New Adhesives & Sealants Products

Epoxy Adhesive provides semi-rigid bonds.

Tra-Bond 293-1T general purpose epoxy adhesive provides strong bonds to difficult-to-bond substrates, such as gold, nickel, silver, copper and brass. It can be cured at moderate temperatures from 60 to 75Ã-

Syntactic Repair Adhesive can be drilled, sawed and shaped.

TRA-BOND 2125 two-part system is composed of micron-sized glass spheres in epoxy binder. Chemical-resistant adhesive bonds to most surfaces, including metals, building construction products, glass, glass fabrics, and plastics. TRA-BOND 2125 is suitable for use in industrial repair, bonding, and casting applications.

Lens Bonding Adhesives have unlimited pot life.

Optically clear, low movement, low shrinkage lens assembly adhesives include UV blocking grades, which exhibit excellent adhesion to PVA, CR-39, and CAP, and provide UV/visible protection to 410 nm. Design eliminates birefringence. Low shrinkage, low outgassing opaque adhesives are available in viscosities from thin wicking grades to thixotropic gels. Adhesives cure when exposed to low/medium...

UV Curable Epoxies provide durable bonds quickly.

Formulated to cure rapidly, epoxies produce slick, smooth, dry surfaces that provide bonding, sealing and protective coatings in seconds, and reach full strength in 1-24 hr. Cured epoxy bonds exhibit low shrinkage and outgassing properties and offer good solvent and temperature resistance. They adhere to glass, metal and wide variety of plastics. Surface treatment provides adhesion to some...

Must-Ask Questions When Choosing a Foam Control Agent

This eBook discusses foam controlling agents and how to find the right one for your needs.

Putty cures at room temperature

Durabond(TM) 7032 1-component, metallic putty cures at room temperature to form machinable, stainless steel composite with high bond strength and excellent chemical, corrosion, and shock resistance. It has no harsh odors or outgassing, and does not contain flammable solvents. Durabond 7032 will not run or sag while applying. Putty repairs pumps, valves, fittings and equipment; rebuilds worn...

Polyurethane Adhesive contains flourescent trace.

Improved TRA-BOND 724-20 provides bond-line control for critical alignment applications. Pre-mixed and frozen polyurethane adhesive provides strong, resilient bonds to various substrates including aluminum, solder, nylon, mylar and steel. Adhesive strength is maintained even in cryogenic conditions. Polyurethane exhibits good dielectric properties, and offers multiple curing options, including...

Water-Based Adhesives suit automotive assembly applications.

Environmentally friendly water-based adhesives work on porous substrates such as foams, cloth, felt, and insulation, and non-porous materials such as wood, plastic and metals. Products are available with fast-tack and foam tearing strength comparable to solvent based adhesives. Adhesives are fast setting for use in general upholstery, foam-to-foam, foam-to-fabric, or foam-to-wood bonding, and may...

Epoxy Adhesives/Sealants are silicone-free.

EMCAST FIPG 1850 is curable by UV light in 325-380 nm range. Viscosity is rated at 60,000 cps, and its hardness A rating is 65. EMCAST FIPG 1851 is curable by UV light in 325-380 mn range. Viscosity is rated at 60,000 cps, and its hardness A rating is 80. Emcast FIPG 1852 acrylate based prepolymer is curable by UV light in the 325-380nm range or by heat. Viscosity ranges from 50,000-60,000 cps,...

Encapsulant/Potting Material exhibits

Ceramacast(TM) 510 aluminum oxide based, hydraulic-setting ceramic compound potting material can be used to encapsulate cartridge heaters and embed high temperature components to 3200Ã-ºF. Supplied as dry powder, Ceramacast 510 is bonded using calcium aluminate and as-cast. Its dried density is 180 lbs/ft3, and it exhibits exceptional thermal conductivity and dielectric strength of 75-100...

Epoxy Adhesive fixes electrical coils.

Tra-Bond CA20 thixotropic epoxy adhesive system is formulated for shorted turns, damaged end wire extensions, or other coil repair applications where high-fill, non-sag adhesive is needed. It provides high dielectric isolation and good mechanical strength. Readily mixed, handled, used, and cured at room temperature, Tra-Bond CA20 develops strong bonds to materials such as metals, glass, ceramics,...

Optimize Your Workforce with Weavix™ by PK Industrial

The Weavix™ platform takes productivity, quality, and visibility to a new level by providing better communication and real-time KPIs. Check out the video to learn more!