Reversible DC Gearmotor develops 46 lb-in. torque at 50 rpm.

Reversible DC Gearmotor develops 46 lb-in. torque at 50 rpm.

Accepting any 24-28 Vdc source, including battery power, Model MMP-TM55-36-28V with integral brake measures 2.2 in. dia x 7.2 in. long and has keyed output shaft of 0.500 in. dia x 1.5 in. long. Mounting is accomplished with 4 face mount M5 threaded holes, equally spaced on 40 mm dia B.C. Requiring 2.1 A at 28 Vdc to generate full load torque, gearmotor features True Planetary Gearing with Delrin...

Read More »

ABB Wins Automation Seamless Pipe Mill Order in Brazil

Automation based on System 800xA will make new plant more productive, energy efficient Houston, Texas, November 24, 2008 - ABB, the leading power and automation technology group, recently won a contract to supply automation systems, equipment and services for a new seamless steel tube and pipe production plant for VSB (Vallourec & Sumitomo Tubos do Brasil). The new plant will have an annual...

Read More »

iQ Motor for Appliances

Energy-savings potential for small axial fans: Identically sized EC drive replaces shaded-pole motor In countless fans, shaded-pole motors are the current state of technology, particularly if low power is required. Because these motors can be operated directly on the AC voltage mains, they are frequently preferred for household appliances. One typical application area is fans for convection...

Read More »

ABB Wins $62 Million Order in Oman

Electrical and automation systems to maximize efficiency at iron ore processing plant Zurich, Switzerland, Feb. 23, 2009 - ABB, the leading power and automation technology group, has won an order worth approximately $62 million from Vale to supply electrification and automation systems and related equipment for a new iron ore pellet plant in Oman. The new Vale plant, 230 kilometers northwest of...

Read More »

Three-Phase Synchronous Motors come in 6 different sizes.

With optimized torque ripple and stall torque between 0.8-2.5 Nm, 8JS three-phase synchronous motors have sinusoidal commutation with EnDat encoder or resolver as feedback unit. They directly divert lost power generated in stator to flange via housing, allowing regeneration of energy.

Read More »
DC Gearmotor provides 196 lb-in. torque at 7 rpm.

DC Gearmotor provides 196 lb-in. torque at 7 rpm.

Model MMP-TM55-60-24V GP52-195 is reversible gearmotor capable of 443 lb-in. peak torque, requiring 1.3 A at 24 V for full load and also accepting battery power. Device is mounted with 4 equal spaced, face-mount M5 threaded holes. Featuring IP54 rating, it weighs 4 lb with 2.14 in. dia and 7.75 in. length and includes 12 mm dia, 25 mm long keyed output shaft. Motor windings for 12, 36, 48, 60,...

Read More »
Oil Well Pump Motors are available from 3-100 hp power.

Oil Well Pump Motors are available from 3-100 hp power.

Featuring motor running at speed of 1,200 rpm, Elektrimax Design D oil well pump motors are suited for beam pumping units, punch presses, and applications demanding high slip and torque motor solutions. IP55 protected, dust and water resistant units have oversized regreasable bearings on both drive end and opposite drive end. Epoxy coated motors are rust and corrosion resistant, and are VPI...

Read More »
Integrated AC Servo Motor offers Bluetooth connectivity.

Integrated AC Servo Motor offers Bluetooth connectivity.

Featuring modular design can be adapted to various applications, MAC integrated servo motor can incorporate Module MAC00-FB4 for completely cable-free and wireless control. Motor can be set-up and controlled over BlueTooth link via mobile phone or PC through module, which can be programmed via MacTalk software. Module also offers possibility for connection of local zero-set sensor and provides...

Read More »

Brushless DC Ring Motor suits direct drive applications.

Achieving up to 80% efficiency, TG8260 supplies 2,075 oz-in. peak torque and 1,534 W continuous power from 2.03 in. length by 8.386 in. dia package that weighs only 45 oz. It provides quiet operation and conserves energy with gyroscopic effect that reduces vibration. In vehicle propulsion systems, unit may be mounted inside wheel hub for reducing space requirements and weight. Applications...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics