
Epoxy Adhesive features single-component, non-drip formula.
Designed to bond to similar and dissimilar substrates, Master Bond EP13ND requires no mixing, has unlimited working life at room temperature, and features service operating temperature of -60 to 450°F. Product cures at temperatures of 300-350°F in 60-90 minutes. Upon cure, adhesive obtains tensile shear strengths in excess of 3,500 psi at 75°F. Formula is 100% reactive, does not...
Read More »
Thermally Conductive Epoxy also offers electrical insulation.
With thermal conductivity over 22 BTU/in/ftÂ-²/hr/°F and serviceability from -60 to +400°F, EP21ANHT helps mitigate issues associated with tightly packed components and miniaturized electronic circuits. This 2-component adhesive, sealant, and coating has 1:1 mix ratio by weight or volume and cures at room or elevated temperatures. Also able to act as electrical insulator, cured...
Read More »
Two-Part Epoxy Adhesive/Sealant is cryogenically serviceable.
Formulated for applications subject to temperature cycling, vibration, and mechanical shock, EP21TDCHT-LO withstands cryogenic temperatures and meets NASA low outgassing specifications. It offers 1:1 mix ratio by weight or volume and cures at room temperature or more rapidly at elevated temperatures. Properties include 4K to +350Â-ºF service temperature range, shear strength exceeding 2,500...
Read More »H.B. Fuller Adhesives Earn NSF Certification
ST. PAUL, Minn. -- H.B. Fuller Company (NYSE: FUL), a leading global adhesives provider, has received notification from NSF International that two of its potting compounds (FE7811 Epoxy and UR2187 Polyurethane) for hollow fiber water filtration have been tested and certified by NSF to NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects. While H.B. Fuller has had the adhesive...
Read More »
Nylon Fasteners & Rivets: How Environmental Factors Impact Extraction Force
To learn more about what can affect your nylon fastener's extraction force, and how to avoid adverse side effects, download this white paper now.
Read More »
Two Component Epoxy resists fuel, acid, and agressive chemicals.
Developed for coating and lining storage tanks, piping, scrubbers, and processing equipment in chemical industry, Master Bond EP21ARHT produces bond strength greater than 2,200 psi once fully cured. Also used in electronic, electrical, and metalworking industries, product can withstand immersion in 96-98% sulfuric acid and 20% hydrochloric acid for more than 1 year. Epoxy features dielectric...
Read More »
Thermally Stable Epoxy meets NASA low outgassing specifications.
Master Bond EP65HT-1 has glass transition temperature exceeding 125Â-ºC, and is serviceable over temperature range of -60 to +400ºF. It features tensile shear strength approaching 3,000 psi, and Shore D hardness greater than 75. Able to bond to metals, glass, ceramics, rubbers, and plastics, this dark brown, electrically insulating adhesive cures at room temperature in 3-5 min in...
Read More »
Flexible, Conductive Adhesive replaces solder in solar cells.
Formulated for optimized bond strength and flexibility required for bonding of solar array components, 124-08 electrically conductive epoxy adhesive features coefficient of thermal expansion compatible with composition of thin film PV cells. This 1- or 2-component, pre-catalyzed solution, which can be injected via syringe or jet dispensed, is resistant to humidity, has cure temperature range of...
Read More »
Spot Repair Resin Rescues Porous of Cracked Castings from Remelt
EAST PROVIDENCE, RI - IMSEAL-800(TM), a high-strength epoxy resin, seals gross (visible) porosity in castings and other metal parts. It completely and permanently fills blowholes, cracks, and other such defects where welding or brazing would be impractical. Available from IMPCO, Inc., the clear, multi-purpose sealant is drawn deep beneath the surface, penetrating and filling the void and creating...
Read More »
Room Temperature Curing Flexibilized Epoxy Combines High Strength and Toughness with Chemical and Abrasion Resistance
HACKENSACK, NJ - Combining the benefits of epoxy resins and polyurethanes, Master Bond Polymer System EP30D-7 offers superior strength, flexibility, abrasion resistance and toughness. This two component epoxy is ideal for high performance bonding, sealing, coating, and encapsulating applications in the electronic, electrical, computer, metalworking, optical, electro-optical and oil/chemical...
Read More »
Thermally Conductive, Low Viscosity Epoxy Features Cryogenic Serviceability
HACKENSACK, NJ - Master Bond EP30FLAO is a two component epoxy resin system for high performance potting, bonding, sealing and coating. It is extremely versatile and can be used in a wide variety of cryogenic applications. This low viscosity epoxy with excellent flow characteristics makes it ideal as a thermally conductive potting compound. It is widely used in the electronic, electrical,...
Read More »
Solder Redefined
Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.
Read More »