New Motors Products

Stepping Motors/Drives suit motion control applications.

Available in NEMA 17, 23, and 34 sizes, SureStep Stepping Motors include bi-polar models with output torques from 61-1,291 oz-in. Units feature pigtail cable with locking connector and 200 steps/revolution. Advanced Programmable SureStep Drives offer software-selectable resolution up to 51,200 steps/revolution and power capability up to 10 A/phase. Available for drives and motors, unregulated...

Brushless Motors/Controls suit adjustable speed applications.

Available with standard NEMA face/foot mount, BSM25C and BSM33C Motors range from Ã-¼-3 hp. BMC Series controls, using standard 115/208/230 Vac, require no programming and provide tight speed regulation of better than 0.5%. Units use industry standard input command of Ã-

Piezoelectric Micro Motor snaps into OEM products.

Featuring stainless steel housing, SQL-1.8-6-12-SS SQUIGGLE Motor measures 2.7 x 2.8 x 6 mm and mounts with tabs or adhesive. Unit features 6 mm travel range, 0.5 Ã-µm resolution, speeds greater than 7 mm/sec, and stall force of 30 g. With solid bottom surface, motor is suitable for integrating into high-volume miniature products, such as optical systems, medical devices, and micro-robotic...

Microstepping Motor/Drivers offer encoder options.

CMK Series 2-phase microstepping drive and motor packages include 2.22 in.Ã-² round shaft frame size version of PK-P motor as well as standard encoder models with 1.38, 1.65, 1.97, and 2.22 in.Ã-² round shaft motor frame sizes. Encoder models are available with 200 or 400 lines and 2 or 3 channels, and motors featuring 1.8Ã-

A Guide to Trade Credit Insurance

This white paper provides a how to guide to trade credit insurance to protect your business from bad debt, optimize credit management, enhance working capital and accelerate growth.

Microstepping Motors/Drivers suit high-torque applications.

RBK series 2-phase microstepping driver and motor packages include round shaft versions of PK-P motors with 1.10, 1.38, and 1.65 in.Ã-² frame sizes as well as Planetary Geared motors with 1.65 and 2.36 in.Ã-² frame sizes. Standard encoder motors have been added to 1.38, 1.65, 2.22, and 3.35 in.Ã-² round shaft motor frame sizes, and encoders are available with 200/400 lines and 2/3...

DC Gearmotor develops 5 lb-in. torque at 1,000 rpm.

Accepting any 24 Vdc source, including battery power, Model MMP-TM55-24VGP52-04.3 measures 2.14 in. dia x 6.7 in. long, weighs 3.5 lb, and has keyed output shaft 12 mm in dia x 25 mm long. Device requires 3.6 A at 24 Vdc to generate full load torque, and motor windings for 12, 36, 48, 60 and 90 V are available. Reversible motor is rated IP54 for operation in harsh environments, and can be mounted...

High-Speed Motors range from 3.5 to 75 kW.

Available in 5 models with rated speeds from 60,000-120,000 rpm, Variable Speed Synchronous and Asynchronous Motors feature maintenance-free operation by using foil gas bearings and either permanent magnet or induction motor elements. Korolon(TM) lubricious and wear-resistant bearing coating maximizes life for both intermittent start/stop and continuous operation. Applications include pumps,...

Gear Motors perform in demanding off-road applications.

Suited for heavy-duty fan drives and powering work functions, D Series cast iron gear motors provide 4,000 psi solution in ductile 3-piece housing with electrohydraulic proportional relief valve, which maximizes machine horsepower by providing cooling only as needed. Motors also incorporate high-temperature seals and dust-resistant shaft seal. Lined with TeflonÃ-® PTFE, bronze sleeve bushings...

Closed-Loop Stepping Motors are rated for continuous duty.

Featuring stator and rotor assembly techniques that minimize power loss in motor, AR Series utilizes AlphaStep closed loop control technology, rotor position sensor, and alarm signal to maintain positioning capability. Drivers accept AC/DC voltage input and come in 1.65, 2.36, and 3.35 in.Ã-² motor frame sizes, all available with standard shaft, 3 types of gearheads with various gear ratios,...

DC Gearmotor develops 310 lb-in. torque at 13 rpm.

Accepting any 36 Vdc power source, including battery power, Model MMP-TM55-36VGP52-308 measures 2.14 in. dia x 7.75 in. long and has keyed output shaft of 12 mm dia x 25 mm long. Output of this reversible gearmotor is rated for 308 lb-in. continuous torque at 13 rpm and 443 lb-in. peak. Requiring 2.1 A @ 36 Vdc to generate full load torque, 4 lb gearmotor helps extend battery life and produces...

SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents

Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.