Master Bond, Inc.
Hackensack, NJ 07601
Jun 21, 2002 One-component Supreme 3HT-80 has high shear and high peel strength, and resists impact, thermal shock, vibration, and stress fatigue cracking. It adheres to metals, glass, ceramics, wood, vulcanized rubbers, and most plastics. Bonds resist water, oil, fuels and most organic solvents, even upon prolonged exposures. Operating temperature range is -100 to +350°F. It is 100% reactive and does not contain any solvents. Hardened adhesive is thermal insulator.

Permabond
Somerset, NJ 08873
Jun 21, 2002 Permabond® E04 2-part epoxy, with 1:1 mix ratio, has work life of 45 minutes and instant cure through preheat oven in most trickle varnish systems. It protects wire from breakages and wear around comutators in high-impact, high-temperature, high-speed, and high-vibration rotor applications. Epoxy is suitable for Class H motors 180°C (365°F). It is available in 50, 200, and 400 ml cartridges, plus 5 and 19 liter pails.

Epoxies Etc.
Cranston, RI 02921-3407
Jun 20, 2002 Electronic grade, casting, potting, and encapsulating epoxy resin system No. 20-3651\40 adheres to metals, ceramics, and plastics. Physical properties include mixed viscosity of 32,500 cps at 25°C, specific gravity from 1.40 to 1.45 at 25°C, and Shore D Hardness rating of 85 to 88. Tensile Strength ranges from 6,100 to 9,200 psi, and operating temp ranges from -40 to +30 and -65 to +105°C.

Tra-Con, Inc.
Bedford, MA 01730
Jun 19, 2002 TRA-BOND 293-1 high hardness, high Tg epoxy has work life of 8 hr at room temperature, high dielectric constant, and ability to make resilient bonds to variety of substrates like gold, brass and silver. Applications include optoelectronic and instrument assembly.

General Polymers
Cincinnati, OH 45242
Jun 17, 2002 Water-based FasTopâ„¢ seamless urethane cements can be installed and ready for service in hours because of their Urethane-cement chemical reaction. FasTop M, applied as mortar, can be installed in one step without topcoat. FasTop S System consists of trowled slurry blend with silica sand broadcast finish. FasTop S-U1 Upgrade System uses decorative quartz broadcast instead of silica sand and requires clear topcoat.

Tra-Con, Inc.
Bedford, MA 01730
Jun 05, 2002 Clear TRA-COAT WCC2B UV curable one-part adhesive can be used for optical fiber, glass, and general purpose applications. Adhesive is clear, medium viscosity, and cures with exposure to UV light at 100 fpm under 300 W/in. bulb. Easy to apply, it creates strong bonds to clear plastics and glass.

Tra-Con, Inc.
Bedford, MA 01730
Jun 05, 2002 TRA-BOND 2106T 2-part epoxy mixes at room temperature and creates strong bonds to metals, plastics, glass, forestry products, ceramics, rubber, masonry materials, and construction materials. It has low shrinkage, and when fully cured it acts as electrical insulator with resistance to gases, vapors, water, galvanic action, and many organic and inorganic compounds. TRA-BOND 2106T cures quickly at room temperature.

Master Bond, Inc.
Hackensack, NJ 07601
May 29, 2002 Two-component EP41S-2 epoxy adhesive/sealant and coating cures at ambient temperatures or more quickly at elevated temperatures. It is 100% reactive and contains no solvents or diluents. EP41S-2 adheres to metals, glass, ceramics, wood, vulcanized rubbers, and plastics. It withstands prolonged immersion in strong organic solvents. Operating temperature range is -60 to +275°F.

Tra-Con, Inc.
Bedford, MA 01730
May 14, 2002 Tra-Bond 2106T snap cure epoxy is recommended for use in lower temperature or wet industrial bonding applications that require fast cure. It offers low shrinkage, and excellent mechanical and electrical properties. Epoxy provides resistance to water, galvanic action, petroleum fuels, and many chemicals. It develops tough bonds to metals, plastics, glass, hardboards, ceramics, rubber, and masonry.

Master Bond, Inc.
Hackensack, NJ 07601
Apr 29, 2002 EP30-2 low viscosity, two-component system produces high strength bonds that are resistant to thermal cycling and chemicals. Resin system is 100% reactive and does not contain any solvents or other volatiles. Shrinkage upon cure is -0.0003in/in. Hardened resin provides electrical insulation. EP30-2 cures clear and is suitable for sealing, bonding, and laminating applications. Service operating temperature is -60 deg F to more than 250 deg F.

Vantico Inc.
Los Angeles, CA 90039-1011
Apr 16, 2002 Fast-curing, toughened Araldite 2010 epoxy; clear, flexible Araldite 2026 polyurethane; and 10-min cure Araldite 2027 polyurethane adhesives produce durable joints on hard-to-bond thermoplastic, metal and glass substrates and sheet molding compounds (SMC). Adhesives are packaged in 50 and 200 ml cartridges as well as in larger containers for bulk handling. Cartridges provide for precise mixing and controlled dispensing that minimizes waste.

Master Bond, Inc.
Hackensack, NJ 07601
Apr 10, 2002 Two part EP21TDC-4 for bonding, sealing, and coating applications cures at ambient or elevated temperatures. It has high peel strength, elongation of over 300%, and forms bonds that resist vibration, impact, and shock, plus fuels, water, oils, and many chemicals. No solvents or diluents are emitted during cure. It adheres to natural rubber, neoprene, nitride, and SBR rubber compounds without surface preparation. Temperature range is -100 to +250 deg F.

Electronic Materials, Inc.
Breckenridge, CO 80424 8817
Mar 26, 2002 Cationic Type V157 and V197 epoxies can be applied and irradiated with long-wave UV light in the range of 325-380 nm or with visible light in the range of 400-500 nm. Wide-range response lets adhesives be processed with many different existing light sources. Response to longer wave visible light is beneficial when bonding various engineering plastics such as Kapton and Lexan, which do not transmit UV light adequately but will transmit visible light.

Epoxies Etc.
Cranston, RI 02921-3407
Mar 18, 2002 Two-component urethane series encapsulants have durometers from 25 to 55 Shore A. Unfilled materials maintain integrity over operating temperature range of -40 deg to 125 deg C. Glass transition temperature of -72 deg C makes them suitable for low temperature potting applications. They offer electrical insulation, thermal cycling stability, chemical resistance, and no shrinkage. Mixed viscosities @ 25°C range from 4,200 to 1,600 cps.

Fiber Optic Center, Inc.
New Bedford, MA 02740 6322
Mar 13, 2002 ANAEBONd AB202 non-anaerobic adhesive is approved for field repair terminations. Suitable for bonding glass, its packaging allows for terminations in 2-3 minutes without heat. Fully cured material reduces pistoning in adverse environmental conditions. ANGSTROMBONd® AB9112 epoxy, approved to Mil A-24792A for use in OEM fiber optic terminations, will not cause cracking in multimode connectors. It withstands humidity and extreme temperature environments.

Devcon
Danvers, MA 01923
Mar 08, 2002 Nonrusting, epoxy-based Underwater Repair Putty penetrates moisture and forms strong, permanent seal. It eliminates need to dry substrates before beginning repairs, making it suitable for repairing, patching, or rebuilding wet or submerged equipment. Putty bonds securely to steel, iron, aluminum, brass, bronze, concrete, wood, and selected plastics. It cures at temperatures as low as 40 deg F and works in temperatures up to 250 deg F.

Tra-Con, Inc.
Bedford, MA 01730
Feb 27, 2002 TRA-BOND 933-1 one-part, filled chip encapsulant provides moisture resistance and electrical insulation. Coefficient of thermal expansion minimizes stress effects on components and wiring during thermal shock tests.

Tra-Con, Inc.
Bedford, MA 01730
Feb 20, 2002 Clear TRA-BOND 2113 adhesive makes strong bonds to glass, ceramics, metals and plastics, and is resistant to weather, salts, mild acids and alkalis, organics and inorganics. It can be used for bonding, laminating, sealing and small volume potting. Epoxy has good wetting and flowability, low CTE and operating temperature up to 130°C. It cures at room temperature.

Devcon
Danvers, MA 01923
Feb 20, 2002 FasMetal 10 HVAC Repair paste and Aluminum Putty F cure at room temperature, withstand service temperatures up to 250 deg F, and resist broad range of chemicals. FasMetal 10 bonds to metals, ceramics, wood, concrete, and glass. Aluminum Putty F bonds to metal or concrete and hardens to rigid material that can be ground, drilled, or tapped. Both can be used for repairing aluminum castings, repairing HVAC components, and sealing leaks in pipes and tanks.

Master Bond, Inc.
Hackensack, NJ 07601
Feb 07, 2002 Flexible, 2-component EP21TPFL-1 polysulfide elastomer resists fuels, water, and aggressive chemicals. It cures at room temperature, is 100 percent reactive, and does not emit any volatiles during curing. Operating temperature range is -65 to +300 deg F. Thermal- and shock-resistant epoxy is available in 1/2 pint, pint, quart, gallon, and 5 gal kits, and in low and high viscosity versions.