New Valves Products

Valve Island offers 7 million configurations.

Suited to semiconductor and packaging sectors, VM10 pneumatic valve island offers flow rate of .4 Cv. It is 10 mm wide and made from thermoplastic polymer, which provides resistance to chemicals. Configurations include 260 different valve options; multiple wiring options including 2-20 individually wired stations, 4-16 Multipole stations, and 4-16 Fieldbus stations; 7 Fieldbus protocols;...

Safety Relief Valve provides tight shutoff.

Built with all stainless steel internals, Figure 800 offers corrosion resistance, metal seat, and choice of 3 different soft seat options. Valve meets ASME Section VIII for liquid, steam, air, and gas services and features quick opening and short reclosing pressures. With fixed ring design, valve is available for pressures to 900 psig and temperatures to 422Ã-

Solenoid Valves are water-resistant for submerged operations.

Series 15 or 50 valves feature liquid epoxy potted coil assembly and rugged housing covered with baked-on epoxy/polyester finish rated at 1000+ hours in 5% salt spray test. All internal parts are constructed of stainless steel and brass. Corrosion resistant materials are used for exposed parts. Standard version operates on 12 Vdc, single lead power connection. Dual power lead versions can be used...

Parallel Valve System selects best valve for the job.

The S Transfer System uses combination of control valves and regulators to transfer flow to valve best suited for current steam load. Valve system consists of low flow valve, high flow valve, and pneumatic switch that selects which of two parallel circuits will be active and prevents oscillation between circuits. As flow increases and low flow valve reaches capacity, high flow valve opens while...

5 Common Liquid Injection Molding Mistakes (And How to Avoid Them)

This guide offers insights about steering clear of common LIM problems and maximizing your project's efficiency.

Pinch Valves are visible from plant floor.

Snap-action or lever-actuated pinch valves are designed so fluid only comes in contact with tubing. They are capable of pinching tubing closed up to 60 psi. Automatic self-compensating design keeps tubing pinched closed for extended periods, and indicator tells user whether valve is open or closed. Suitable for use with soft wall flexible tubing such as Tygon Lab and silicone tubing, versions are...

Lock-Out Valve complies with SEMI safety standard S2-0200.

Stackable, lock-out, tag-out valves can be configured to individually control one machine chamber. Manually operated, 3-way valves can be locked in closed position with lockout hasp and lock shackle diameter up to 5/16 in. In closed position, valves shut off airflow between inlet and outlet ports and exhaust downstream air. Max air pressure is rated to 150 psig, and temperature range is -20 to...

Valve controls temperature of steam systems.

Model TL Automatic Control Valve is available in bronze or 304 stainless steel construction, from Ã-½ to 2 in. NPT. Set points range from 35 to 240Ã-

Self-Actuating Shutoff offers 1/2 to 160 oz capacity.

Add-On Self-Actuating Shutoff accessory, designed for injection molding nozzles, is installed between nozzle body and nozzle tip, minimizing material drooling and stringing problems. Made from H13 tool steel, shutoff is totally self-contained and will not leak. Internal spring and piston shut off plastic melt as nozzle tip withdraws from mold. Shutoff is 4 1/2 in. long installed, and comes with...

Shutoff Valve closes as temperature rises.

Hi-Temp Shut-Off Valve for sampling systems responds automatically to temperature, requiring no reset or operator involvement. If temperature reaches 120Ã-

Check Valves are UL listed and FM approved.

Check Valves, in 1Ã-½ and 2 in. sizes, can be installed horizontally or vertically. They are rated up to 250 psi water working pressure and include tapped opening for system draining. Both 1Ã-½ in. and 2 in. are UL and ULC listed in threaded or grooved styles, and are FM approved in the grooved configuration as both single check valves and anti-water hammer check valves.

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.