Miscellaneous Controllers

New SM2270 PCIe NVMe SSD Controller Supports Standard NVMe and Open Channel Technology
Miscellaneous Controllers

New SM2270 PCIe NVMe SSD Controller Supports Standard NVMe and Open Channel Technology

The Dual-Mode SM2270 PCIe NVMe SSD Controller features triple dual-core Arm® Cortex®-R5-based architecture. The unit comes with PCIe Gen 3 x 8 lanes for NVMe 1.3 protocols, 16 NAND flash channels and SSD capacity up to 16TB. The controller delivers up to 800,000 IOPS in 4KB random read operation and supports 96-layer TLC and QLC flash. SM2270 is offered with NANDXtend™ technology for data...

Read More »
New NX1 Series Machine Automation Controllers Offer Motion Control of up to 12 Axes
Miscellaneous Controllers

New NX1 Series Machine Automation Controllers Offer Motion Control of up to 12 Axes

The NX1 Series Machine Automation Controllers are offered in 66 mm wide housing with EtherNet/IP, EtherCAT and OPC UA server interface ports. The units collect synchronized data from sensors and servomotors within fixed cycle time and send the collected data to host IT system. The Ethernet interfaces and database functionality enables the usage of information within and between machines. The...

Read More »
New ADuCM355 Microcontroller Features Integrated Analog Hardware Accelerators
Miscellaneous Controllers

New ADuCM355 Microcontroller Features Integrated Analog Hardware Accelerators

Analog’s ADuCM355 Microcontroller comes with bio-sensor and chemical sensor interface and is suitable for applications such as industrial gas sensing, instrumentation, vital signs monitoring and disease management. Unit offers measurement of voltage, current and impedance and supports dual potentiostat (8.5uA, 1.6uV RMS) and more than 3 sensor electrodes. ADuCM355 features 26 MHz core, 128kB...

Read More »
Latest Digital Signal Controller Features a Robust System Design with Two dsPIC DSC Cores in a Single Chip
Miscellaneous Controllers

Latest Digital Signal Controller Features a Robust System Design with Two dsPIC DSC Cores in a Single Chip

Microchip’s new dsPIC33CH has two dsPIC® DSC cores along with its dedicated peripherals, designed such that one core functions as a master while the other functions as a slave. The slave executes time-critical control code whereas the master core runs the user interface and communication functions also while monitoring the system. Distribution of the overall workload across two DSC cores in a...

Read More »
New MCU Families by Microchip Feature Low Power Consumption and Water-tolerant Capacitive Touch
Miscellaneous Controllers

New MCU Families by Microchip Feature Low Power Consumption and Water-tolerant Capacitive Touch

The latest SAM L10 and SAM L11 MCU families are based on the Arm® Cortex®-M23 core which uses proprietary picoPower® technology to provide low power consumption in active and all sleep modes. The Sam L11 uses a programmable environment Arm TrustZone® that provides hardware isolation between certified libraries and application code. Both MCU families feature peripheral touch controller...

Read More »
Miscellaneous Controllers

Renesas Updates its Model-based Development Environment with Multirate Control for Shorter Product Development Time

Renesas announces an update to Embedded Target for RH850 Multicore for supporting the development of systems with multirate control. By making the environment support multirate control, generation of multicore software code and verification of a whole ECU is possible from models that include multiple periods or systems. This allows estimation of execution performance from early stages and enables...

Read More »
AutomationDirect Introduces Remote I/O Controllers to BRX Micro PLC Product Line, Adding 256 I/O Points
Miscellaneous Controllers

AutomationDirect Introduces Remote I/O Controllers to BRX Micro PLC Product Line, Adding 256 I/O Points

The BRX remote I/O controller provides up to 256 I/O points per remote rack and is designed to work with any Modbus client/master device. The product comes in six controller versions with an inbuilt 10/100 Mbps Ethernet port and supports Do-more! Ethernet remote I/O, Host Ethernet remote I/O, Modbus RTU and TCP protocols. The AC powered units include an integral 24VDC auxiliary output power...

Read More »
Latest RM-LP100 Remote Camera Controller Acts as Virtual CCU for IP-Enabled Camera
Miscellaneous Controllers

Latest RM-LP100 Remote Camera Controller Acts as Virtual CCU for IP-Enabled Camera

RM-LP100 Remote Camera Controller provides basic camera settings such as white balance, iris, shading and record functions. RM-LP100 with tally compatibility eliminates the need for separate tally cables between the switcher and cameras. Unit offers precise camera movements for KY-PZ100 PTZ camera and can control up to 100 cameras and stores up to 100 presets. The camera controller comes with...

Read More »
New Engineering TouchKit from SCHURTER Comes with Multi-Touch Capability
Miscellaneous Controllers

New Engineering TouchKit from SCHURTER Comes with Multi-Touch Capability

Engineering TouchKit consists of Plug and Play 10.1 in. PCAP touchscreen sensor, an EETI chip and a software. Kit can be operated with or without stylus pen for accurate pressure measurement. The multi-touch capability allows simultaneous operation detection of up to 10 fingers and the touchscreen is resistant to moisture. The touch controller is designed to withstand wave fields up to 10 V/m or...

Read More »
MSP432™ Microcontrollers feature 120-MHz Arm® Cortex®-M4F Processor Core.
Miscellaneous Controllers

MSP432™ Microcontrollers feature 120-MHz Arm® Cortex®-M4F Processor Core.

SimpleLink MSP432™ Microcontrollers provide connectivity options such as Ethernet MAC with MII and RMII, PHY with IEEE 1588 PTP hardware support and USB with ULPI Interface Option. Units are available with 1024KB of flash memory, 256KB of SRAM and 6KB of EEPROM memory options and offer multiple wireless connectivity support. These MCUs come with integrated communication peripherals and are...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics