Miscellaneous Fixtures

Locking Kits fit Haas machining centers.

Ball Lock(TM) fixture kits contain all components needed to locate and lock fixture plates to subplates. System provides quick change capability, and holds plates together with working loads up to 20,000 lbs. Standard kit includes correctly-sized subplate and fixture plate, both pre-drilled with ball lock bushings installed and correct number of shanks, T-slot nuts, sine fixture keys, and socket...

Read More »
Door withstands wind loads to 88 mph.
Doors

Door withstands wind loads to 88 mph.

Marathon® Hydrarol door has durable metal exterior with ability to open and close at 42 in. per second. Door's exterior is composed of interlocking slats with anodized aluminum, and is reinforced with shock-absorbing PVC interior. It is fully weathersealed with dense R8 polyurethane foam insulation. PVC interior and nylon end caps maintain door alignment, eliminate metal to metal friction...

Read More »
Square Continuous Posts accommodate any centerline.
Electrical Connectors

Square Continuous Posts accommodate any centerline.

AMPMODU square posts can be inserted into printed circuit boards in virtually any configuration. Post is constructed of brass, comes packaged on reel, and is notched at desired length. Carrier strip is not required. Posts are available in 0.025 and 0.045 post sizes, in lengths of 0.400 to 1.0 in. in 0.010 in. increments, with tin or gold plating. The 0.025 square post is rated for up to 3A while...

Read More »
Mats

Non-Skid Safety Mat works when submerged.

Non-skid surface on presence-sensing industrial safety mats is totally submersible as to reduce risk of slipping on surfaces covered with grease and oil. Applications include robotic welding, laser welding and cutting, pick and place robots, plastics blow molding machines, assembly machinery, water jet machines, automated material handling, packaging machinery, textile machinery, paper converting...

Read More »
Wall Systems are virtually indestructible.
Walls

Wall Systems are virtually indestructible.

Concept 2001 panels are made of structural foamed PVC and can be wall-mounted or attached to wood or metal cabinets. Panels will not chip, break, warp, rust or absorb dirt and grease. They resist abrasion, combustion, and most chemicals, including oil and gasoline. Each panel's plastic parts can be easily cleaned. With interchangeable shelves, hooks, brackets, gravity feed containers and bins,...

Read More »
Trailer Suspension System features neutral-toe axle.
Frames

Trailer Suspension System features neutral-toe axle.

INTRAAX AANT 23K tapered-beam primary air-ride trailer suspension-axle-brake system has capacity of 23,000 lb in ride heights from 13.5 to 17 in. Hanger design allows installation directly to trailer frames with flanges as narrow as 4 in. wide. Applications include haulers running straight-frame platforms, container chassis, liquid tankers, bulk tankers, bottom dumps and livestock trailers.

Read More »
Doors

High-Speed Door comes in sizes up to 12 x 12 ft.

SUPERCOMPACT door makes rapid room access beneficial for foot traffic, push carts, pallet jacks, and light forklifts. Its sealing system features self-reparability. Gravity driven system propels door to open at up to 42 in. per second, closing at 24 in. per second. Door is run with 3-phase motor controlled by frequency inverter built-in to a NEMA-4 rated control box. Door can be opened manually...

Read More »
Holding Assemblies are used in metal product manufacturing.
Magnets

Holding Assemblies are used in metal product manufacturing.

Permanent Magnetic Holding Assemblies are designed for positioning, stabilizing, holding, and feeding materials, parts, and scrap. Various standard configurations and sizes are available with insulated Ceramic, Alnico, and Rare Earth Magnets. Assemblies for watertight and high-temperature applications are also available.

Read More »
Vinyl Strip Doorways fit any opening.
Doors

Vinyl Strip Doorways fit any opening.

Vinyl Strip Doorways minimize noise, dust, fumes, and smoke; reduce time opening and closing doors; cut heating and cooling costs; and permit 2-way simultaneous traffic. Strips are available in widths of 6, 8, 12 or 16 in. in any length needed. Temperature service range is from -20° to 160° F. Options include wall or header mounting. Doors are shipped ready to install; replacement...

Read More »
Explosion-Proof Control Enclosures are ATEX-certified.
Enclosures

Explosion-Proof Control Enclosures are ATEX-certified.

XCEX Series is used in installation of electrical and electronic components for control, measurement, or monitoring applications in hazardous environments. Enclosures feature copper-free aluminum construction, which is corrosion resistant with tumblast finish. Wall thicknesses are uniform to aid in installation of control devices, windows, and conduit openings. Integral, cast-on mounting lugs are...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers