Miscellaneous Controls

Nippon Pulse to Showcase Products at ATX West

Motion Control Specialist Highlights Stepper and Linear Shaft Motors RADFORD, VA -- For the third consecutive year, Nippon Pulse, a leader in the motion control industry, will be exhibiting its products at the ATX West tradeshow at the Anaheim Convention Center in Anaheim, CA. Dates of the events are February 9-11, 2010. Nippon Pulse will be displaying its products in booth 4171, which is located...

Read More »
High-speed MODBUS with Integrated Servo Motors MAC400 and MAC800 from JVL
Servomotors

High-speed MODBUS with Integrated Servo Motors MAC400 and MAC800 from JVL

JVL Industri Elektronik A/S, a world leader in integrated servo an stepper motors, now offers yet another feature: The latest firmware for the integrated servo motors MAC400 and MAC800 now supports the MODBUS RTU protocol. The implementation supports the Read Holding Registers and Write Multiple Registers commands, which will give R/W access to all motor registers at speeds up to 1 Mbit/s, though...

Read More »
DC Gear Motor develops 375 lb-in. torque at 103 rpm.
Gearmotors

DC Gear Motor develops 375 lb-in. torque at 103 rpm.

With dia of 4 in. (max), length of 11.5 in, and weight of approx. 12 lb, Model No. MMP-D40-675A-12V GP81-019 requires just 57 A at 12 Vdc to generate its full load torque. IP54 protected unit has continuous torque output of 1,065 in.-lb at peak. Device features keyed output shaft of 19 mm dia by 40 mm long. Motor windings for 24, 36, 48, 60 and 90 V are available. Other options available are...

Read More »
AC and DC Motors suit freight elevator gates and doors.
AC Motors

AC and DC Motors suit freight elevator gates and doors.

Manufactured using squirrel cage rotor that utilizes both aluminum and copper bars, AC Induction Motors can operate in specific and extreme conditions, including intense dryness, moisture, heat, or cold. Speed and torque can be tailored to individual requirements by shifting conductivity of rotor bars. Many models incorporate feedback sensors such as tachometers or brakes, and gear heads can be...

Read More »
Water Jacket Cooled Motor ranges from 400-3,750 hp.
AC Motors

Water Jacket Cooled Motor ranges from 400-3,750 hp.

Suited for extreme environments with space constraints, WGM Water Jacket Cooled Motor is available in frame sizes from 315-560 IEC and 5,000-8,800 NEMA with 2-8 poles and voltages from 690-6,600 V. Unit features variable frequency drive operation, vertical or horizontal mounting, and minimized thermal dissipation. Through circulation of water over frame construction and endshields, system allows...

Read More »
Brushless DC Motors produce up to 190 oz-in. of peak torque.
DC Motors

Brushless DC Motors produce up to 190 oz-in. of peak torque.

Available in 2, 2.80, 3.60, and 4.53 in. stack lengths, NEMA 23 BLDC motors suit applications requiring high speed and high dynamic torque. They offer optimal performance speed range of 300-4,000 rpm and provide quiet operation, regardless of speed range. Motors also suit applications requiring velocity control with analog input.

Read More »
Electric Motors are gas sealed for use in heating systems.
Stepper Motors

Electric Motors are gas sealed for use in heating systems.

Designed for use with all heating gases, Saia® Motor EGD 402 Gas Tight Motor and EGD 421 Fail Safe Gas Tight Motors are certified to Gas Appliances Directive 90/396/EEC to perform fail safe gas flow modulation and closing functions. They deliver 500,000 min operating cycles at 25-200 Hz in temperatures of -15 to +85°C. Available with 12 or 24 V unipolar coil, motors offer 10 or 15 mm...

Read More »
MAE® Size 34 (Model HS 200) High-Performance Hybrid Stepper Motors Exhibit Superior Torque Characteristics for Industrial Applications
Stepper Motors

MAE® Size 34 (Model HS 200) High-Performance Hybrid Stepper Motors Exhibit Superior Torque Characteristics for Industrial Applications

MAE® brand Size 34 (Model HS 200) hybrid stepper motors exhibit superior torque characteristics to power a wide range of industrial equipment applications. Their low detent torque to holding torque ratios serve to deliver smooth and quiet operation and the fine positioning capability required for microstepping. Typical applications for these steppers include actuators, packaging machinery,...

Read More »
Bosch Unveils 64 New Motors for Furniture Industry
DC Motors

Bosch Unveils 64 New Motors for Furniture Industry

BROADVIEW, IL, - Robert Bosch LLC aims to shake up the furniture industry by announcing 64 new DC electric motors for end-use furniture and cabinetry. The motors represent a significant expansion of the company's offering in the industrial marketplace, specifically in the furniture industry. The various motors can serve as actuators or direct DC drive power. Most come with gearboxes already...

Read More »
Air Motors

No Metal: Amazing Air Motors Made from Ceramic

Developed for MRI (Magnetic Resonance Imaging) Generating growth and expanding market leadership with brand new concepts It is a company's manpower which makes it more successful than its competitors, the decisive ambitious factor which results in constant development and realisation of new and innovative ideas. Highly motivated employees who provide a combination of creativity and knowledge make...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers