Epoxies

Epoxy Adhesive fixes electrical coils.
Epoxies

Epoxy Adhesive fixes electrical coils.

Tra-Bond CA20 thixotropic epoxy adhesive system is formulated for shorted turns, damaged end wire extensions, or other coil repair applications where high-fill, non-sag adhesive is needed. It provides high dielectric isolation and good mechanical strength. Readily mixed, handled, used, and cured at room temperature, Tra-Bond CA20 develops strong bonds to materials such as metals, glass, ceramics,...

Read More »
Epoxies

Adhesive Epoxies come in pre-formulated cartridges.

Epox-Eez(TM) twin pack cartridges are pre-filled, measured and mixed. Adhesive will cure at room temperature, provide 500°F service, and have chemical, electrical and moisture resistance. Epox-Eez cartridges are available for company's General Purpose 4525N, Low Viscosity 4461N, Vibration Resistant 4535N, Fast Set 4537N, Ultra Flexible 4538N, and Machinable Epoxy 4540N high-temperature...

Read More »
Epoxies

Epoxy Board is designed for use at temperatures to 250°F.

Ren Shape 5008 epoxy board can be machined with carbide cutters to generate molds with good edge definition, dimensional stability, and smooth surface finish. It can be used to produce intermediate-temperature models, heat-resistant thermoform tooling, and lay-up tools for composite parts. Molds may be produced for thermoforming detailed, production-quality parts from polypropylene, polystyrene,...

Read More »
Epoxy Casting Compound meets UL fire retardant specs.
Epoxies

Epoxy Casting Compound meets UL fire retardant specs.

TRA-CAST 3143 has low viscosity, long pot life, and is certified to UL 94 V-O. Epoxy system has low coefficient of thermal expansion and excellent wetting and adhesion to most electronic and aerospace-industry materials, including metals, glass products, ceramics, industrial laminates and many rigid plastics. Applications include rigid potting, laminating, transformer encapsulating, filament...

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Epoxies

Epoxy emits no VOCs.

Two component EMCAST 758 thermally conductive epoxy has moderate viscosity of 130,000 cp, glass transition temperature of 125°C, thermal conductivity of 3 W/mK, and is not electrically conductive. It is 100% solids epoxy with no solvent for zero VOCs. Epoxy is available in pre-mixed and frozen syringes or in two component kits with mix ratio of 2:1. Substrates include aluminum, stainless...

Read More »
Epoxies

Thermally Conductive Epoxy cures at room temperature.

Two component EMCAST has viscosity of 130,000 cps, specific gravity of 1.90, and glass transition temperature of 125Â-ºC. Its thermal conductivity is 3 W/mK, and it is not electrically conductive. 100% solids epoxy has no solvent for zero VOCs. Epoxy cures in 8 hours @ 25°C, 1 hour @ 65°C, and 15 minutes @ 100°C. It is available as pre-mixed and frozen syringes or in two...

Read More »
Epoxy Adhesive has low vapor pressure.
Epoxies

Epoxy Adhesive has low vapor pressure.

Two-part Tra-Bond 2116 thixotropic adhesive can be used in electronic and industrial applications where high-fill, non-sag adhesive is needed. It bonds well to many substrates including metals, glass, ceramics, wood, and plastics. Adhesive cures at room temperature, is electrical insulator, and is NASA outgassing approved. It resists chemicals and weather.

Read More »
Liquid Epoxy Encapsulant provides fast capillary flow.
Encapsulants

Liquid Epoxy Encapsulant provides fast capillary flow.

Hysol® FP4549FC package level underfill is designed to offer excellent adhesion to flip-chip assemblies containing no-clean flux residues. Qualified to perform in 260°C reflow applications, FP4549FC heat cures in 30 minutes at 165°C, and meets JEDEC Level-3 260°C requirements. This high-purity, low-stress liquid epoxy encapsulant is designed for use in fine pitch...

Read More »
Epoxies

Epoxy features built-in cure indicator.

CHIPSHIELD 1455HD low-viscosity UV curable epoxy is designed to perform as chip coating both in smart cards and as a protective glob on PC surface-mounted chips. It is cured with long wave UV, 325-380 nm wavelength. Epoxy is light powder blue before cure, and faint rose to amber after cure, indicating cure has been completed. With Tg of 80° C and moisture resistance, chip is assured of...

Read More »
Epoxy Adhesive cures at low temperatures.
Epoxies

Epoxy Adhesive cures at low temperatures.

TRA-BOND 400-5 thixotropic one-part epoxy system is used as a no-sag, non-drip staking and laminating adhesive. It combines properties of moderate working life with ability to cure at temperatures as low as 60° C. Epoxy contains no volatile solvents and features excellent temperature resistance, hardness and strength.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers