New Controls & Controllers Products

Microcontroller has analog-to-digital converter.

Model PIC16F72 Flash microcontroller offers migration path for applications that require reprogrammable Flash memory. Available in various 28-lead packages, microcontroller suits small memory applications requiring analog functionality with serial communication and digital I/0. It offers 3.6 Kbyte Flash program memory, 128 bytes RAM, up to 5 MIPS performance at 20 MHz, and operating voltage range...

Motor Drive features built-in LED display and keypad.

Variable speed Reliance MD60 microdrive for output frequencies up to 240 Hz has internal dynamic brake circuitry, finger-safe IP20 enclosure, and V/Hz operation from Ã-¼ to 5 hp. It is available in 115 Vac, 230 Vac, and 460 Vac ratings. Drive can be used for industrial applications, such as material handling, fans, and pumps. It has constant torque over 40:1 speed range.

Temperature Regulator suits heating/cooling applications.

Self-actuated Series 2000 Temperature Regulator offers one-piece, hardened stainless steel plug and shaft that resists plug erosion. Single or double-seated regulator is available as reverse or direct acting. Its two or three way bronze valves feature galvanized iron union ends, spring loaded TeflonÃ-® chevron type packing, and copper bulb with armored capillary. Regulator is available in...

Test/Simulator Cards conform to CompactPCI standard.

BU-65570T and BU-65572T card level products test and simulate MIL-STD-1553 buses. Cards provide full and intelligent interfacing for one or two, serial, dual-redundant data buses. BU-65570T is fixed 1553 transmitter voltage card, while BU-65572T provides variable transmitter voltage. Both simulate Bus Controller and 31 remote terminals and provide selectable, triggerable Bus Monitor for each...

Super Precision Bearings for Machine Tools: Factors For A Successful Spindle Bearing Set Up

This white paper provides an in-depth overview into choosing the right bearing for machine tools.

Motor Controller outputs 1,000 W in small footprint.

Compact Model 371-0028 brushless dc controller measures 3.00 x 4.65 x 1.75 in., and weighs 0.44 lb. It is suitable for velocity and torque control of motors producing more than 160 oz-in. torque at 7,000 rpm. Input can vary from 10 to 50 V with rating of 20 A continuous and peak of 40 A. It has quick disconnect, on board LED status indication, and tachometer output. Its amplifier is protected...

Interface Board includes support for OPC tests utilities.

SeaPORT ISO-16 provides 16 optically independent, isolated inputs, which provide 1000 V of channel to channel and channel to computer isolation. It monitors signals from 5 to 24 V and eliminates effects of ground loop current. Onboard removable screw terminal connectors are included. Its 72 in. USB A to B cable is included; 18 in. cable is also available. SeaPORT can be DIN rail mounted, and...

DIN Controller is suitable for OEM markets.

Model SA100 DIN controller employs two methods of determining PID constants; self-tuning constantly monitors control state and adjusts PID parameters for optimum control, and auto-tuning allows PID constants to be reset and held in memory. Unit accepts thermocouple, RTD, and voltage or current inputs. Its two points of output suit control, alarms, or analog retransmission. Alarm choices include...

Process Drive suits high-volume dispensing applications.

Stainless steel MasterflexÃ-® I/PÃ-® variable-speed digital console process drive (77420-00) is IP55 rated. Wash-down drive provides flow range of 0.12 to 17 lpm with one I/P pump head. It accepts up to two stacked I/P Easy-LoadÃ-® or I/P Standard pump heads, or one I/P High-Performance pump head. Drive features digital display readouts of flow rate, motor rpm, dispensing volume, and...

Belt Drive Systems hold up to 598 lbs in axial orientation.

Capable of speeds up to 196 in./sec with stroke lengths to 12 ft, REDI-RAIL BELT DRIVE SYTEMS can integrate into existing linear motion applications by using T-slot mounting system and NEMA motor mount blocks. They feature aluminum base structures and hardened steel raceways. Guidance systems or carriages offer 3 dual row ball bearings. Center roller is adjustable for preload via set-screws...

Environmental Chamber Control adjusts temperature and humdity.

X26 can store 50 programs with up to 100 steps per program. Program profiles can be set up via controller's front panel using iTools or via Windows setpoint program editor. Real-time clock can be set to start programs at defined times of day and/or week. It has boost heat, boost cool, compressor on/off outputs, program holdback to guarantee soak time at proper temperature and humidity, and 6 sets...