New Light-Curable Materials Formulated with Low-Sensitizing Ingredients
Features high viscosity and reliability performance essential to the quality and clarity of an image or the integrity of devices. Designed for electronic wearables such as fitness trackers, smart watches, earbuds and VR headsets. Suitable for applications such as structural bonding, sensor encapsulation, lens alignment and selective coating.
Read More »
Non-Cytotoxic Epoxy Withstands Multiple Methods of Medical Sterilization
Master Bond EP41S-5Med is a two part epoxy system that meets the requirements of ISO 10993-5 for non-cytotoxicity and can be used for bonding, sealing, and coating in medical devices. It features high temperature resistance and good strength properties. As an electrically insulative material, it can be utilized in medical electronic applications. This epoxy was tested against many sterilization...
Read More »
Dymax to Exhibit at MD&M West 2023 Trade Show
Torrington, Connecticut – January 24, 2023... Dymax, leading manufacturer of rapid and light-curing materials and equipment, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at MD&M West booth 1929, from February 6-8, 2023, at the Anaheim Convention Center in Anaheim, CA. For medical device design engineers, the first-of-kind 2000-MW series of medical...
Read More »
New Resins Can Separate and Refine Natural Products
Mixed bed devices are a mixture of anion and cation exchange resins. Chelating resins with chelating agents can remove heavy metal ions. Adsorbent resins are mainly used to remove organic matter in wastewater and decolorize sugar solution.
Read More »
Advantages of Nylon Washers and Other Non-Metallic Materials
Check out this white paper to learn about the types of non-metallic washers.
Read More »
Dymax will Exhibit at The IPC APEX EXPO 2023
On Display: Innovative Light-Cure Solutions Made for Today’s Electronics Torrington, Connecticut – January 10, 2023... Dymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2023 in San Diego, CA, January 24-26. High-tech products for advanced circuit protection and board-level electronic assembly applications will be featured....
Read More »
Electrically Insulative, Toughened Epoxy Meets NASA Low Outgassing Specifications
Master Bond Supreme 42HT-2ND Black is a two-part, non-drip epoxy system designed for bonding, sealing and coating applications. It is capable of withstanding temperatures up to 450°F (232°C), and provides a glass transition temperature (Tg) of 130-135°C. The material meets NASA low outgassing standards and is recommended for applications that require vacuum compatibility. Supreme 42HT-2ND...
Read More »
Electrically Isolating Epoxy Features Ultra High Heat Transfer Capability
Master Bond EP5TC-80 is a one part, NASA low outgassing rated epoxy that achieves a thermal conductivity of 3.3-3.7 W/(m·K), while also retaining its electrical non-conductivity. It requires a cure at only 80°C for 1.5 to 2 hours. To optimize performance properties a post-cure of 1-2 hours at 80°C is recommended. Featuring a thixotropic paste consistency, this compound adheres well to a...
Read More »
LMI Technologies Launches Next-Generation Smart Vision Accelerator to Support its Industry-Leading 3D Smart Sensor Lineup
GoMax® NX delivers massive GPU-driven data processing power to any Gocator® 3D smart sensor or multi-sensor network for increased performance in data-heavy inspection applications. January 20, 2022, Vancouver, BC – LMI Technologies (LMI), the global leader in 3D scanning and inspection, is pleased to announce the official release of our GoMax® NX Smart Vision Accelerator. GoMax® NX is a...
Read More »
Ultra-Low Viscosity, Biocompatible Epoxy Offers Optical Clarity
Master Bond EP4CL-80Med is a one part, optically clear epoxy developed for use in medical device assembly applications. It withstands repeated sterilization cycles and passes ISO 10993-5 testing for non-cytotoxicity. This product cures at moderate temperatures of around 80-85°C within 60 to 90 minutes and faster at slightly higher temperatures. As a one part, non-premixed and frozen system, it...
Read More »
Dymax will Exhibit at The Battery Show 2022
To Be Featured: Light-Curable Materials for High-Tech Batteries & Automotive Electronics Torrington, Connecticut – August 23, 2022... Dymax, leading manufacturer of rapid curing materials and equipment, will exhibit at The Battery Show, booth 1626, Suburban Collection Showplace in Novi, Michigan, September 13-15th. A range of next-generation light-curable material solutions for automotive...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
