New Materials Products

Microprocessor IP Core targets portable applications.

Featuring RISC architecture, Model XAP4 has both 16-bit data and address buses and is capable of running programs up to 64 kbytes. On 0.18 micron CMOS fabrication process, unit can deliver up to 63 Dhrystone MIPS at clock frequency of 117 MHz. SIF debug logic provides full control over processor and access to debug registers, together with non-invasive access to any part of processor's memory map...

Port Multiplier connects multiple drives to one controller.

Providing 3 Gbps throughput for various applications, 5x1 eSATA Port Multiplier (PM) allows multiple drives to be connected to SATA controller via one eSATA port. It fits inside Addonics Storage Tower and any SCSI enclosure with 2 or more bays and 50-pin Centronic SCSI connector on backplane. Each of 5 drives can be set up as individual drives, RAID, or JBOD (just a bunch of disks), and all...

Computer Evaluation Kit offers wide range of interfaces.

Evaluation kit for development and testing of fanless miniature computers is based on business card-sized computer-on-module X board equipped with XscaleÃ-®-based IntelÃ-® 80219 processor. It features 3 USB, 1 LAN, 2 serial UART, and 2 PCI interfaces; AC97-Sound; slot for CompactFlash card; and SODIMM slot. With pre-installed WindowsÃ-® CE OS, X board has 128 MB on-board DRAM and up...

Hot Melt offers non-sagging alternative to tape glazing.

Able to squeeze down during application for increased contact surface, InstantGlazeÃ-® II facilitates application and installation of glass for residential and small commercial window and door manufacturers. Soft texture promotes elasticity and elastic recovery performance. Product features 24 hr pot life and up to 15 min of open time, develops instant green strength, and bonds to vinyl,...

How to Select a Rubber Compounding & Mixing Supplier

To learn more about rubber compounding and mixing, and how experienced manufacturers like AirBoss can meet your needs, download this whitepaper now.

Aluminum Alloy Substrate is thermally conductive.

Providing thermal conductivity to polymer-based insulated metal substrates, Anotherm(TM) is insulated by chemically grown, anodized dielectric layer with solderable screen printed conductors. It eliminates need for additional heatsinks and features uniform thickness of 35 microns, with no potential for delamination or peeling. Max operating voltage is 250 Vac, with thermal impedance at 0.2Ã-

Evaluation Board enables individual pixel control.

Using ATMEGA16 microcontroller and 4 Mbit AT45DB041B Flash, Model TC51854 provides full support for Optrex F-51854 160 x 128 F-STN monochrome graphic transflective LCD with 4.7 in. diagonal viewing area for characters and/or graphics display. Independent pixel control allows user to display text and pictures simultaneously. Board includes RS-232 interface with 9 programmable baud rates, touch...

Polyacetal Compounds provide ESD protection.

With conductivity less than 1 x 105, PRE-ELEC 12-000 conductive compounds are based on copolymer polyacetal with carbon black or carbon fiber additive, while PRE-ELEC 12-031 compounds can be colored without affecting electrical properties. Ranging from 1 x 109 to 1 x 1011 Ã-§ÃÆ'Ã¢â-¢, PRE-ELEC ESD 12-000 static dissipative compounds are colorable alloys of copolymer polyacetal and...

TPE Alloys suit molding or coextruding applications.

Featuring 20 to 90 Shore A hardness range, Softlink 900 Series TPEs allow lowering of friction coefficient to improve abrasion resistance. Off-white or easy-to-color compounds can be processed without preheating or drying and offer matte finish. Used in 2-shot molding, compounds can substitute for silicone, latex, or rubber in power tools, hand tools, appliances, and consumer products.

Modular Cable System comes in PVC or plenum versions.

Consisting of 2 Runners(TM) and selection of 8 BreakAway(TM) termination jumpers, RapidRun(TM) can handle UXGA, RGBHV, component, composite, and S-video along with left and right audio or S/PDIF digital audio signals in runs from 15-150 ft. Connector system allows Runner base cable to be pulled through Ã-¾ in. conduit with up to 90Ã-

Welding Electrodes are nickel-based.

Part of nickel-iron alloy group, self-shielded SelectWear 55NI is intended for buildup, joining, and repair of cast iron components as well as welding of cast iron to dissimilar metals. With hardness maintained to 1,200Ã-

Increase Workplace Safety, Manage Heavy Loads with Equipment from A-Plus Warehouse

A-Plus Warehouse carries a wide selection of commercial and industrial material handling equipment at affordable prices. Check out the video to learn more.