Future Electronics Announces Global Agreement with Pericom
Montreal, Canada – Future Electronics, a global leading distributor of electronic components founded in Montreal, Quebec, CanadaÂ- in 1968 by Robert Miller, is pleased to announce the completion of a contract to sell Pericom products worldwide, following the recent acquisition of Pericom Semiconductor by Diodes Incorporated. Under the terms of this new agreement, Future Electronics is...
Read More »
Bliley Technologies Introduces the World's Lowest Power OCXO
Erie, PA – Bliley Technologies, leader in high performance frequency control devices, today announced the world's lowest power ovenized oscillator, the LP102 OCXO. Offering exceptional stability and phase noise performance in a product that consumes only 135mW, the LP102 represents a major innovation in the frequency control industry. The goal with our LP102 product line was to offer the...
Read More »Programmable Oscillators enhance embedded system performance.
Offered in 5 x 7 mm LCC, 5 xÂ- 3.2 mm LCC, and 16-pin QFN packages, CY294X oscillators deliver performance that exceeds reference clock requirements of such high-speed interface standards as 40/100GbE, SyncE, and IEEE 1588. I²C interface enables on-board programming, and programmable clock technology is leveraged to instantly generate any frequency from 15 MHz to 2.1 GHz. RMS jitter...
Read More »Compact Stable 32 kHz TCXO offer in-system auto-calibration.
Available inÂ- 1.5 x 0.8 x 0.6 mm CSP, SiT156x/7x series perform several functions – RTC reference, connectivity sleep clock, audio subsystem reference – in wearable, IoT, or mobile systems. All products utilize TempFlat MEMS™ technology and deliver ±5 ppm all-inclusive frequency stability, and SiT1568 also offers in-system, auto-calibration feature. Along with...
Read More »
6 Engineering & High-Performance Plastics Used for Machined Components
This resource breaks down six of the most commonly used high-performance plastics, properties and common applications, and questions to ask during material selection.
Read More »
Wideband RF Phase-locked Loops feature integrated VCOs.
Available in 40-pin, 6 x 6 mm QFN package, Models LMX2582 and LMX2592 support output frequencies up to 5.5 GHz and 9.8 GHz, respectively.Â- Devices provide 1.8 GHz carrier open-loop VCO phase noise of -144.5 dBc/Hz at 1 MHz offset. Featuring normalized PLL noise floor at -231 dBc/Hz and phase-detector frequency of 400 MHz, products enable very low integrated noise of 47 fs RMS...
Read More »
High Linearity Mixer enables design flexibility.
Featuring integrated local oscillator buffer with bypass mode, UltraCMOS® PE4152 is suited for land-mobile-radio, tactical radio, and cellular infrastructure applications. Quad MOSFET mixer operates from 100–1,000 MHz (RF) and 200–900 MHz (LO). When using LO buffer, linearity is 25 dBm IIP3 and isolation is 30/30 dB LO-RF/IF.Â- In LO bypass mode, linearity is 24 dBm IIP3, and...
Read More »Compact OCXO offers ultra-low phase noise performance.
Available from 10–120 MHz with +10 dBm sinewave output, YH1485 OCXO (oven controlled crystal oscillator)Â- features low phase noise down to -180 dBc/Hz. Acceleration sensitivity is available down to
Read More »
Temperature Compensated Oscillator offers low g-sensitivity.
Available from 50–100 MHz with squarewave, CMOS output, Model T1241 features low g-sensitivity down to < 7 x 10-11/g and typical phase noise of -155 dBc/Hz at 10 kHz. Supply voltage is +3.3 or +5.0 Vdc and supply current is 30 mA max. Supplied in rugged SMT package, TCXO includes vibration compensation andÂ- electronic frequency control for precise tuning or phase locking applications....
Read More »Phase Locked Oscillator supports satellite communications.
Phase locked at 3,450 MHz to external 10 MHz reference oscillator, SFS3450C Fixed Frequency Synthesizer features typical phase noise ofÂ- -91 and -104 dBc/Hz at 1kHz and 10kHz offsets, respectively. Pre-programmed S-band device delivers typical output power of +2 dBm while operating off VCO voltage supply of 5 Vdc and drawing 25 mA. Housed in 0.6 x 0.6 x 0.22 in. PLL-V12C...
Read More »
Voltage Controlled Oscillators cover 10 MHz to 11 GHz range.
Available in true surface mount and coaxial packaged versions, High Reliability VCOs cover select bands from 10 MHz to 11 GHz. Frequency of output signal can be varied by adjusting amplitude of input tuning voltage. Units feature tuning voltages from 0–20 V, output power from 0 to +12.5 dBm, and phase noise performance as low as -125 dBc/Hz at 10 KHz offset. Operating from -40 to +85°C,...
Read More »
How SpinSelect Can Save You Time and Money
Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.
Read More »
