Epoxies

UV Cure Adhesive suits electronics assembly applications.
Epoxies

UV Cure Adhesive suits electronics assembly applications.

Non-conductive 535-10M-1 is flexible epoxy adhesive that suits disk drive, camera module, optoelectronic, and circuit assembly applications. Product is designed to eliminate any crowning (warpage) of sliders in head gimbal assemblies and can be used in other bonding applications in head stack assembly. Also, this antimony-free adhesive can be used for lens bonding in camera modules, chip...

Read More »
Electrically Conductive Silver Adhesive cures in 45 seconds.
Epoxies

Electrically Conductive Silver Adhesive cures in 45 seconds.

Used for cold soldering and bonding electrical and electronic components where soldering is impractical, Metaduct(TM) 1245 is 100% solid silver adhesive formulated as electrically conductive, 2-part epoxy that cures at room temperature. This solvent-free, non-bleeding, thixotropic, and non-flammable adhesive, able to replace leaded and lead-free hot solder, provides over 600 psi tensile shear...

Read More »
Epoxy Compound serves potting applications from -67 to 365°F.
Encapsulants

Epoxy Compound serves potting applications from -67 to 365°F.

Available for electrical and electronic potting applications, thermally conductive Aremco-Bond(TM) 2318 is medium-viscosity (16,000 cP mixed), black-pigmented epoxy compound with 12,300 psi flexural strength and 1,135 psi tensile-shear strength. Other properties include volume resistivity of 3.0 x 1015, dielectric strength of 460 V/mil, and dielectric constant of 4.8 at 1 kHz. Recommended cure...

Read More »
Epoxies

Medical Grade Epoxy Adhesive meets USP Class VI requirements.

Available in 1-55 cc syringes, EPOXIBOND 106 can cure at room temperature or with heat to cut cure time. Low-viscosity product is completely biocompatible, and tensile strength can reach over 4,000 psi at room temperature. Serviceable over temperature range of -40 to 200°C, adhesive is resistant to severe thermal cycling and many chemicals, including water, fuels, oil, and most organic...

Read More »
Epoxies

Engineered Material Systems Debuts New 535-10M UV Cure Adhesive for Disk Drive Applications

DELAWARE, OH - Engineered Material Systems, a leading global supplier of electronic materials for circuit assembly applications, introduces its 535-10M UV Cured Epoxy formulated for disk drive, camera module, optoelectronics and circuit assembly applications. This new non-conductive UV cured adhesive cures rapidly when exposed to high intensity UV light. 535-10M is a low outgassing, flexible,...

Read More »
Encapsulants

Epoxy Potting Compound withstands temperatures up to 392°F.

Used to encapsulate small electrical components in medical device industry, EC-1014M-1 meets NASA outgassing standards and offers optimal performance in extreme environments of heat and caustic chemicals. Thermally conductive potting compound provides Shore D hardness of 90 when cured, which enables resistance to physical shock. In addition to pint, quart, gallon, and 5 gallon sizes, product is...

Read More »
Epoxy Adhesive withstands exposure to UV rays.
Epoxies

Epoxy Adhesive withstands exposure to UV rays.

Virtually invisible, type 10-3713, 2-component epoxy adhesive dries clear so excess material is barely noticeable. Formulated with agents that guard against UV rays, non-yellowing epoxy has low viscosity that allows for good coverage of all surfaces, and bonds to most substrates. It penetrates substrates to form bonds at room temperature or with mild heat.

Read More »
Epoxies

Low-Viscosity Epoxy Adhesives offer fast set times.

Setting in 5, 20, and 46 min, respectively, Quick-Set Trio (10-3005, 10-3020, and 10-3046) cure at room temperature. Clear and solvent-free products are suited for bonding plated metals, pewter, glass, wood, ceramic, felt, cement, gem stones, rubbers, plastics, and more. Offered in TriggerBond dual barrel cartridge system or bulk packaging, products meet UL94 HB requirements; resist effects of...

Read More »
One-Part Epoxy adheres to metal and ceramics.
Epoxies

One-Part Epoxy adheres to metal and ceramics.

Primarily used for testing adhesion or cohesive strength of flame sprayed coatings as per ASTM C633 specification, Master Bond EP15 features tensile strength exceeding 12,000 psi at room temperature and viscosity of 40,000-65,000 cps. Chemical-resistant product is serviceable from -60 to 250°F and withstands thermal cycling. Applied with brush, paint roller, or spatula, 100% reactive system...

Read More »
Trelleborg Supports 'e-Go' Innovation
Tooling

Trelleborg Supports 'e-Go' Innovation

High performance tooling block from Trelleborg Offshore has been used in the development of an innovative new Single Seat De-Regulated (SSDR) class aircraft designed by UK based light aircraft company, e-Go aeroplanes. Trelleborg sponsored the project by providing its EP678 tooling block to help with the development of the state-of-the-art 'e-Go' aircraft, which was the winning design in a...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers