New Adhesives & Sealants Products

Cyanoacrylates cure under fluorescent light.

Low-viscosity LoctiteÃ-® FLASHCURE(TM) 4306(TM) and medium-viscosity LoctiteÃ-® FLASHCURE(TM) 4307(TM) offer instant fixture and tack-free surfaces in less than 5 sec when exposed to low-, medium-, or high-intensity light. They are surface insensitive and adhere to metals, elastomers, and plastics. Designed for assembly of components where ability to verify presence of applied adhesive is...

Polyethylene Film Tape works in extreme environments.

Clear, low-density Scapa P933A bonds to common industrial substrates and withstands environmental extremes. It is single-coated with acrylic adhesive formulated to provide high tack, quick stick, and peel strength, while offering humidity, water, and chemical resistance. Able to adhere to metals and engineering plastics, tape features release top-coat that allows film to be converted into...

Polyethylene Resins do not require chemical additives.

Raprex(TM) pre-processed resins are formulated to provide improved physical properties without chemical cross linking agents. Radiation processing of base PE resin results in inhomogeneous cross link distribution in polymer. This results in parts that are higher in mechanical properties than unmodified versions. Available in extrusion, injection molding, and film grades, products exhibit tear...

Automotive Wire Harness Tape facilitates recycling.

Halogen-free, environmentally compliant AutolonÃ-® 824 looks and feels like PVC but emits no toxins during combustion. Harnessing tape consists of polyolefin film single-coated with synthetic rubber pressure-sensitive adhesive. It provides solution for wire harness wrapping, clip retention, and color code identification; offers fogging number from 70-95; withstands temperatures to 85Ã-

The Ultimate Guide to Packaging Automation Solutions

This ebook provides an in-depth guide to packaging automation solutions.

Epoxy System repairs cast iron and steel to 450-

Pyro-Putty(TM) 657 repairs pin holes, cracks, and defects in cast iron and sheet metal prior to painting and powder coating. Stainless steel filled, 1-to-1 mix epoxy system provides continuous and intermittent temperature limits of 400 and 450-°F, respectively. Dispensable, thixotropic paste cures fully at room temperature in 4-6 hr; cured material exhibits tensile shear strength of 1,860 psi...

Machinable Liquid Metals repair, rebuild, and bond.

Durabond RK454 High Temperature Epoxy Putty cures in 24 hr at room temperature or 2 hr at 250-°F to form machinable material for use up to 500-°F. Durabond 7025, rated to 1,000-°F, is formulated with active aluminum metal for resistance to corrosion, erosion, chemicals, and solvents. It cures in 24 hr at room temperature or 2 hr at 250-°F. Durabond 7032 Stainless Steel-Ceramic composite is...

Instant Epoxy withstands temperatures up to 400-

Bond-It(TM) 7056 adheres to smooth, rough, or porous surfaces, most plastics, metals, ceramics, glass, and wood and is suitable for joining dissimilar materials. It cures as fast as 4 min, with no fixtures or clamps, to form bond with tensile strength of 3,000 psi at room temperature. Product rebuilds surfaces and fills gaps measuring up to Ã-¼ in. It has no sulphur like odors, volatiles, or...

Acrylic Adhesive bonds needles and syringes.

MDÃ-® Medical Device Adhesive 1193-M-VLV is low viscosity for quick, air-free dispensing into needle hub cavities. It bonds stainless steel cannula to polycarbonate, PVC, and polypropylene hubs. Product cures in fraction of a second when exposed to high intensity UV light. It produces clear bonds with minimal variation in tensile strength values. For in-line inspection, MD 1193-M-VLV contains...

Zirconia Adhesive suits automatic dispensing applications.

Resbond(TM) 904 is a 4,000Ã-

Adhesive Tape suits direct skin applications.

Woven-fabric BioflexÃ-® Rx632P offers conformability for curved areas of body and suits roll-form and specialized bandage application. Tape consists of tan, woven fabric, single coated with medical-grade acrylic. Pressure-sensitive adhesive removes cleanly without causing skin trauma and is supplied on 42# kraft release liner to allow easy die cutting.

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.