Connecting CANopen Devices to the SIMATIC® S7-1200 PLC
Automation Systems

Connecting CANopen Devices to the SIMATIC® S7-1200 PLC

The CM CANopen module from HMS Industrial Networks enables users of the SIMATIC S7-1200 PLC to integrate CANopen devices into their automation systems (using the TIA Portal®). The CM CANopen is an extension module for the SIMATIC S7-1200, enabling the PLC to communicate with devices on a CANopen Network. The product is developed by HMS Industrial Networks and is fully approved by the...

Read More »
Automation Systems

Siemens Supports Production Efficiency and Sustainability

Siemens supports production efficiency and sustainability Spotlight on efficient, sustainable production under the trade fair banner Making Things Right" Integration of virtual processes and real production Comprehensive range of new automation and drive technology products, software and services At this year's SPS IPC Drives automation trade fair, Siemens will be supplying answers to the current...

Read More »
Circuits

Sensor Signal Interface IC offers high resolution, low power.

Intended for MEMS-based pressure sensor modules, MAS6503 usesÂ- ratiometric ADC principle employing delta-sigma (∆Σ) conversion technique and communicates via 2-wire I²C serial bus interface. This 24-bit piezo resistive sensor signal interface IC, operating from 1.8–3.6 V, consumes 18.3 µA — with one pressure conversion in 1 sec at max resolution and including...

Read More »
Gas Turbine Upgrade Technology enhances output, fuel efficiency.
Controls and Controllers

Gas Turbine Upgrade Technology enhances output, fuel efficiency.

Available forÂ- 9F-3 and 9E gas turbines Advanced Gas Path (AGP) technology enables respective output increases of up to 6% and 3.8%, fuel efficiency increases up to 2% and .9%. Maintenance intervals can reach up to 32,000 hr for 9F-3 and as long as 32,000 hr/1,200 starts for 9E, extending outage intervals up to 33% for both. Along with OpFlex™ advanced controls...

Read More »
Monitoring Systems

Remote Monitoring Unit provides accurate measurements.

Used to monitor cathodic protection assets remotely, Bullhorn RM4150 helps operators meet 49 CFR 192/195 regulations and protect pipelines by collecting and communicating rectifier measurements using GSM networks. Cellular RMU has 5 analog channels and 2 digital channels to monitor rectifiers on pipelines, well casings, tanks, and other assets. Measurement capabilities, accurate to 1% of reading,...

Read More »
Mechanical Accelerators

CIVCO Announces FDA 510(k) Clearance of Protura(TM) Robotic Patient Positioning System Integration with Varian Clinac® iX and Trilogy® Linacs

CORALVILLE, IowaÂ- – CIVCO Medical Solutions, the leading provider of radiation oncology motion management solutions, is pleased to announce U.S. Food and Drug Administration 510(k) clearance of Protura™ Robotic Patient Positioning System integration with Varian Medical Systems' Motion Management Interface. Protura remotely repositions patients with robotic 6 degrees of freedom to ensure...

Read More »
Solar Panels

Waaree Energies Launches the WS-400 Wp PV Module in India

MUMBAI – This One-of-its-kind Module Boasts of Highest Efficiency and Power as a Single Product in India One of India's leading innovative solar solution companies, Waaree Energies Ltd launches the WS-400 Wp PV module. As the first-of-its-kind single product in India, the WS-400 brings highest efficiency of 18.85% as well as power in the module industry. The Waaree WS-400 Wp module is set to...

Read More »
Eagle Presents Advanced Fat Analysis Innovations at PROCESS EXPO 2013
Controls and Controllers

Eagle Presents Advanced Fat Analysis Innovations at PROCESS EXPO 2013

New software and innovations provide meat processors unrivalled fat analysis accuracy Tampa, Florida — To help global meat processors reach new levels of quality and productivity, Eagle Product Inspection (Eagle) will showcase its advanced fat analysis technology and innovations at PROCESS EXPO 2013, in Chicago, Illinois, (November 3-6, 2013) on Stand 4526. The company will present its...

Read More »
AutomationDirect Supplies Automated Trophies for State Robotics Competition
Automation Systems

AutomationDirect Supplies Automated Trophies for State Robotics Competition

AutomationDirect has supported competitive robotics at the local, regional and national levels for many years. This year, in addition to sponsoring the annual Georgia Robotics Invitational Tournament and Showcase (GRITS) competition, AutomationDirect also provided the very unique trophies awarded to the winners. GRITS is a one-day event, produced by GeorgiaFIRST Robotics, the arm of US FIRST that...

Read More »
Spindle Drives are available with wear-proof ceramic spindle.
Motor Controllers and Drives

Spindle Drives are available with wear-proof ceramic spindle.

With M6 ceramic spindle, GP 16 S transmits up to 315 N in short-term operation.Â- Axial forces are compensated by axial ball bearings in gearhead's output stage, and reduction ratios possible in integrated planetary gearhead makes spindle drive suited for dynamic applications. Offered with metric steel spindles or ceramic spindles, 8 mm GP 8 S features 2 pre-loaded ball bearings that serve...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics