Stepper Motor Controllers and Drives

Applied Motion Launches STR Series Stepper Drives with Advanced Microstepping Performance
Stepper Motor Controllers and Drives

Applied Motion Launches STR Series Stepper Drives with Advanced Microstepping Performance

STR Series Stepper Drives are offered in STRAC2 and STRAC8 models and a current of up to 2.2 A/phase and 0 A/phase respectively. Units are operated on 90 to 240 VAC input voltage supply and are suitable for applications ranging from motion control to basic step and direction. Units feature microsteps of 25,000 steps/rev with 1.8° step motor (1/125 step). The drives allow user to set parameters...

Read More »
STAC6-Q-H Stepper Drive is designed for use in hazardous locations.
Stepper Motor Controllers and Drives

STAC6-Q-H Stepper Drive is designed for use in hazardous locations.

STAC6-Q-H Stepper Drive is suitable for oil, gas, paint, and printing industries where flammable gases, vapors or liquids exist. Unit’s anti-resonance algorithm provides optimal torque with microstepping of 51,200 steps/rev. STAC6-Q-H is powered by single-phase 120 VAC and offers nominal 160 VDC internal bus. Drive features encoder feedback option and can run stored programs created with Q...

Read More »
Custom Angular (Right-Angle, 90 Degree) Drives and Motors
Stepper Motor Controllers and Drives

Custom Angular (Right-Angle, 90 Degree) Drives and Motors

Two-stage angular gearboxes offered by ABM Drives have an efficiency of up to 96 percent. ABM Drives provides the complete assembly including geared motors and integrated motor controller. Typical applications include roller and belt conveyors, container conveyor systems, vertical storage and other material handling logistics. They offer dynamic and reliable operation even in harsh environments...

Read More »
STAC6-Q-H Step Motor Drive works on anti-resonance algorithm.
Stepper Motor Controllers and Drives

STAC6-Q-H Step Motor Drive works on anti-resonance algorithm.

Operating in -40 to +55 °C temperature range with 94-135 VAC, 50/60 Hz, single-phase supply voltage, STAC6-Q-H Step Motor Drive is designed with 7 digital inputs, 3 digital outputs and ±10 volt range 2 analog inputs. Delivering 120 Vdc, 1 phase, 4.24 A (rms) output power, unit is controlled with streaming commands, analog positioning, encoder following and Q programming. Featuring encoder...

Read More »
Stepper Motor Controllers and Drives

Simotics HV HP Motor offers Short delivery periods.

Covering power of up to 70 megawatt, Simotics HV HP motor offers optimized base frame to reduce noise and vibrations. Available with gas and dust explosion protection and variety of cooling methods, unit ensures optimum interaction to Sinamics medium-voltage converters within Integrated drive System (IDS). Suitable for use in aggressive and potentially explosive atmospheres, motor meets API, TR...

Read More »
Stepping Motor Driver can run 2 motors simultaneously.
Stepper Motor Controllers and Drives

Stepping Motor Driver can run 2 motors simultaneously.

With 2-channel drive function, Model TC78S122FNG can run 2 stepping motors independently in high-voltage, low-power MOS process. Bipolar IC also provides interface for driving brushed DC motors, enabling use of stepping motors and brushed DC motors together in 6 combinations. Channels can be paralleled to double power handling. Housed in HTSSOP package with max ratings of 40 V and 2 A, device...

Read More »
EtherCAT Drive Module suits limited space applications.
Stepper Motor Controllers and Drives

EtherCAT Drive Module suits limited space applications.

Featuring dual/quad-axis universal drive, UDMSD Series is designed for servo, step, and voice coil motors with continuous power range of 10–100 W. Module supports up to 4 digital incremental encoder channels and 2 absolute encoder channels. Serial Peripheral Interface supports other feedback devices, such as autofocus signals. Available with currents of 1.25/2.5 A and 2.5/5 A (cont/peak), unit...

Read More »
Single-Axis Electric Actuator Driver/Controller is ODVA compliant.
Stepper Motor Controllers and Drives

Single-Axis Electric Actuator Driver/Controller is ODVA compliant.

Available in servo and stepper control technologies and intended for use with electric actuators, ACS actuator control solution ensures interoperability between ODVA™-conformant devices over EtherNet/IP™. Drives are intended to be controlled from- PLC or master controller via 24 Vdc DIO, 0–10 Vdc or 4–20 mA analog I/O, or Ethernet or Modbus RTU over RS-485. EtherNet/IP communication...

Read More »
Integrated Stepper Motion Technology Improves over 10 Years
Stepper Motor Controllers and Drives

Integrated Stepper Motion Technology Improves over 10 Years

Terryville, CT — Advanced Micro Controls Inc. (AMCI), just released a significant expansion of their SMD (stepper+motor+drive) product family that includes DLR topology, SynchroStep™ technology, IP67 rated versions, gearboxes, NEMA size 23 24 size packages, and compatible cord sets. This latest release provides a comprehensive and affordable solution for a variety of motion control...

Read More »
Single-Axis Drive/Controller works with electric actuators.
Stepper Motor Controllers and Drives

Single-Axis Drive/Controller works with electric actuators.

Combining servo or stepper drive and controller, ACS (Actuator Control Solution) works with electric actuators to create single-axis linear motion solution for replacing pneumatic cylinders and automating processes. Drives are controlled from PLC or master controller via 24 Vdc digital I/O, 0–10 Vdc or 4–20 mA analog I/O, and Ethernet or Modbus RTU over RS-485. Capable of infinite position...

Read More »
Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications
Sponsored

Performance Packaging's AIRSHIELD™ Achieves FDA Approval for Food & Beverage Applications

As a globally recognized provider of full-service packaging products and services, we have a history of developing innovative solutions that promote enhanced efficiency in a wide range of packing applications. Our new AIRSHIELD™ product is just another example of how we are helping food and beverage manufacturers to extend the life of their products. To learn more about this cutting-edge product, see our video.

Read More »

All Topics