Oscillators

New T1254 Series Crystal Oscillator is Designed for Low Orbit Satellite Applications
Oscillators

New T1254 Series Crystal Oscillator is Designed for Low Orbit Satellite Applications

Greenray’s T1254 Series Temperature Compensated Crystal Oscillator is available from 10 to 50 MHz in 20.3mm x 12.7mm DIP package. Unit features an acceleration sensitivity of less than 7x10^-10/g and provides CMOS output. The oscillator can be operated in -40 to +105°C and is stored in -65 to +125°C temperature. Unit meets vibration (MIL-STD-883, Meth 207, Cond A) and shock (MIL-STD-883, Meth...

Read More »
QuikXO HC_JF Series Crystal Oscillators offer maximum phase jitter 150 fs.
Oscillators

QuikXO HC_JF Series Crystal Oscillators offer maximum phase jitter 150 fs.

Saelig’s QuikXO HC_JF Series Crystal Oscillators are offered in CMOS, CML, HCSL, LVPECL or LVDS versions with choice of 1.8, 2.5 or 3.3 V. Units provide frequency stability specifications of ±25, ±50 and ±100ppm with frequency selection timing is specified at 2.5 ms maximum. Oscillators come in 8-pad, 7 x 5mm surface mount packages and features start-up time of 5ms typical. These units are...

Read More »
Gunn Diode Oscillators feature self-locking tuning screws.
Oscillators

Gunn Diode Oscillators feature self-locking tuning screws.

Gunn Diode Oscillators are available in PEWGN1001 (K-band) and PEWGN1000 (Ka-band) models. Units offer a phase noise as low as -98 dBc/Hz typical at 100 KHz offset and a frequency stability as low as -0.2 MHz/°C maximum. PEWGN1001 and PEWGN1000 generate center frequency of 24.125 GHz and 35 GHz respectively. Oscillators are operated in -40°C to +85°C temperature range with +5 to +5.5 Vdc bias...

Read More »
Phase Locked Oscillators feature TTL lock detect output.
Oscillators

Phase Locked Oscillators feature TTL lock detect output.

Pasternack’s Phase Locked Oscillators are offered in 50, 100, 500, 1000, 2000, 4000 and 6000 MHz frequencies. Used as phase locked loops, frequency synthesizers, function generators and local oscillator, units are compliant to RoHS standards. Operated in -30°C to +70°C temperature range with single positive DC voltage supply, oscillators offer a phase noise of -105 dBc/Hz at 10 KHz offset and...

Read More »
I2C-Programmable Crystal Oscillators are suitable for 56 Gbps transceiver designs.
Oscillators

I2C-Programmable Crystal Oscillators are suitable for 56 Gbps transceiver designs.

Si544/Si549 Ultra Series™ I2C-Programmable Crystal Oscillators are offered in 3.2 mm x 5 mm and 5 x 7 mm packages. Units offer jitter performance below 95 femtoseconds and are suitable for 100/200/400G communications and data center applications. Products provide frequency from 200 kHz to 1.5 GHz and can be powered using single 1.8, 2.5 or 3.3 V supply. These oscillators use low-jitter...

Read More »
T752 Series Temperature Compensated Crystal Oscillator comes in 5 x 7mm package.
Oscillators

T752 Series Temperature Compensated Crystal Oscillator comes in 5 x 7mm package.

T752 Series Temperature Compensated Crystal Oscillator is available in from 9 to 52MHz with CMOS or clipped SINE output. Unit is offered with +3.3 or +5.0VDC supply and is suitable for mobile communications, instrumentation, GNSS, SATCOM, GPS and missile guidance applications. Product offers s temperature stability down to ±0.5ppm and acceleration sensitivity down to less than or equal to 0.2 x...

Read More »
Temperature Compensated Oscillator delivers phase noise up to -165dBc/Hz.
Oscillators

Temperature Compensated Oscillator delivers phase noise up to -165dBc/Hz.

T1266 Temperature Compensated Oscillator is available from 50MHz to 125MHz with sinewave output which can drive a load of 50Ω. Unit is operated in a temperature range of -55 to +95°C and is housed in a 17.3mm square package. Featuring +3.3 or +5.0VDC supply, product is suitable for PLL, up-conversion apps, mobile communications and instrumentation applications. Oscillator provides temp...

Read More »
Fairview's Voltage-Controlled Oscillators are RoHS and REACH compliant.
Oscillators

Fairview's Voltage-Controlled Oscillators are RoHS and REACH compliant.

Fairview’s Voltage-Controlled Oscillators are offered in 16 models in 10 MHz to 4350 MHz band range. Units are used in military electronics, SATCOM, wireless communication, test and measurements and are housed in 0.5 in. hermetically sealed surface mount package. VCOs offer tuning voltages ranging from 0.5 V to 20 V and deliver an output power from +4dBm to +12dBm with supply voltage of 5Vdc...

Read More »
MEMS Reference Clocks provide 300 msec maximum startup time.
Oscillators

MEMS Reference Clocks provide 300 msec maximum startup time.

Designed for driving MCUs and analog front end modules, MEMS Reference Clocks are available in SiT1569 Oscillator and SiT1576 Super-TCXO models. Housed in 1.5 mm x 0.8 mm package with 0.60 mm height, units are operated in -40 to +85°C temperature range. SiT1569 features frequency range of 1 Hz to 2 MHz and power supply current of 2.5 µA whereas SiT1569 provides 1 Hz to 462 kHz and 5.5 µA...

Read More »
Reference Oscillators meet MIL-STD-202 standards.
Oscillators

Reference Oscillators meet MIL-STD-202 standards.

Available in SMA connectorized with DC bias pins or true surface mount packages, Free-Running Reference Oscillators come with single output frequencies of 10 MHz, 50 MHz or 100MHz. Offering frequency output stability level of ± 5 ppm, output power level of +7 dBm and phase noise below -150 dBc/Hz at 10 KHz, units operate from -30°C to +70°C temperature range. Products are suitable for phase...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers