New Optics & Photonics Products

Connectors are suited for packaging machinery.

Virtually indestructible 5F&J solenoid valve connectors come with molded-in screws and gaskets and are available in ISO, Mini, 8 mm, and 9.4 mm sizes. Options include straight or right angle wire orientation, lighted and surge suppressed, as well as standard or custom wire lengths. Round connectors, 8 and 12 mm sizes, offer 3-5 pin configurations and come in molded or field-wire versions.

Diode Laser Bar features sealed package and high power.

DuraLite(TM) offers 810 nm, 50 W bar housed in environmentally sealed and lensed conduction-cooled package, suitable for integration into graphic arts and direct-diode materials processing applications. Device features several die attach enhancements and typical drive current and compliance voltage for device is

Laser Microscope provides sub-micron imaging.

Featuring 408 nm laser, LEXT Confocal Laser Scanning Microscope offers 120-14,400 x magnification power, 0.12 mm resolution, and 3D measurement capability. Unit simultaneously images samples in 3D and true color by combining acquired laser 3D image with full color brightfield image in system computer. Samples can be placed directly onto LEXT stage and imaged without preparation or sample...

Trunk Cable System suit data center environment.

OptiMoÃ-® Pre-Terminated Fiber Optic Trunk Cable System supports 10 Gigabit Fibre Channel and 10 Gigabit Ethernet. Pre-terminated connectors eliminate field-termination time, while optional pre-installed pulling grips simplify cable pulling process. Deployment packaging offers access to all terminations and facilitates confirmation testing prior to installation. Cable breakout design aids...

Process Piping: Everything You Need & Should Know

Learn how process piping differs from other systems, key considerations, and how it's applied in different systems.

Closed-Door Inspection System maintains safety barrier.

SpyGlass(TM) fish-eye lens and Viewport pinpoint hotspots in electrical cabinets while circuits are energized and under load. UL-rated Viewport, suited for low- and high-voltage applications from 480 V and up, uses 0.5 in. aperture and can be installed in vertical or horizontal position. With focus range of 4-45 in., lens has 53Ã-

Fiber Laser generates eye-safe short pulses.

Based on erbium-doped fiber technology, Model PF1550-30 delivers 1.54 Ã-µm light output via single-mode fiber. It generates nominal 1 ns pulses at repetition rates between 100 kHz and 1 MHz. Producing 1 W of peak power at 1 MHz, unit is suited for laser range finding, range imaging LIDAR, fiber optic sensing, and communications. Diffraction-limited output also makes it suited for...

Alignment System checks fabrication equipment.

Microgage Flatness Checking Kit monitors flat moving surfaces, precision machine slides, X-Y stage travel, and robot positioning accuracy. Laser transmitter is mounted on precision base that can swing laser reference beam through flat plane. Digital receiver is placed on surface to be measured, and hand-held display provides reading of height of surface relative to laser beam to 0.0001 in. It can...

Signal Conditioners and Electronics support TEDS Sensors.

Rack mountable TEDS (Transducer Electronic Data Sheet) multi-channel and dual-mode signal conditioners are available for use with ICPÃ-® and charge output vibration, pressure, and force sensors. In-Line Charge Converters are available with TEDS capabilities, which enable the devices to store and recall TEDS data for attached sensor. In-Line TEDS Adaptor features interface chip that allows...

Rifle Scope offers fully multi-coated optics.

Eraticator 8.5-25x50AO Scope features reticle design with micro-fine cross hair and illuminated 1/16 mm red dot. When illuminated, dot has 11 different brightness intensity settings for accurate shot placement. Dot is black when not illuminated, providing continuous aim point. Scope includes fast focus eyepiece, finger target style turrets with click stops, and fine tune 1/8 moa adjustments. With...

Magnifiers offer 4x and 5x magnifying powers.

Stand-mounted, Goose Neck Magnifiers feature bi-convex coated glass lenses to provide sharpness over entire field of view and prevent image distortion. Flexible mounting arm enables lenses to be accurately positioned, leaving both hands free to manipulate viewed work piece. Units are all-metal with 2.25 or 4 in. diameter lenses.

Industry Leading OEM with over 65 Years of Experience

Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.