Epoxies

Epoxies

Adhesives suit production of electronic components.

Featuring chemical and moisture resistance, ARALDITE® Epoxy Adhesives are suitable for bonding and potting electronic components. Room temperature- and elevated temperature-curing products are RoHS-compliant and sag resistant. Providing lap shear strength, high-temperature ARALDITE® Polyurethane Adhesives can bond hard-to-join thermoplastic substrates and encapsulate...

Read More »
Transparent Epoxy is resistant to high temperatures/humidity.
Epoxies

Transparent Epoxy is resistant to high temperatures/humidity.

With service temperature range of -60°F to over 400°F, Type EP30HT epoxy produces high strength, rigid, chemical resistant bonds, and adheres to similar and dissimilar materials such as metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Product attains shear bond strengths over 3,200 psi, with volume resistivity greater than 1,015 W-cm, dielectric strength of 440 V/mil,...

Read More »
Epoxy Resin Compound features high thermal conductivity.
Miscellaneous Compounds

Epoxy Resin Compound features high thermal conductivity.

Suitable for use in both thick/thin sectioned configurations, EP21TDC-2LO bonding, sealing, coating, and encapsulation system has thermal conductivity of 9 BTU/in./ftÂ-²/hr/°F and volume resistivity of 1,012 Wcm. With service operating temperature range of 4 K to 250°F, room temperature curable product features Shore D hardness of 36, elongation of 50%, 1:3 mix ratio by weight or...

Read More »
Resins

GS Polymers, Inc. Announces Product Line Roll Out

GS Polymers, Inc. is proud to introduce their new product line of polyurethane and epoxy products. As specialty formulators of adhesives, potting compounds, casting resins and cast parts, GS Polymers has provided excellent products and services to hundreds of customers over the years. Now, GS Polymers has taken the best of their best to create this superior product line. How does this help your...

Read More »
Paste

Adhesive Paste suits flip chip image sensor applications.

Hysol® FP5110 offers adhesion to 2- and 3-layer flexible printed circuits by bonding to polyimide and epoxy adhesive material. It provides an alternative to mechanical soldering by bonding bumps to substrate through lead-free compatible thermal compression process that eliminates need for flux application, reflow, and cleaning. Other features include 10 sec SnapCure at 180°C, storage...

Read More »
Miscellaneous Compounds

Ashland Introduces Powder-Prime Capable SMC Resin/Adhesive System

DUBLIN, Ohio - New technology from within Ashland Performance Materials has developed a powder-prime capable sheet molding compound (SMC) formulation and adhesive for automotive component assembly. A first for the automobile industry, this system was developed by Ashland Composite Polymers and Ashland Specialty Polymers & Adhesives, business groups of Ashland Performance Materials, a division of...

Read More »
Epoxies

PLIOGRIP ® by Valvoline Panel 60 Adhesive Meets GM Specification GM6449G

DUBLIN, Ohio - PLIOGRIP by Valvoline Panel 60 adhesive, a rubber-toughened epoxy from Ashland Specialty Chemical, a division of Ashland Inc. (NYSE:ASH), was recently recognized by General Motors Corporation to meet the aftermarket metal bonding specification GM6449G. GM6449G, Automotive (Metallic) Panel Bonding Performance Guidelines for After Market Service Use," details performance guidelines...

Read More »
Epoxy Adhesive provides temperature resistance to 365°F.
Epoxies

Epoxy Adhesive provides temperature resistance to 365°F.

Used in applications requiring bond strengths up to 4,770 psi, 2-part, ceramic-filled Aremco-Bond(TM) 2310 is gray-pigmented, 100% solids epoxy adhesive with flexural strength of 12,000 psi, volume resistivity of 3.0 x 1013, dielectric strength of 410 V/mil, and dielectric constant of 4.28 at 1 kHz. Cured product exhibits linear shrinkage of .001 in./in. and Shore-D hardness of 78. Recommended...

Read More »
Epoxy Adhesive is serviceable at temperatures down to 4°K.
Epoxies

Epoxy Adhesive is serviceable at temperatures down to 4°K.

With 3-minute set-up time, EP51M produces bonds with 2,000+ psi shear strength that exhibits resistance to thermal cycling and chemicals. Bonded parts can be safely handled within 30 min. Product, suited for cryogenic applications, adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. Insensitive to cleaning procedures, it can be used in electronic, electrical, computer,...

Read More »
Single-Part Epoxy System cures with UV light or heat.
Encapsulation Equipment

Single-Part Epoxy System cures with UV light or heat.

Environmentally friendly UV15DC80, suited for bonding, sealing, coating, and potting, requires no mixing and has 100% solids formulation. Uninhibited by oxygen, chemically resistant epoxy contains no solvents or volatiles and adheres to variety of materials. For thicknesses of .010-.020 in., straight UV curing is accomplished within seconds with UV light at 365 nm with 30-40 mW/cmÂ-² of...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers