Epoxies

Encapsulants

Encapsulating Elastomers offer hydrolytic stability.

Two-component urethane series encapsulants have durometers from 25 to 55 Shore A. Unfilled materials maintain integrity over operating temperature range of -40 deg to 125 deg C. Glass transition temperature of -72 deg C makes them suitable for low temperature potting applications. They offer electrical insulation, thermal cycling stability, chemical resistance, and no shrinkage. Mixed viscosities...

Read More »
Epoxies

Epoxy and Adhesive are approved to military specifications.

ANAEBONd AB202 non-anaerobic adhesive is approved for field repair terminations. Suitable for bonding glass, its packaging allows for terminations in 2-3 minutes without heat. Fully cured material reduces pistoning in adverse environmental conditions. ANGSTROMBONd® AB9112 epoxy, approved to Mil A-24792A for use in OEM fiber optic terminations, will not cause cracking in multimode...

Read More »
Epoxies

Repair Putty works under water.

Nonrusting, epoxy-based Underwater Repair Putty penetrates moisture and forms strong, permanent seal. It eliminates need to dry substrates before beginning repairs, making it suitable for repairing, patching, or rebuilding wet or submerged equipment. Putty bonds securely to steel, iron, aluminum, brass, bronze, concrete, wood, and selected plastics. It cures at temperatures as low as 40 deg F and...

Read More »
Low Viscosity Epoxy suits many applications.
Epoxies

Low Viscosity Epoxy suits many applications.

Clear TRA-BOND 2113 adhesive makes strong bonds to glass, ceramics, metals and plastics, and is resistant to weather, salts, mild acids and alkalis, organics and inorganics. It can be used for bonding, laminating, sealing and small volume potting. Epoxy has good wetting and flowability, low CTE and operating temperature up to 130°C. It cures at room temperature.

Read More »
Epoxies

Aluminum-Filled Epoxies suit HVAC repairs.

FasMetal 10 HVAC Repair paste and Aluminum Putty F cure at room temperature, withstand service temperatures up to 250 deg F, and resist broad range of chemicals. FasMetal 10 bonds to metals, ceramics, wood, concrete, and glass. Aluminum Putty F bonds to metal or concrete and hardens to rigid material that can be ground, drilled, or tapped. Both can be used for repairing aluminum castings,...

Read More »
Epoxies

Epoxy bonds, seals and casts.

Flexible, 2-component EP21TPFL-1 polysulfide elastomer resists fuels, water, and aggressive chemicals. It cures at room temperature, is 100 percent reactive, and does not emit any volatiles during curing. Operating temperature range is -65 to +300 deg F. Thermal- and shock-resistant epoxy is available in 1/2 pint, pint, quart, gallon, and 5 gal kits, and in low and high viscosity versions.

Read More »
Epoxy Adhesive cures in 24 hours.
Epoxies

Epoxy Adhesive cures in 24 hours.

Suitable for bonding and potting applications up to 250°F, HP 250 epoxy adhesive is resistant to heat, chemicals, and impact. With viscosity of 105,000 cps, HP 250 thixotropic paste will not sag or run when used on vertical or inverted surfaces. It cures at room temperature, and produces high-strength, durable, nonshrinking bonds. Working time is 65 minutes, tensile shear strength is 3200...

Read More »
Syntactic Repair Adhesive can be drilled, sawed and shaped.
Epoxies

Syntactic Repair Adhesive can be drilled, sawed and shaped.

TRA-BOND 2125 two-part system is composed of micron-sized glass spheres in epoxy binder. Chemical-resistant adhesive bonds to most surfaces, including metals, building construction products, glass, glass fabrics, and plastics. TRA-BOND 2125 is suitable for use in industrial repair, bonding, and casting applications.

Read More »
Epoxies

Epoxy Adhesive provides semi-rigid bonds.

Tra-Bond 293-1T general purpose epoxy adhesive provides strong bonds to difficult-to-bond substrates, such as gold, nickel, silver, copper and brass. It can be cured at moderate temperatures from 60 to 75°C. Tra-Bond 293-1T thixotropic adhesive is available in pre-measured bipax kits or premixed and frozen syringes.

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers