New Optics & Photonics Products

Video Filter/Drivers help minimize design and test time.

Lead-free Models FMS6143, FMS6145, and FMS6146 are 3, 5, and 6 channel, 4th order filter/drivers that eliminate need for multiple discrete components. By providing 8 MHz cut-off frequency and 48 dB stopband attenuation, devices meet standard definition video requirements. Internal diode clamps and bias circuitry enable units to accommodate ac- or dc-coupled input signals. Outputs on each device...

Camera combines 1600 x 1200 resolution and color imaging.

Measuring 40 x 50 x 120 mm, CV-M8CL 2-megapixel color camera is based on progressive scan 1 in. format Bayer CFA CCD sensor with 7.4 Ã-µm square pixels. It incorporates Camera Link and RS-232C interfaces, PIV mode, and C-mount. Additional features include auto iris lens video output, knee and gamma response curves, and analog monitor output. Unit operates at 30 or 17 frames/sec at full...

Laser Kit solves machinery alignment problems.

Laser Microgage Kit includes 90-Line laser squaring attachment for checking machine beds, vertical cutting machinery, roll parallelism, and geometric parameters. Laser beam enters 90-Line through port in front and exits out side port at 90Ã-

Wall Mirror offers softly diffused non-glare lighting.

Eclipse is characterized by convex, polished-spun, metal reflector, finished in white, with round mirror floating in center. Light is reflected off curved reflector, onto face peering at mirror, providing effect of total solar eclipse. Illumination is provided by 3 medium-base incandescent lamps controlled via wall switch. Eclipse uses all solid brass components with polished or brushed brass,...

Metal Finishing Selection Guide

This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.

Color CCD Camera features 16:9 pixel aspect ratio.

Available in Camera Link and LVDS versions, AccuPiXEL TMC-2016-8 is a 2.1 megapixel camera with 1 in. progressive scan CCD, Kodak KAI-2093M imager, and Bayer color filter array. It offers 1,920 x 1,080 resolution and includes 8-bit digital or optional 10-bit linear output. Model TMC-2016-8 features full asynchronous reset with electronic shutter up to 1/10,000 sec or pulse-width exposure control,...

CD-SEM is suited for critical dimension metrology.

With measurement throughput up to 1,000 sites/hr, Yosemite SP-1000 CD-SEM (Critical Dimension Scanning Electron Microscope) features clear imaging at bottom of 30:1 aspect ratio contact holes. System retains 3D model-based critical shape metrology required at and below 65 nm for accurate representation of physical shape of features. Unit uses landing energies as low as 100 eV. Product is suited...

Cover Strip protects linear guides from contamination.

Made from stainless steel, BAC Cover Strip for MONORAIL BM provides alternative to plastic caps that cover counterbored mounting holes in profile rail of linear guideway assembly. Measuring .5 mm thick, strip is placed on top of rail and snapped into full-length groove along where holes are drilled. Since width of cover strip is narrower than width of guide rail, exposed surface on top of rail...

Pulsed Fiber Lasers suit micromachining applications.

Operating in the eye-safe region near 1.54 microns, Model PF1550-36 measures 12 x 13 x 3.5 in. and can be rack-mounted or used on bench-top. Fully contained laser has all-fiber design, and power levels can be remote-controlled with PC via RS-485 port. Unit generates diffraction-limited, 3-5 ns pulses at repetition rates between 20 kHz and 1 MHz. It produces 4 W of average power at repetition...

CO2 Laser Cutting Systems target heavy plate fabrication.

Able to accommodate up to 16 sheets of 3 x 1.5 m material, Impuls 6530, 8030, and 12530 let user load/unload one table while machine processes parts on another. Systems, able to process flat plate up to 25 mm mild steel, 15 mm aluminum, and 20 mm stainless steel, provide programmable Z-axis with travel up to 280 mm. Impuls 6530 handles workpieces to 256 x 120 in, 8030 accommodates sheets to 315 x...

Excimer Lasers provide beam homogeneity.

Offering pulse-to-pulse stability, COMPexPro(TM) UV lasers are offered with fluorine gas or chlorine gas plasma tubes. Ceramic preionization discharge results in smooth beam profile and stable pulse energies while also preventing build-up of tube contaminants. Lasers deliver energies up to 700 mJ for 248 nm and pulse repetition rates from single-shot up to 100 Hz, and are intended for scientific,...

Acoustic and Thermal Solutions for Original Equipment Manufacturers

Technicon's products solve the most complex noise pollution and thermal problems and improve product marketability. Check out the video to learn more.