New Motors Products

MDX Integrated Servo Motors from Applied Motion Products are Now UL Recognized

Watsonville, CA… July 10, 2020… Applied Motion Products increases the acceptance of MDX Integrated Servo Motors into industrial motion control applications with UL Recognition on all models. This certification assures users in the United States and Canada that these motors meet high quality standards for electrical safety. The integrated motors were evaluated according to ANSI/UL standards...

New Electric Motor for Low and High-voltage Applications Ranging from 24 to 800 V

Offers continuous power from 20 kW to 60 kW and peak power from 30 kW to 70 kW. Spicer® 141 axle is available with wet brake and drum brake configurations. Lifetime wet brake offering comes standard with an internal spring-applied hydraulic-release parking brake to support industry safety initiatives.

New Linear Stepper Motors Provides Low Profile and Small Cross Section

Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of very precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Ideal for high-speed open loop positioning applications.

New Miniature Linear Voice Coil Motor Comes with Threaded 2-56 UNC-2A Shaft

Features high acceleration/deceleration, high speed, high reliability, zero backlash and 0.125 in. (3.2 mm.) stroke length. Offers high force to size ratio with 5.0 oz (1.4) continuous force and 15.7 oz (4.4 N) of peak force with housing measuring 0.625 in. (15.9 mm.) dia. by 0.375 in. (9.5 mm.) long. Ideal for heptic feedback and pipetting in medical devices, switch activation, testing, sorting,...

Third Party Logistics and Fulfillment

This whitepaper provides an overview of third party logistics (3PL) and fulfillment services.

New Linear Stepper Motor with 30/60 mm Effective Stroke

PFL20 is a efficient, high thrust tin-can linear actuator with a bipolar winding. Reaches 5V rated voltage, resistance of 33 Ohms/phase and inductance of 12 mH/phase. Simple structure of linearstep motor helps to save space and reduce costs, due to few components needed.

New Linear Stepper Motors for High-speed Open Loop Positioning Applications

Performs at speeds of up to 80 in/sec and strokes of up to 68 in. Capable of precise position, velocity and acceleration control when coupled with a micro-stepping drive and indexer. Provides multiple forcers on a single platen and no servo tuning is required.

New AXW Large AC Motors for Harsh and Contaminate Filled Environments

AXW 5000 and 5800 motors are available with IP56 rating for protection against contaminants and dust ingress. Suitable for continuous operations due to consistent cooling of water jacket surrounding the motor. Advantages include high power densities, small overall footprint size as well as reduction of noise and heat in surrounding environment.

New NEMA AC Motors for Hazardous Area Locations

NXR 7100 is class I div 2 capable and offers more HP per pound than conventional TEFC motors but with small frame size in some power ratings. Available with up to an IP56 rating for protection against contaminates and dust ingress. Internal cooling loop circulates air inside the motor, moving heat from the rotor to the frame, where an external fan blows air over the frame to remove the heat.

New Linear Voice Coil Motors Offer Low Inertia and Zero Cogging

Available in very LVCM-025-038-01 and LVCM-025-038-02 models with high accuracy and repeatability when operated as DC servo motor in a closed servo loop. LVCM-025-038-01 features continuous force of 2.5 lbs (11.0 N) and peak force of 7.8 lbs (34.7 N) whereas LVCM-025-038-02 features 16.4 oz (4.6 N) and 51.9 oz (14.4 N) respectively. Come with 10-32 UNC-2B threaded mounting hole in the housing and...

New Energy-Efficient Motor is IP66 Rated

Available in 20 models and provides power range of 0.16 to 60 HP. Comes in 4-pole configuration and suits IEC frame sizes from 63 to 225. Includes quick connectors, single or double protection canopies, space heater, spring applied brake, and forced ventilation.

Don't Let Your Money Drain Down the Hole...Drill Steel with Euroboor

As a globally recognized manufacturer of industrial grade portable tools, Euroboor is at the forefront of drilling and cutting technology. Our reputation as an industry leader is built on robust products that fit a wide range of industrial cutting and drilling applications. See our video to learn more about all of our quality products.