One Part Epoxy has Low CTE
Epoxies

One Part Epoxy has Low CTE

Adhesive EP13LTE Passes NASA Low Outgassing Well suited for structural bonding applications, EP13LTE offers excellent adhesion to dissimilar substrates and has a stellar physical strength profile. This NASA low outgassing approved system is easy to use, doesn’t require mixing, and has an unlimited working life at room temperature. It also features high temperature resistance, dimensional...

Read More »
Adhesives for Your Specific Needs
Epoxies

Adhesives for Your Specific Needs

EP45HTAN: Thermally Conductive, Electrically Insulative Epoxy Well suited for metal bonding especially roughened titanium, EP45HTAN is a two part epoxy paste with superior strength retention at elevated temperatures. It bonds well to a wide variety of similar/dissimilar substrates, such as multiple metals, glass, composites and many plastics. This system combines cryogenic serviceability with...

Read More »
Controls and Controllers

Motion Control Solutions for Tube Mills and Rollformers.

UCG builds new control systems, die accelerators, drives and other accessories to retrofit new or existing machinery in almost any industrial environment. We have the knowledge to offer you a complete turn-key system from the initial design to start-up. Located under one roof with a leading used machinery dealer, Universal Tube & Rollform Equipment Corporation, our unique relationship enables us...

Read More »
Master Bond EP3HTSDA-1 for Die Attach Applications
Epoxies

Master Bond EP3HTSDA-1 for Die Attach Applications

Premier die attach epoxy EP3HTSDA-1 features a very impressive thermal conductivity of 40-45 BTU•in/(ft²•hr•°F), substantially higher than other silver conductive epoxies. This video demonstrates how Master Bond EP3HTSDA-1 is dispensed and applied to a defined area without any tailing. Watch Video on EP3HTSDA-1: http://click.skem1.com/click/koc3k-cbupji-13mg5467/ Updated Electronic...

Read More »
Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity
Epoxies

Electrically Conductive Die Attach Adhesive Has Very High Thermal Conductivity

Master Bond EP3HTSDA-1 is a single part, no mix epoxy adhesive designed primarily for die attach applications. It exhibits a die shear strength of 20-22 kg-f and has a high thermal conductivity of over 40-45 BTU•in/ft2•hr•°F [5.7-6.5 W/(m•K)]. “This 100% solids formulation has an ideal viscosity and flow for die attach, will not ‘tail’ and can be easily dispensed automatically”...

Read More »
Encapsulants

SMT 158HA Liquid Encapsulant offers a CTE of 20 ppm/K.

Designed for large component with small bumps, SMT 158HA Liquid Encapsulant offers 156°C glass transition temperature and high adhesion strength. Unit’s high viscosity allows air to escape from gaps in underfilling processes. SMT 158HA provides conditions to enable void free underfill and enable the devices to exhibiting lower thermal stress.

Read More »
Applications in Research Labs and Commercial Use for EP29LPSP
Epoxies

Applications in Research Labs and Commercial Use for EP29LPSP

Ideal for demanding cryogenic environments, two-part EP29LPSP can withstand temperatures as low as 4K and can resist cryogenic shock when, for instance, it is cooled from room temperature to cryogenic temperatures within a 5-10 minute window. In over a dozen published research articles, patents, and manufacturers’ specifications, scientists and engineers have identified EP29LPSP for use in...

Read More »
Master Bond EP110F8-5 Epoxy offers pot life of 2-3 days.
Epoxies

Master Bond EP110F8-5 Epoxy offers pot life of 2-3 days.

Master Bond EP110F8-5 Epoxy offers Shore D hardness of 70-80 and elongation of 40-60%. Unit is operated in a temperature range of -100°F to +300°F and is available in ½ pint, pint, quart, one and 5 gallon containers. Product provides volume resistivity more than 1015 ohm-cm, dielectric constant of 2.91 and a dissipation factor of 0.009 at 1 KHz. Master Bond EP110F8-5 can stick on metals,...

Read More »
Toughened, Two Component Epoxy Features Enhanced Dimensional Stability and a Long Working Life
Epoxies

Toughened, Two Component Epoxy Features Enhanced Dimensional Stability and a Long Working Life

Developed for potting, sealing, encapsulation and casting applications, Master Bond EP110F8-5 is dimensionally stable and has low shrinkage upon cure. This system features superior electrical insulation properties including a volume resistivity exceeding 1015 ohm-cm, a dielectric constant of 2.91 at 1 KHz and a dissipation factor of 0.009 at 1KHz. “EP110F8-5 is an easy to use, heat curing epoxy...

Read More »
Finding Strongest Adhesives for Nylon Bonding
Epoxies

Finding Strongest Adhesives for Nylon Bonding

Lap Shear Strength of Adhesives for Nylon to Nylon Bonding Master Bond tested the tensile lap shear strength of several epoxy products to determine their capability in nylon to nylon bonding applications. The testing produced impressive results with many systems delivering high values. While high strength is often crucial, each system also offers a diverse range of other properties that must be...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers