Epoxies

Epoxy Gel repairs concrete floors.
Repair Kits

Epoxy Gel repairs concrete floors.

Epoxi Gel Patch is a 100% solids epoxy gel for patching cracks, divots, and other minor deformities in concrete floors. Components come in factory-portioned units to eliminate mixing errors. Smooth consistency enables product to be applied with spatula, spackle knife, or flat trowel. Epoxi Gel Patch is suited for use in facilities that limit use of solvents and fine, loose silica.

Read More »
Epoxy Adhesive forms bonds with variety of materials.
Epoxies

Epoxy Adhesive forms bonds with variety of materials.

TRA-BOND 2143D medium viscosity polyamide epoxy adhesive is supplied in 2-part formulation that cures at room temperature or under heat. Able to bond with metals, plastics, glass, ceramics, leather, rubber, and wood, rigid compound exhibits Tg of 65°C, minimal moisture absorbance, and lap shear strength of 2,200 psi. It is suited for applications where impact resistance is required.

Read More »
Clear Liquid Adhesive minimizes shattering.
Coatings

Clear Liquid Adhesive minimizes shattering.

Safety Clear Coat(TM) seals and protects glass, metal, ceramics, wood, phenolics, composites, fabrics, and concrete against impact and wear. Self-leveling, UV-stable product is water-clear, maintains clarity over time, provides tensile elongation of 150%, and has no VOC emissions. Epoxy formulation features mixed viscosity of 3,500 cps, working time of 30-40 min, and functional cure time of 8-10...

Read More »
Epoxies

Flexible Epoxy resists thermal shock and vibration.

Duralco 4538 can be tailored to meet application requirement by varying mix ratio of resin to hardener, resulting in exact degree of flexibility needed. Product cures at room temperature, without odors, to provide thermal and mechanical shock resistance, adhesion to dissimilar substrates, and electrical and chemical resistance. Duralco 4538 will not gum up or soften at elevated temperatures and...

Read More »
Epoxy Adhesive offers electrically insulating properties.
Epoxies

Epoxy Adhesive offers electrically insulating properties.

Thermally conductive, 2-part EP21TDCAOHT bonds dissimilar substrates with different coefficients of expansion and contraction. Adhering to metals, ceramics, glass, rubbers, and plastics, product has 1:1 mix ratio by weight or volume and cures at room temperature or more rapidly at elevated temperatures. Exhibiting thermal and mechanical shock resistance, it has paste viscosity, 35 pli T-peel...

Read More »
Epoxies

Epoxy Adhesive is color-keyed for convenience.

Clear, low-viscosity TRA-BOND F230 offers Shore D hardness of 85, pot life of 1 hour, and can be cured in as little as 1 min at 150°C. Product is suited for termination of single and multi-mode connectors, and bonds to variety of optical materials. Featuring operating temperature of -60 to 175°C, adhesive offers impact and thermal shock resistance. Unmixed components are light yellow,...

Read More »
Silver Conductive Epoxy Adhesive sets up in 5-10 minutes.
Epoxies

Silver Conductive Epoxy Adhesive sets up in 5-10 minutes.

Suited for similar and dissimilar substrates, EP77M-F forms bonds that are resistant to thermal cycling and chemicals. Full cure takes 8-12 hr at room temperature, and electrical conductivity is first detectable within 30-60 min. With low volume resistivity of 10-3 ohm-cm, 2-component, silver-filled, 100% reactive epoxy adhesive has 4°K to 125°C service operating temperature and 1:1...

Read More »
Adhesive/Sealant bonds dissimilar substrates.
Epoxies

Adhesive/Sealant bonds dissimilar substrates.

Cured at room or elevated temperatures, 2-component EP21TDCHT-1 has temperature range serviceability of -100 to +400°F. Compound serves as electrical insulator with volume resistivity of 1014 ohm-cm. Epoxy adhesive/sealant is resistant to vibration, impact, and thermal shock as well as exposure to water, oils, and organic solvents. It has 70 Shore D hardness, 3,000+ psi tensile strength,...

Read More »
Epoxy Putty protects equipment against impact and abrasion.
Epoxies

Epoxy Putty protects equipment against impact and abrasion.

Wear Guard(TM) High Impact non-VOC, 100% solids formulation contains flexible acrylate and micro-alumina ceramic beads. Recommended applied thickness is min Â-¼ in., and on vertical surfaces, putty can be troweled up to ¾ in. thick without sagging. After 7 days it provides 85 Shore D hardness, compressive strength of 7,250 psi, adhesive tensile shear of 2,567 psi, and flexural...

Read More »
Epoxies

Epoxy Adhesive targets consumer electronics companies.

Loctite® 3629 features low temperature cure, making it suited for applications where heat sensitive materials must be bonded prior to wave soldering. Successfully tested in lead-free production environments, surface mount product also meets standards of on-board reliability testing such as SIR testing. Available in syringes and cassettes, uncured adhesive is fluorescent under UV light, and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers