ISL Presents Customizable Stepper Motors That are Controlled by an Open-Loop System
Stepper Motors

ISL Presents Customizable Stepper Motors That are Controlled by an Open-Loop System

The ISL’s Stepper Motors are available in frame sizes ranging from NEMA 8 to NEMA 52 with a 1.8 degree (2-phase) step angle. The motors are customizable in parameters such as brake, gearhead, torque density, voltage, output speed, encoder/driver, power, current, step-angle and shaft configuration. These motors are suitable for use in industrial automation, retail and vending machines, robotics,...

Read More »
Applied Motion Products Exhibits New Integrated Servo Motors, Servo Drives & Stepper Drives at ATX West
Servo Motor Controllers and Drives

Applied Motion Products Exhibits New Integrated Servo Motors, Servo Drives & Stepper Drives at ATX West

Watsonville, CA…January 9, 2019…Applied Motion Products will demonstrate a selection of new integrated motors and drives for both servo and stepper motors at ATX West in booth #4264 to be held at the Anaheim Convention Center on Feb 5-7, 2019. Products on display at ATX West will include the following: MDX Integrated Servo Motors that combine high torque density, low inertia servo motors with...

Read More »
NORD Unveils New Trade Show Booth and Drive Products at IPPE
Gearmotors

NORD Unveils New Trade Show Booth and Drive Products at IPPE

NORD’s NSD TUPH™ surface conversion products provide a superior sanitary washdown solution for food producers – at a fraction of the cost of stainless steel drive systems NORD Gear Corporation provides a breakthrough aluminum surface conversion alternative to stainless steel gearmotors at a fraction of the price. NORD’s exclusive NSD TUPH™ surface conversion is available for a full line...

Read More »
PropEle Introduces EP Carry Boat Motor That Provides Ample Proportion for One to Three Hours
DC Motors

PropEle Introduces EP Carry Boat Motor That Provides Ample Proportion for One to Three Hours

The EP Carry Boat Motor is offered in three shaft lengths - mini, standard/short and long and is suitable for dinghies, tenders, small rowing and crafts under 13 ft and 600 lbs. The motor comes with 14 lbs weight and 7 lbs buoyant battery pack. The unit delivers longtime run for multiple ship-to-shore trips with speeds of 3.5 to 4.2 knots (small boats) with a range of 3-6 miles per charge. The EP...

Read More »
JVL Integrated Motors Feature Fast and Easy Setup for Rockwell Automation/Allen-Bradley PLC's
Servomotors

JVL Integrated Motors Feature Fast and Easy Setup for Rockwell Automation/Allen-Bradley PLC's

Birkerød, Denmark – After the successful introduction of the complete range of ServoStep integrated motors JVL is now releasing Add-On-Instructions for fast and easy setup and programming in Rockwell Automation’s Studio 5000 software.  All-in-one unit: Motor, Absolute multiturn encoder, Drive, Controller, PLC and Ethernet Switch as well as TÜV-approved STO option. The integrated design...

Read More »
AutomationDirect Presents MTCP2 Cast-Iron AC Motors with V-Ring Shaft Seals
AC Motors

AutomationDirect Presents MTCP2 Cast-Iron AC Motors with V-Ring Shaft Seals

The MTCP2 Cast-Iron Three-Phase AC Motors are offered in 1200, 1800 and 3600 RPM with TEFC enclosures and ribbed design. They are available in T-frame (1 to 300 HP) and TC-frame/face (1 to 30 HP). The motors come with cast iron mounting feet, steel fan cover and cast iron junction box with rubber gasket and rubber dust cover. The units features Class F winding insulation and are electrically...

Read More »
New HX56-100 Stepper Motors are Certified for Use in Hazardous Locations
Stepper Motors

New HX56-100 Stepper Motors are Certified for Use in Hazardous Locations

The Applied Motion’s HX56-100 Stepper Motors are offered in Type4X and IP66 enclosure and can be used in ATEX and IECEx certifications for Class 1, Zone 1 locations in which flammable gases, vapors or liquids exists. They are designed for use with STAC6-Q-H stepper drive that features advanced anti-resonance algorithm. This STAC6-Q-H drive is capable of running stored programs that are created...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers