGlue Repair Gel That Uses Non-Drip Clinging Formula
Adhesives

Permatex Offers ScrewGlue Repair Gel That Uses Non-Drip Clinging Formula

The ScrewGlue Repair Gel is used for fixing damaged and stripped screws and threaded holes in household items. The clinging formula of the gel makes it suitable for use overhead and hard-to-reach places. The gel helps in preventing screws and bolts from future loosening caused due to vibration, frequent use, thread corrosion and exposure to the elements. The product is used for repairing cabinet...

Read More »
EV Group Partners with Plessey to Drive GaN-on-Silicon Monolithic MicroLED Technology for AR Applications
Bonders

EV Group Partners with Plessey to Drive GaN-on-Silicon Monolithic MicroLED Technology for AR Applications

PLYMOUTH, England, November 12, 2018 /PRNewswire/ -- Plessey, a leading developer of award-winning optoelectronic technology solutions, announces a collaboration with EV Group (EVG), a leading supplier of wafer bonding and lithography equipment for the MEMS, nanotechnology and semiconductor markets, to bring high-performance GaN-on-Silicon (GaN-on-Si) monolithic microLED technology to the mass...

Read More »
Signode Introduces Orbital Stretch Wrapper and SP-304 Sealer for Improving Product Integrity
Sealing Equipment

Signode Introduces Orbital Stretch Wrapper and SP-304 Sealer for Improving Product Integrity

The H. BÖHL stretch wrapper with orbital design dispenses stretch film over and under the product and secures the product tightly to the tray. The Loveshaw Little David Case Sealer SP-304 sealer features an automated thee flap folder with universal bottom flap folding bars. The sealer is equipped with interchangeable tape cartridges and top squeezer rollers. The automated CaseLocker ST™ tape...

Read More »
New UV26 UV Curable Adhesive Features a Refractive Index of 1.55 at Room Temperature
Adhesives

New UV26 UV Curable Adhesive Features a Refractive Index of 1.55 at Room Temperature

The Master Bond’s UV26 UV Curable Adhesive has a glass transition temperature (Tg) ranging from 160 to 170°C. The compound is suitable for use on substrates such as glass, surface treated metals and plastics. The product can cure compounds of viscosity ranging from 250-1,500 cps when exposed to UV light source at a wavelength of 320-365 nm. It can withstand chemicals such as acids, bases,...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers