New 20-3035 Syntactic Epoxies are Resistant to Thermal and Mechanical Shock
Encapsulants

New 20-3035 Syntactic Epoxies are Resistant to Thermal and Mechanical Shock

The 20-3035 Syntactic Epoxy is offered in ready-to-use FreezeBond® premixed and frozen syringe. The product is made by incorporating hollow glass microspheres into a proprietary resin blend. The epoxy is designed for various curing agents for creating thermally insulative and lightweight casting. This compound exhibits low dielectric constant, low shrinkage on cure, low moisture absorption,...

Read More »
New 70-3812NC Epoxy Adhesive Meets NASA Outgassing Stamdards as per ASTM E-595-07
Adhesives

New 70-3812NC Epoxy Adhesive Meets NASA Outgassing Stamdards as per ASTM E-595-07

The 70-3812NC Aluminum Filled Epoxy Adhesive is designed for bonding heat sinks, which require high thermal conductivity and strong structural bonds. The product is cured at room temperature with mild heat and the 10:1 mix ratio used for batch mixing. The 70-3812NC adhesive is suitable for heat sink bonding applications such as fin to base, folded-fin set to base, pin-fin set to base and cold...

Read More »
Two-Component Potting Compound from DELO Protects Sensors
Adhesives

Two-Component Potting Compound from DELO Protects Sensors

DELO-DUOPOX CR8031 safeguards electronic components from damage caused by chemicals Technical Specifications Good adhesion to different plastics, including polyamide and ABS Compression shear strength of 20 MPa on polyethylene Withstand temperatures up to 180°C Mechanical properties remain the same at 85°C and 85% air humidity Sudbury, MA November 2017 – DELO, one of the world’s leading...

Read More »
Aeroseal Duct Sealing Wins 2018 Dealer Design Award
Sealing Equipment

Aeroseal Duct Sealing Wins 2018 Dealer Design Award

The New Aeroseal HomeSeal Connect Duct Sealing System Recognized As An Industry Innovation Offering An Ideal Revenue Source For HVAC Contractors CENTERVILLE, OHIO (PRWEB) JULY 25, 2018 - Aeroseal LLC today announced that their HomeSeal Connect duct sealing system was selected as a winner in the 2018 Dealer Design Awards (DDA), an industry coveted honor presented each year by The Air...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
No Fish Story - PENETRON Keeps Hatchery Tanks Intact
Waterproofing Materials

No Fish Story - PENETRON Keeps Hatchery Tanks Intact

EAST SETAUKET, N.Y. (PRWEB) July 23, 2018 The July 2018 inauguration of a new fish hatchery in the Republic of Tatarstan, Russia, will provide the region’s rivers, lakes and fish farms with a local supply of fish. PENETRON and PENECRETE MORTAR crystalline materials were used to safely waterproof the fish tanks. Located in the Laishevsky district of western Tatarstan, the fish hatchery will have...

Read More »
New EP21ND-LP Epoxy Adhesive Provides Tensile Strength Between 6,000 and 7,000 psi
Adhesives

New EP21ND-LP Epoxy Adhesive Provides Tensile Strength Between 6,000 and 7,000 psi

Master bond’s EP21ND-LP Epoxy Adhesive is formulated for structural bonding applications and features working life of 2-4 hrs at 75°F for a 100 gram mass. Capable to withstand thermal cycling, product exhibits a coefficient of thermal expansion of 50-55 x 10^-6/in/in/°C and electrical insulation with volume resistivity of greater than 10^14 ohm-cm. The adhesive is suitable for use in...

Read More »
Northstar Introduces New Resin Formulas for Mold-Making Applications
Resins

Northstar Introduces New Resin Formulas for Mold-Making Applications

Mold-Making Resins are available in MPP-A25E, MPP-A40E and MPP-A50E formulas with hardness of 25A, 40A and 50A and tensile strength of 389, 867 and 1300 psi respectively. These resins are used in applications such as concrete veneer/fascia and precast concrete products. MPP-A25E formula features a die-C tear resistance of 90 pli and a mixed viscosity of 1650 cps whereas MPP-A40E resin formula...

Read More »
DuPont™ FlexWrap™ EZ Adhesive Tape Selected as Parade of Products Award Winner
Adhesive Tapes

DuPont™ FlexWrap™ EZ Adhesive Tape Selected as Parade of Products Award Winner

Uniquely designed self-adhered flashing tape wins PCBC award for innovative air-sealing solution of penetrations on exterior walls. WILMINGTON, DEL. (PRWEB) JUNE 25, 2018 - DuPont Performance Building Solutions today announced that its DuPont™ FlexWrap™ EZ solution was named a winner of The Best of PCBC: 2018 Parade Of Products, an awards program designed to honor outstanding achievements...

Read More »
New EP30LTE-2 Epoxy Offers a Compressive Strength of 24,000-26,000 psi
Epoxies

New EP30LTE-2 Epoxy Offers a Compressive Strength of 24,000-26,000 psi

Master Bond’s EP30LTE-2 Epoxy is offered in ½ pint, pint, quart, gallon and 5 gallon kits in premixed and frozen syringes. The epoxy is used for joining dissimilar substrates that are exposed to thermally and mechanically induced stresses. Product features a low CTE at 10-13 x 10^-6/in/in/°C and a volume resistivity of more than 10^15 ohm-cm for use in electrical insulator. EP30LTE-2 features...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics