New Motors Products

New Stepper Motor Requires Very Little Installation Space

Achieves balanced combination of speed and torque with low weight and volume. Designed especially for applications that require large opening. Offers very large hollow shaft with inner diameter of 40 mm. and 24 mm. of thickness.

New MAC1500 AC Servo Motor Comes with Built-In Controller

Offers Nano-PLC, direct AC mains supply and can withstand the rigorous demands required. Available with length of 182 mm. with torque of 4.78/14.3 Nm at 3000rpm. Requires connection of the main voltage of 3x400VAC through the M23 connectors.

New AL8000 Linear Motors Available in 50, 80 and 130 mm Widths Option

Ensures consistent force and temperature distribution within the motor without critical hot spots. Offers linear motor types in terms of overall length, type of winding and cooling type. Peak forces of 120 to 6,750 N are possible as well as maximum speeds of up to 12 m/s.

Continental Offers New Wiper Motors and Transmissions for Direct OE Replacement

• All new components, no reman, core deposits, or consolidation short cuts Allentown, PA October 13, 2020 – Continental has introduced a new line of original equipment windshield wiper systems replacement parts that are available directly to the aftermarket. Formerly dealer-only parts, the Continental program offers 20 part numbers of wiper motors and transmissions providing applications on...

Speciality Heat Exchangers 101: Considerations for Choosing the Right One for Your Application

Specialty heat exchangers play an important role in a wide variety of industrial applications, and it's crucial to select the correct device for your application. Check out this guide and learn how to choose the right heat exchanger.

Latest Three-Phase Vari-Green Motors Operate at IE5 Efficiency Levels

Accept 208-230V and 460V power supply and are available in sizes ranging from 1 to 10 hp. Compatible with all Vari-Green controls and other controls such as building automation system and has an auxiliary contact for motor status or damper actuation. Speed can be controlled via onboard dial or 0-10 VDC control signal.

New Brushless High Torque Motor with Peak Torque of 0.5 Nm at 48 VDC, 4 Amp

HT35 is brushless which means there is no internal friction, pollution or sparking from brushes and no inherent voltage brush drop. Available with maximum efficiency of 85%, resistance of 13.4 Ohms and inductance of 1.7 mH. Specification includes rated torque of 121 mNm at 0.9 A and rated speed at 2035 RPM.

New MDD Miniature AC Servomotors are RoHS and CE Compliant

Available in frame sizes as small as 13mm and as large as 70mm, and feature ripple-reducing design and are clean-room ready. Able to bear large loads through robust bearing arrangement, and can deliver increased torque due to its high-energy magnets and power-dense winding technology. Come with built-in high-performance encoder (either absolute or incremental) that enables direct fine positioning.

New Ghost Freshwater Trolling Motors Include Instant and Smooth Fly-by-wire Steering Control

Ghost 52 and 60 offers two integrated sonar nosecone options, including HDI and optional Active Imaging™ 3-in-1 transducers. Brushless motor helps eliminate noisy operation and unlike common brush motors, has no brushes to wear out, ensuring greater reliability and long life. Pairs simply with HDS® LIVE, HDS® Carbon and Elite™ Ti2 displays via a simple NMEA 2000® connection.

New Linear Motors Feature Open Aperture of 0.50 in.

HVCM-051-025-013-01 has a hollow core that allows for optics, illumination, laser beams or cables to pass through. Comes with continuous force rating of 5.3 lbs and a peak force of 16.9 lbs at a 10% duty cycle. Ideal for medical diagnostics and testing, laser beam steering, wafer handling, laser cutting and welding, dynamic vibration absorption, optical focusing, scanning and positioning...

New PMDC Gearmotors with Rated Torque Ranging from 20 lb-in to 1535 lb-in

33A7-25H2 and 33A7-30H3 delivers up to 1535 lb-in torque while using 40-60% less energy than a same-size worm gearmotor. Large 30H3 gearhead features a 1.25 hollow shaft and covers the gear ratios of 80:1 to 240:1. Ideal for conveyors, pumps, packaging, industrial automation and wide range of solar- or battery-powered equipment.

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.