Epoxies

Epoxies

PLIOGRIP ® by Valvoline Panel 60 Adhesive Meets GM Specification GM6449G

DUBLIN, Ohio - PLIOGRIP by Valvoline Panel 60 adhesive, a rubber-toughened epoxy from Ashland Specialty Chemical, a division of Ashland Inc. (NYSE:ASH), was recently recognized by General Motors Corporation to meet the aftermarket metal bonding specification GM6449G. GM6449G, Automotive (Metallic) Panel Bonding Performance Guidelines for After Market Service Use," details performance guidelines...

Read More »
Epoxy Adhesive provides temperature resistance to 365°F.
Epoxies

Epoxy Adhesive provides temperature resistance to 365°F.

Used in applications requiring bond strengths up to 4,770 psi, 2-part, ceramic-filled Aremco-Bond(TM) 2310 is gray-pigmented, 100% solids epoxy adhesive with flexural strength of 12,000 psi, volume resistivity of 3.0 x 1013, dielectric strength of 410 V/mil, and dielectric constant of 4.28 at 1 kHz. Cured product exhibits linear shrinkage of .001 in./in. and Shore-D hardness of 78. Recommended...

Read More »
Epoxy Adhesive is serviceable at temperatures down to 4°K.
Epoxies

Epoxy Adhesive is serviceable at temperatures down to 4°K.

With 3-minute set-up time, EP51M produces bonds with 2,000+ psi shear strength that exhibits resistance to thermal cycling and chemicals. Bonded parts can be safely handled within 30 min. Product, suited for cryogenic applications, adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Insensitive to cleaning procedures, it can be used in electronic, electrical, computer,...

Read More »
Single-Part Epoxy System cures with UV light or heat.
Encapsulation Equipment

Single-Part Epoxy System cures with UV light or heat.

Environmentally friendly UV15DC80, suited for bonding, sealing, coating, and potting, requires no mixing and has 100% solids formulation. Uninhibited by oxygen, chemically resistant epoxy contains no solvents or volatiles and adheres to variety of materials. For thicknesses of .010-.020 in., straight UV curing is accomplished within seconds with UV light at 365 nm with 30-40 mW/cmÂ-² of...

Read More »
Adhesive Epoxy has operating range of -65 to 400°F.
Coatings

Adhesive Epoxy has operating range of -65 to 400°F.

Designed for high performance bonding, sealing, and casting, Model EP21TDC-4HT epoxy compound resists vibration, impact, and shock, and can be room temperature or heat-cured. High physical strength properties include tensile strength of 8250 psi, tensile shear strength of more than 2800 psi, and peel strength exceeding 36 pli at 25°C. Featuring volume resistivity greater than 1014 ohm-cm,...

Read More »
Epoxy System resists temperatures up to 400°F.
Coatings

Epoxy System resists temperatures up to 400°F.

Medium-viscosity, 2-component EP30HT has 4:1 mix ratio by weight, is 100% reactive, and does not contain solvents or volatiles. It cures at room temperature or more rapidly at elevated temperatures. Serving as adhesive/sealant, coating, and casting compound, product adheres to metals, glass, ceramics, woods, vulcanized rubbers, and plastics. Optically clear formula has refractive index of 1.54...

Read More »
Epoxy Adhesive is chemical and temperature resistant.
Epoxies

Epoxy Adhesive is chemical and temperature resistant.

Formulated to withstand repeated cycles of steam, ethylene oxide, radiation, and chemical sterilization, EP62-1MED 2-component epoxy adhesive system cures at 150-200°F temperatures and is serviceable up to 400°F. USP Class VI approved adhesive contains no solvents or volatiles and has 100:10 mix ratio by weight. Available in pint, quart, 1 and 5 gal kits, product exhibits less than...

Read More »
Miscellaneous Compounds

New Material Set from Henkel Delivers Exceptional Performance for Stacked CSP (SCSP) Packages

Irvine, California, August 8, 2006 New Material Set from Henkel Delivers Exceptional Performance for Stacked CSP (SCSP) Packages The next in a series of recently introduced optimized material sets, Henkel has announced a materials combination designed specifically for the unique manufacturing requirements of stacked CSP (SCSP) devices. Uniting the robust performance characteristics of die attach...

Read More »
Adhesive is formulated for strength and flexibility.
Epoxies

Adhesive is formulated for strength and flexibility.

Epoxy-casting compound, TRA-CAST 316C01, is low-viscosity material that exhibits minimal residual stress and near-zero shrinkage. Able to bond to ceramics, glass, plastics, and metals, product offers self-sealing properties that make it useful for electronics and aerospace applications. Electrical insulator is resistant to water, weather, gases and vapors, petroleum products, mild acids and...

Read More »
Adhesive is suited for bonding semiporous materials.
Epoxies

Adhesive is suited for bonding semiporous materials.

Available in pre-mixed and frozen syringes, TRA-BOND 342-14T single-component, alumina-filled epoxy adhesive has low-viscosity formulation that exhibits thermal shock resistance. Material may be cured overnight at ambient conditions or at elevated temperatures for accelerated cure time. It adheres to various substrates and is suited for bonding materials such as ferrite, which require physical,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers