Oscillators

Voltage Controlled Oscillator operates at 3,650 MHz.
Oscillators

Voltage Controlled Oscillator operates at 3,650 MHz.

Operating with control voltage range of 0.5~4.5 V, Model CVCO55CC-3650-3650 features typical phase noise of -108 dBc/Hz at 10 KHz offset and typical output power of +7 dBm.Â- Input voltage is 8.0 V, with current consumption of 35 mA. Pulling and Pushing are minimized to 1.0 MHz and 0.2 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, VCO is suited for digital radio equipment, fixed...

Read More »
VCO: CRO0900A-LF Ideal for Low Noise Mobile Radio Solutions
Oscillators

VCO: CRO0900A-LF Ideal for Low Noise Mobile Radio Solutions

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage Controlled Oscillator) model CRO0900A-LF. The CRO0900A-LF operates at 895 to 905 MHz with a tuning voltage range of 0 to 5 Vdc. This innovative VCO features a spectrally clean signal of -120 dBc/Hz @ 10 kHz offset and a typical tuning sensitivity of 5 MHz/V. The CRO0900A-LF is designed to deliver +3 dBm of output power into a 50Ω...

Read More »
VCO: High Performance V614ME28-LF Features Excellent Phase Noise for VSAT Systems
Oscillators

VCO: High Performance V614ME28-LF Features Excellent Phase Noise for VSAT Systems

Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage Controlled Oscillator) model V614ME28-LF. The V614ME28-LF operates over the frequency range of 1650 to 2410 MHz within 2 to 14V of tuning. This unmatched VCO features a spectrally clean signal of -96 dBc/Hz @ 10 kHz offset while operating off a 12 Vdc supply and drawing 20 mA of current. The low cost V614ME28-LF is designed to...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Ceramic Resonator VCO saves board space.
Oscillators

Ceramic Resonator VCO saves board space.

Covering 1,800 MHz frequency within tuning voltage range of 0.5–4.5 Vdc, Model TRO1800A-LF features spectrally clean signal of -117 dBc/Hz at 10 kHz offset. Device delivers 4±3 dBm output power into 50 Ω load while operating off 5 Vdc supply and drawing 25 mA of current. Housed in 0.375 x 0.375 x 0.12 in. standard 375 package, RoHS-compliant VCO operates over extended commercial...

Read More »
Low-Noise VCO suits satellite communications applications.
Oscillators

Low-Noise VCO suits satellite communications applications.

Operating at 6,800 MHz withinÂ- tuning voltage range of 0.5–4.5 Vdc, CRO6800Z-LF comes in 0.86 x 0.63 x 0.22 in. VCO-24H package and features clean spectral signal of -104 dBc/Hz @ 10 kHz offset and typ tuning sensitivity of 18 MHz/V. RoHS-compliant product delivers +5 dBm output power into 50 Ω load while operating off 5 Vdc supply and...

Read More »
Miniature TCXOs consume 2 mA max.
Oscillators

Miniature TCXOs consume 2 mA max.

Housed in 2.0 x 2.5 x 0.8 mm ceramic package, IQXT-260 Series employs analog ASIC for oscillator and high order temperature compensation circuit that provides smooth signal. Digitally compensated devices offer stabilities down to ±0.5 ppm over operating temperature range of -40 to +85°C with clipped sinewave output. Operating from 1.8–3.3 V, series is available in 3 versions: TCXO,...

Read More »
Voltage Controlled Oscillator operates at 3,500 MHz.
Oscillators

Voltage Controlled Oscillator operates at 3,500 MHz.

Along withÂ- control voltage range of 0.3–4.9 V, CVCO55CCQ-3500-3500 features typical phase noise of -115 dBc/Hz @ 10 KHz offset. Output power is +6 dBm typ, input is 5 V typ, and current consumption is 27 mA typ. Supplied in 0.5 x 0.5 in. SMD package, VCO features -12 dBc typ second harmonic suppression as well as respective pulling and pushing minimized to 0.3 and 0.1...

Read More »
Voltage Controlled Oscillator operates at 3,000 MHz.
Oscillators

Voltage Controlled Oscillator operates at 3,000 MHz.

Operating at 3,000 MHz with control voltage range of 0.5~4.5 V, Model CVCO55CC-3000-3000 features typical phase noise of -110 dBc/Hz at 10 KHz offset and delivers output power of +7.0 dBm. Input voltage is 8.0 V, with typical current consumption of 35 mA. Pulling and Pushing are minimized to 1.0 MHz and 0.2 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, VCO is suited for digital radio...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers