New Oscillators Products

Spread Spectrum Clock synchronizes 8 switching regulators.

Offered in MS16 Package, LTC6909 reduces peak radiated EMI and promotes control (enable/disable/phase-synchronize) of switching regulators in multiphase power supplies. Precision silicon oscillator has 8 separate outputs, providing up to 8 rail-to-rail 50% duty cycle clock signals. Using 3 logic inputs, output phase relationship can be configured from 45-120Ã-

VCO operates from 2,400-2,569 MHz.

Offering control voltage range of 0.5-4.5 V, CVCO55CC-2400-2569 VCO features typical phase noise of -102 dBc/Hz at 10 kHz offset. Output power is typically +4 dBm and input voltage is 5 V, with maximum current consumption of 35 mA. Pulling and pushing are minimized to 2.5 MHz and 1.5 MHz/V, respectively, while unit has second harmonic suppression of -15 dBc typical. It is contained in 0.5 x 0.5...

L-Band VCO suits fixed wireless and test/measurement jobs.

Operating at 1,560 MHz with tuning voltage from 0-5 Vdc, ZRO1560A1LF features typical phase noise of -121 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 0.7 MHz/V. RoHS-compliant VCO delivers typical output power of 0 dBm at 5 Vdc supply while drawing 18 mA (typ) over -40 to +85Ã-ºC range. Supplied in 0.5 x 0.5 x 0.22 in. MINI-16 package, product offers typical second harmonic...

Ruggedized, SMT TCXO suits aerospace/defense industries.

Supplied in 7 x 9 mm surface-mount (SMT) package, TX-600 temperature controlled crystal oscillator (TCXO) meets timing specifications required by radio, GPS telemetry, and Stratum 3 applications over full range of military specified environmental conditions. RoHS-compliant product utilizes discrete oscillator circuit, optimizing phase noise performance and enabling operation up to 100 MHz, and...

A Reference Guide To Frequency Conversion Power Supplies For Industrial Applications

The purpose of this guide is to assist contractors and purchasing agents charged with writing specifications for, and/or procuring, frequency converters.

C-Band VCO suits satellite, microwave radio applications.

Operating from 4,030-4,070 MHz with tuning voltage from 0-5 Vdc, SMV4051A-LF features typical phase noise of -83 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 55 MHz/V. RoHS-compliant VCO delivers typical output power of 2.25 dBm at 5 Vdc supply while drawing 18 mA (typ) over -10 to +70Ã-

UHF Band VCO features ultra low phase noise.

Operating from 390-430 MHz, Model CRO0410A-LF features tuning voltage range of 0.5-4.5 Vdc, typical phase noise of -117 dBc/Hz at 10 KHz offset, and typical tuning sensitivity of 17 MHz/V. Device delivers typical output power of -4 dBm at 5 Vdc supply while drawing 36 mA over temperature range of -30 to 70Ã-

Oscillators offer low current consumption at all frequencies.

Available in 2.5 x 2 mm package, 1 V F200 Series oscillators feature standby function that reduces current consumption to 5 Ã-µA. Current draw is 2.5 mA across 1.8-32 MHz frequency range and 3.5 mA from 32.1-50.0 MHz. Stabilities range from Ã-

UHF Band VCO are designed for low phase noise.

Operating from 390-430 MHz with tuning voltage range of 0.5-4.5 Vdc, CRO0410A-LF features typical phase noise of -117 dBc/Hz @ 10 kHz offset and typical tuning sensitivity of 17 MHz/V. RoHS-compliant VCO is designed to deliver typical output power of -4 dBm at 5 Vdc supply while drawing 36 mA (typ) over -30 to 70Ã-

Clock Oscillator operates from 1.62-3.63 V supply.

Model PL610-61 is fixed version clock oscillator that accepts sine wave or square wave inputs with less than 0.1 V voltage swing. It includes crystal or reference clock flexible input and 6-bit odd/even frequency divider that produces outputs from 80 kHz to 130 MHz with 50% duty cycle. Performance is regulated by built-in Automatic Level Control circuitry and units can produce 2 clock outputs of...

Voltage Controlled Oscillator operates from 2,480-2,960 MHz.

With control voltage range of 0.5-18 V, CVCO55CC-2480-2960 features typical phase noise of -106 dBc/Hz at 10 kHz offset and +7 dBm of output power. Available in 0.5 x 0.5 in. SMD package, it consumes 35 mA from input voltage of 8 V, and has second harmonic suppression at -15 dBc typ. Pulling and pushing are minimized to 1.5 MHz and 0.5 MHz/V, respectively. Suitable applications include digital...

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.