
New VHB Tape LSE Series from 3M is Available in 0.6, 1.1, and 1.6 mm. Thicknesses
Made of double-sided acrylic foam that creates a long-lasting, high-strength bond, and performs well across a wide temperature range. Offers high initial tack at low temperatures such as outdoor applications or unheated factory floors. Ideal for LSE substrates like Polypropylene (PP), Thermoplastic Olefins (TPO), Thermoplastic Elastomers (TPE), glass reinforced plastic (GRP) and fiber reinforced...
Read More »AGC Chemicals Americas to Present on High-Gloss Direct-to-Metal Waterborne Coatings
EXTON, Pa., February 4, 2020 – AGC Chemicals Americas Inc. will present on the latest developments in corrosion-resistant FEVE water-based coatings formulations at the 2020 Waterborne Symposium. Donald Lawson, technical development chemist, will discuss high-gloss direct-to-metal waterborne coatings and evaluate corrosion inhibitors with blends of various waterborne acrylic and FEVE...
Read More »DuPont Interconnect Solutions Introduces New Pyralux® and Riston® Products
New Products Address Needs in 5G; Will Be Featured at Upcoming IPC APEX Show Wilmington, Del. (PRWeb) February 03, 2020 -- DuPont Interconnect Solutions announced today that it is introducing several new products across its DuPont™ Pyralux® and Riston® product families to address a diverse set of needs for both the manufacture and performance of advanced electronics devices. DuPont will...
Read More »
New Dental and Medical Products for Patient and Clinician
ZR-Cem contains 10-MDP, which enables a strong bond to all ceramic materials, dentin and enamel. Premier Implant Cement Plus provides strong secure retention yet enables non-destructive crown retrieval if necessary at a later date. Sleeve-It feature a pre-cut opening to pass through the dispensing tip.
Read More »
Adhesive Tapes for Personal Protective Equipment Applications
This ebook provides an in-depth overview into adhesive tapes for personal equipment applications.
Read More »
New EP17HTS-DA Die Attach Epoxy Meets MIL-STD-883J Requirements
Offers high die shear strength of 35-40 kg-f at room temperature that is electrically conductive and can withstands high temperatures. Features low volume resistivity of less than 0.005 ohm-cm. Requires heat cure of 300°F for 2 to 3 hours, followed by post curing at 350°F for 1 to 2 hours.
Read More »
New Turftak Range of Adhesives Produce Zero Volatile Organic Compounds
Turftak 1 is simple to use single-component polyurethane adhesive that requires no mixing, sets fast and is resistant to moisture and shock. Turftak2 promotes complete control over the bonding process eliminating pesky environmental factors such as heat and humidity-a common problem in the industry. Turftak-SMP, a single-component moisture cure adhesive can be used with GA3 Applicator to provide...
Read More »
Naples Apartments Stay Dry with Penetron Crystalline Technology in the Mix
EAST SETAUKET, N.Y. (PRWEB) JANUARY 21, 2020 - Launched in late 2019, the Legacy Naples Apartments are an upscale, gated rental community that offers the classic Florida lifestyle on the Gulf Coast. The below-grade concrete structures of the five residential buildings are waterproofed with Penetron’s crystalline technology. Perched on the Gulf of Mexico in southwest Florida, Naples is a...
Read More »
New MIND-L 1000 Induction Hardening System Comes with eldec Quality Control (eQC)
Offers overall package for workpieces of up to 200 mm. in diameter and a maximum length of 800 mm. Features X, Y and Z-axes to position the inductors, and up to five temperature and flow-monitored sprinkler heads. Available in low, medium, high and dual frequency generators with power output of 10 to 3,000 kW.
Read More »
Dechlorination Simplified with a Penetron-Treated Cistern
East Setauket, N.Y. (PRweb) January 14, 2020 - The Aquatic Center upgrade (new cistern and support building) to the Cate School in Carpinteria (CA) was completed in January 2020. Penetron provided the key waterproofing technology to ensure durable concrete structures. Founded in 1910, the Cate School is a four-year, coed high school in Carpinteria, Southern California. Highly selective, the...
Read More »
New Epoxy Polysulfide Adhesive Resists Temperatures up to 350 degree F
EP21TPHT offers high lap shear strength of 1,600-1,800 psi and bonds to a variety of substrates including metals, composites and rubbers. Withstands exposure to a wide range of chemicals including but not limited to fuels, oils, hydrocarbons and hydraulic fluids. Available for use in double barrel syringes and gun dispensers as well as in 1/2 pint, pint, quart or gallon container kits.
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »