Low-Noise VCO is suited for satellite communication equipment.
Operating at 1,445–1,820 MHz withÂ- 2–25 Vdc tuning voltage range, CLV1625B-LF features spectrally clean signal of -105 dBc/Hz @ 10 kHz offset and typ tuning sensitivity of 23 MHz/V. RoHS-compliant VCO delivers 0.5 ±2.5 dBm of output power into 50 Ω load while operating off 5 Vdc supply and drawing 25 mA typ. Operating range is -40 to +85°C,...
Read More »
Voltage Controlled Oscillator operates from 900-940 MHz.
Along with control voltage range of 0.2–2.0 V, CVCO33CL-0900-0940 features typical phase noise of -104 dBc/Hz @ 10KHz offset and typical output power of +3 dBm. SMD package measures 0.3 x 0.3 in., input voltage is 3 V, and max current consumption is 20 mA. While pulling and pushing are respectively minimized to 8.0 MHz and 1.0 MHz/V, second harmonic suppression is -10 dBc max. Suitable uses...
Read More »Miniature VCXOs range from 40-170 MHz.
Packaged in 3.2 x 2.5 mm 6-pad ceramic package with hermetically sealed metal lid to reduce EMI radiation, Model IQXV-80 offers LVPECL output while Model IQXV-81 offers LVDS. Both operate from 3.3 V power source and are available with stabilities of ±25 ppm or ±50 ppm over operating temperature range of -40 to 85°C. In either case, frequency can be adjusted externally by...
Read More »
Voltage Controlled Oscillator features ultra-low phase noise.
Covering 3,600–3,700 MHz within tuning voltage range of 0.5–4.5 Vdc, Model CRO3650B-LF features spectrally clean signal of -101 dBc/Hz at 10 kHz offset and typical tuning sensitivity of 60 MHz/V. Oscillator delivers 3+3 dBm of output power into 50 Ω load while operating off 5 Vdc supply and drawing 26 mA of current. Housed in 0.5 x 0.5 x 0.22 in. MINI-16-SM package, device operates over...
Read More »
Custom Presentation Kits - Elevating ideas from conception to creation!
To find out more about how you can get a custom presentation kit tailored to your exact needs, download this whitepaper now.
Read More »
Voltage Controlled Oscillator offers optimized phase noise.
Operating at 1,000 MHz within tuning voltage range of 1.5–3.5 Vdc, Model ZRO1000A-LF features clean spectral signal of -129 dBc/Hz at 10 kHz offset and typical tuning sensitivity of 2 MHz/V. Device delivers +7 dBm of output power into 50 Ω load while operating off 8 Vdc supply and drawing 25 mA. Housed in ZMX-14-SM package measuring 0.75 x 0.75 x 0.22 in., RoHS-compliant VCO operates from -40...
Read More »
Oven Controlled Crystal Oscillator incorporates GPS receiver.
Housed in 14-pin 60 mmÂ-² package, IQCM-110 Series incorporates internal GPS receiver with 1 PPS output. When coupled to external aerial via SMA connector, in event of loss of GPS signal, 10 MHz OCXO will switch-in with holdover capability of 1.5 µs for 24-hour period, maintaining lock until restoration of reference signal. Internal alarm indicates lock failure and subsequent...
Read More »
Voltage Controlled Oscillator operates from 850-1,050 MHz.
Housed in 0.5 x 0.5 x 0.22 in. MINI-14S package, Model V590ME09-LF features spectrally clean signal of -100 dBc/Hz at 10 kHz offset while operating off 5 Vdc supply and drawing 15 mA of current. Unit offers 0.5–5.0 V tuning voltage, delivers +5.5 dBm of output power into 50 Ω load, and covers frequency band with average tuning gain of 63 MHz/V. Operating over extended commercial temperature...
Read More »
Voltage Controlled Oscillator operates from 4,124-4,238 MHz.
Operating with control voltage range of 0.1–16 V, CVCO55CC-4124-4238 features typ phase noise of -106 dBc/Hz @ 10 KHz offset and output power of +5 dBm typ. Input voltage is 8 V, with max current consumption of 30 mA, and pulling and pushing are respectively minimized to 2.5 MHz and 1 MHz/V. Second harmonic suppression is -20 dBc typ. Supplied in 0.5 x 0.5 in. SMD package, VCO suits digital...
Read More »
Dielectric Resonator Oscillator suits radar systems.
Designed to cover 11,000 MHz while incorporating both electrical and mechanical elements for fine and coarse tuning, Model DRO11000A provides low phase noise of -104 dBc/Hz at 10 kHz offset. Voltage controlled oscillator delivers typical output power of +2 dBm into 50 Ω load. Housed in 0.91 x 0.91 x 0.51 in. surface mount SDRO package, device operates off 5 Vdc supply while drawing 23 mA of...
Read More »Keysight Technologies Demonstrates Simulation, Debug, Validation and Test Solutions at MemCon
Showing Greater Than 3.1 Gb/s Simultaneous State Capture of all DDR4 DIMM Address, Command and Data Signals SANTA ROSA, Calif. Keysight Technologies, Inc. today announced it will demonstrate solutions that provide simulation, debug, validation and test for the fastest speed memory designs at MemCon (www.memcon.com), Santa Clara Convention Center, Booth102, Santa Clara, Calif., Oct. 15. Keysight...
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
