SK Telecom Deploys Xilinx FPGAs for AI Acceleration, Achieves 5X Performance/16X Performance-Per-Watt Over GPUs
Accelerators

SK Telecom Deploys Xilinx FPGAs for AI Acceleration, Achieves 5X Performance/16X Performance-Per-Watt Over GPUs

SAN JOSE, Calif. and SEOUL, South Korea, Aug. 15, 2018 /PRNewswire/ -- Xilinx, Inc. (NASDAQ: XLNX) and SK Telecom (SKT) today jointly announced that SKT has deployed Xilinx® FPGAs as their artificial intelligence (AI) accelerators in its data center. The Xilinx® Kintex® UltraScale™ FPGAs are now running SKT's automatic speech-recognition (ASR) application to accelerate NUGU, its...

Read More »
New EP70CN Epoxy Adhesive Exhibits a Tensile Strength of 11,000 to 12,000 psi
Epoxies

New EP70CN Epoxy Adhesive Exhibits a Tensile Strength of 11,000 to 12,000 psi

Master Bond’s EP70CN Epoxy Adhesive is available in 1/2 pint, pint, quart and gallon kits and is used for bonding, sealing, coating and potting applications. The product offers a tensile modulus of 300,000 to 350,000 psi and features a glass temperature transition temperature of 130 to 135°C and viscosity of 2,500 to 5,000 cps. The adhesive bonds to substrates such as metals, ceramics and...

Read More »
New 20-3035 Syntactic Epoxies are Resistant to Thermal and Mechanical Shock
Encapsulants

New 20-3035 Syntactic Epoxies are Resistant to Thermal and Mechanical Shock

The 20-3035 Syntactic Epoxy is offered in ready-to-use FreezeBond® premixed and frozen syringe. The product is made by incorporating hollow glass microspheres into a proprietary resin blend. The epoxy is designed for various curing agents for creating thermally insulative and lightweight casting. This compound exhibits low dielectric constant, low shrinkage on cure, low moisture absorption,...

Read More »
New 70-3812NC Epoxy Adhesive Meets NASA Outgassing Stamdards as per ASTM E-595-07
Adhesives

New 70-3812NC Epoxy Adhesive Meets NASA Outgassing Stamdards as per ASTM E-595-07

The 70-3812NC Aluminum Filled Epoxy Adhesive is designed for bonding heat sinks, which require high thermal conductivity and strong structural bonds. The product is cured at room temperature with mild heat and the 10:1 mix ratio used for batch mixing. The 70-3812NC adhesive is suitable for heat sink bonding applications such as fin to base, folded-fin set to base, pin-fin set to base and cold...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Two-Component Potting Compound from DELO Protects Sensors
Adhesives

Two-Component Potting Compound from DELO Protects Sensors

DELO-DUOPOX CR8031 safeguards electronic components from damage caused by chemicals Technical Specifications Good adhesion to different plastics, including polyamide and ABS Compression shear strength of 20 MPa on polyethylene Withstand temperatures up to 180°C Mechanical properties remain the same at 85°C and 85% air humidity Sudbury, MA November 2017 – DELO, one of the world’s leading...

Read More »
Aeroseal Duct Sealing Wins 2018 Dealer Design Award
Sealing Equipment

Aeroseal Duct Sealing Wins 2018 Dealer Design Award

The New Aeroseal HomeSeal Connect Duct Sealing System Recognized As An Industry Innovation Offering An Ideal Revenue Source For HVAC Contractors CENTERVILLE, OHIO (PRWEB) JULY 25, 2018 - Aeroseal LLC today announced that their HomeSeal Connect duct sealing system was selected as a winner in the 2018 Dealer Design Awards (DDA), an industry coveted honor presented each year by The Air...

Read More »
No Fish Story - PENETRON Keeps Hatchery Tanks Intact
Waterproofing Materials

No Fish Story - PENETRON Keeps Hatchery Tanks Intact

EAST SETAUKET, N.Y. (PRWEB) July 23, 2018 The July 2018 inauguration of a new fish hatchery in the Republic of Tatarstan, Russia, will provide the region’s rivers, lakes and fish farms with a local supply of fish. PENETRON and PENECRETE MORTAR crystalline materials were used to safely waterproof the fish tanks. Located in the Laishevsky district of western Tatarstan, the fish hatchery will have...

Read More »
New EP21ND-LP Epoxy Adhesive Provides Tensile Strength Between 6,000 and 7,000 psi
Adhesives

New EP21ND-LP Epoxy Adhesive Provides Tensile Strength Between 6,000 and 7,000 psi

Master bond’s EP21ND-LP Epoxy Adhesive is formulated for structural bonding applications and features working life of 2-4 hrs at 75°F for a 100 gram mass. Capable to withstand thermal cycling, product exhibits a coefficient of thermal expansion of 50-55 x 10^-6/in/in/°C and electrical insulation with volume resistivity of greater than 10^14 ohm-cm. The adhesive is suitable for use in...

Read More »
Northstar Introduces New Resin Formulas for Mold-Making Applications
Resins

Northstar Introduces New Resin Formulas for Mold-Making Applications

Mold-Making Resins are available in MPP-A25E, MPP-A40E and MPP-A50E formulas with hardness of 25A, 40A and 50A and tensile strength of 389, 867 and 1300 psi respectively. These resins are used in applications such as concrete veneer/fascia and precast concrete products. MPP-A25E formula features a die-C tear resistance of 90 pli and a mixed viscosity of 1650 cps whereas MPP-A40E resin formula...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics