PLL Synthesizer optimizes base station performance.
Featuring integrated VCO with output frequency from 3.4–6.8 GHz, Model ADF4355 enables mobile network operators to optimize cellular base station performance and quality of wireless service. Frequency is connected to divide by 1, 2, 4, 8, 16, 32, or 64 circuits, which allows designers to generate RF output frequencies as low as 54 MHz, and allows ADF4355 to cover continuous range from...
Read More »
Fixed Frequency Synthesizer features ultra low phase noise.
Operating at 6,265 MHz with external 100 MHz reference oscillator, Model SFS6265A-LF features typical phase noise of -89 and -90 dBc/Hz atÂ- 1 kHz and 10 kHz offsets, respectively. Device delivers typical output power of +3 dBm while operating off VCO voltage supply of 5 Vdc and drawing 35 mA, and phase locked loop voltage of 3 Vdc while drawing 11 mA. Housed in 0.6 x 0.6 x 0.13 in. PLL-V12N...
Read More »
Voltage-Controlled Oscillator consumes 20 mA of current.
Operating from 1,170–1,270 MHz within tuning range of 0.8–4.2 Vdc, Model SMV1220A-LFÂ- features phase noise performance of -100 dBc/Hz at 10 kHz offset and covers frequency range with average sensitivity of 75 MHz/V and 1.1:1 linearity. Unit delivers 3±3 dBm of output power into 50 Ω while operating over industrial temperature range of -40 to 85°C. Housed in SUB-L...
Read More »
Low-Noise C-Band VCO comes in SUB-L package.
Operating from 4,345–4,355 MHz within 1–4 Vdc tuning voltage range, SMV4350A-LF features phase noise performance of -110 dBc/Hz @ 100 kHz offset and average sensitivity of 50 MHz/V. RoHS-compliant VCO (Voltage-Controlled Oscillator) delivers -0.5 ±2.5 dBm output power into 50 Ω load while operating over -40 to +85°C range. Consuming 20 mA while operating from 5.0 Vdc supply,...
Read More »
NVH Materials Guide
Noise, Vibration, and Harshness (NVH) refers to the study of noise and vibration for the purpose of modifying equipment for quieter, safer operation.
Read More »
L-Band VCO comes in 0.2 x 0.2 x 0.06 in. package.
Supplied in USSP package, USSP1730-LF operates from 1,715–1,745 MHz withinÂ- 1–4 Vdc tuning voltage range. This RoHS-compliant VCO features phase noise of -94 dBc/Hz @ 10 kHz offset while operating off 5 Vdc supply and drawing 19 mA typ. While operating from -40 to 85°C, product provides nominal output power of 3.5 dBm into 50Ω load, suppresses second harmonic to...
Read More »
Low-Jitter Oscillators serve performance-critical applications.
Supplied inÂ- 7 x 5 mm quad flat no-leads module (QFM) package, LMK61xx series includes fully programmable, pin-selectable, and fixed-frequency differential oscillators. Jitter performance of 90 fsec RMS from 12 kHz to 20 MHz helps designers optimize signal integrity and reduce data-transmission errors. Along with LVPECL, LVDS, and HCSL output formats, features include frequencies...
Read More »Master Timing Reference provides accurate synchronization.
Delivering metrology-grade time and frequency performance in configurable 1U rack-mountable package, SyncSystem 4380A employs internal rubidium oscillator and L1/L2 GPS receiver that mitigates effect of ionospheric delay changes and supports advanced GPS processing. Reference offers timing accuracy of
Read More »
Miniature Low Phase Noise OCXO measures 9.7 x 7.5 mm.
Supplied in 4-pad plastic package with fiberglass base, IQOV-71 series comes in standard frequencies of 10, 12.8, 19.2, 20, 24.576, 25, 30.72, 38.88, 40, 49.152, and 50 MHz. Power consumption is
Read More »OCXO Frequency Reference provides 8 buffered outputs.
Featuring 1U, 19 in. rack mount design, 10 MHzÂ- Model MtRF-5021 is suited for use in test and calibration or with multiple phase-locked receivers and transmitters. Device features output level of 0 dBm, temperature range of -40 to +70°C, and standard stability of 50 with 10 or 3 ppb available. Warm up time is less than 3 minutes, with options as low as 15 seconds. Operating...
Read More »
HCMOS VCXO provides -150 dBC/Hz noise floor.
Housed in 9 x 14 mm SMD package, Model CVHD-952 ranges from 131–200 MHz with overall ultra-low phase noise that translates to typical phase jitter of 0.5 psec (12 kHz to 80 MHz). Device requires input supply voltage of 3.3 Vdc and consumes 25 mA of current. Available with extended operating temperature range of -40 to +85°C, voltage controlled crystal oscillator is suited for HD video...
Read More »
DoorKing's 1601 Lane Barrier Provides a Higher Level of Traffic Control for Less
DoorKing is proud to introduce an easy add-on to its 1601 Barrier Gate Operator: The 1601 Traffic Lane Barrier. The barrier gate provides greater traffic control while eliminating the need for bollards or crash beams. Check out this video to learn more.
Read More »
