New Controls & Controllers Products

VXI Controller has embedded PowerPC processor.

V152 VXI Slot-0 Controller is available with 233, 350, or 450 MHz clock speeds and memory up to 512 Mbyte DRAM. Single width, C-size VXIbus module has four 16-bit programmable counters/timers, voltage sensors, watchdog timer, status LEDs, and fast Ethernet link using TCP/IP protocol. Options include SCSI, IEEE488, and RS232 serial port. Controller runs Wind River's VxWorks(TM) real-time...

Motor Speed Control is bi-directional.

WMC140 dc motor control provides forward and reverse control of battery powered brush type permanent magnet dc motors. It uses MOSFET PWM for variable speed operation and direction control. Thermal overload shutdown and adjustable current limit fold-back protect against excessive motor current from high starting or stall conditions. Models are available for 12 or 24 V applications up to 55 A.

Clamp Control operates pneumatic tensile-tester clamps.

Electronic ESL Pneumatic Clamp Control fits all tensile testers and plugs into standard 110 Vac outlet. It comes with filter/suppressor, air-pressure gauge, and pressure-control valve. Actuated by double-acting foot switch, both hands remain free for loading and unloading of test specimens. Foot switch has 3 operating positions: both clamps open; upper clamp closed; and both clamps closed....

Drive Assembly automatically adjusts tool head stroke.

Linear Drive Assembly requires no programming and has mechanically triggered controls. As system operates, ratchet lever is actuated when linear drive passes by, causing end stops to automatically move apart or together in increments relative to dialed-in value. Rolling ring drive in assembly runs on smooth shaft and provides up to 800 lbs of axial trust. Travel speed is up to 13 ft/sec at...

The Ultimate Guide To Hydra Pneumatic and Servo Cylinders

This white paper provides a guide to hydra pneumatic and servo cylinders.

CNCs suit common to complex applications.

PC-based Axium Power CNCs include wide range of digital drives and motors. ARS (Advanced Resonance Suppression) provides intelligent compensation for imperfections in stiffness and elasticity of machine by increasing feedback loop gain. Power panel runs under Windows(TM) 2000. Remote diagnostic, unattended CNC system back-up, or fully remote system operation is possible via Ethernet connection...

Vehicular Repeater teams mobiles and portables.

Titan Repeater puts mobile's transmit power in hands of portable 2-way radio users. It mounts into chassis of mobile radio and integrates without external cables. Unit is available in VHF 146-174 MHz or UHF 450-470 MHz models, and can be programmed with up to 16 Rx/Tx channels with 12.5 kHz or 25 kHz channel spacing. Portable transmission is received at 2 W and retransmitted by mobile at unit's...

Network I/O works in motion control applications.

High-Speed Counter, Single-Axis Positioning, and 32 point I/O units work with company's GLC and LogiTouch controllers and Flex Network system. High speed counter accepts inputs from rotary encoders using either open collector or line driver connections. Positioning unit provides CW or CCW pulse output for servo or stepping motors. I/O units include 32 point input, 16 point input/16 point output,...

AC Drives provide variable speed control.

SpinMaster(TM) and SpinMaster(TM) Plus micro drives are suitable for simple speed control applications, soft starting or reversing operation. Plus version has 18 isolated inputs and outputs plus RS485 Modbus interface. Available in Ã-¼ to 25 hp models, both drives work with company's microMAX(TM) inverter duty line of motors. Applications include fans, pumps, conveyors, and packaging...

Digital Temperature Controller with flexible programming.

Model 2901 controls industrial equipment in temperature ranges from 100 to 900Ã-

Industrial Control Modules utilize Ethernet gateway hub.

Model 2601 hub connects unlimited satellite modules, which perform functions of analog I/O (model 2608), 8 relay outputs (model 2650), and 48 digital I/O (model 2610). Analog module also has 16 inputs and 4 D/A's. Model 2601 connects to user's 10/100 base-T LAN to distribute communication and power to 16 satellite modules. Several gateway modules may be connected to LAN for large systems. All...

Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions

Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.