New Motors Products

DC Motor is suited for light duty belt conveyors.

Micro-Motor 24V brushless DC geared motor has right angle design that fits into 2 3/4 in. conveyor frame. Gearbox transfers 99% of motor output power to belt drive pulley. Driver card controls and activates motor allowing varying conveyor speed and change of travel direction. Micro-Motor has torque rating up to 112 in. lbs and can drive 1.9, 2.25 or 2.5 in. belt drive pulleys. Drive system moves...

22mm DC Motor promotes heat dissipation.

LO-COG 22mm brush-commutated DC motor is 1.900 in. in length and employs 5-slot armature design and bonded neodymium iron boron magnets. It is suitable for mass data storage and semiconductor processing equipment. Standard cartridge assemblies prolong brush life by maintaining optimum brush force.

Stepping Motor Drive IC operates in -20 to +75-

Model FAN8200 2-channel drive IC is manufactured using bipolar process. Integrated dual H-bridge drivers with vertical PNP power transistors result in low saturation voltage (0.4V @ 0.4A) and optimum thermal characteristics (Vcc = 2.5V ~ 7.0V). Unit features built-in shoot-through current protection and thermal shutdown (TSD) function. FAN8200 accommodates 3.3 or 5V MPU control input, and...

Motor-Driver Packages are available with size 34 motor.

CSK Series features size 34, 2-phase, hybrid stepping motor and compact board level driver. Holding torque values vary from 305 oz-in. for CSK296-ATA to 916 oz-in. for CSK2913-ATA stepping motors. Driver packages produce drive currents of 4.0 and 4.5 A per phase. They include automatic current cutback function. Step angle select switch allows user to select full step (1.8Ã-

Knobs, Handles & Grips

Read About Our Range Of Knobs, Handles, and Grips

AC motors can replace PMDC motors.

MicroMAX(TM) line of low horsepower ac inverter duty motors are direct replacement for permanent magnet dc (PMDC) systems. Available in l/4 to 3 hp, C face motors have same mounting configuration as PMDC counterparts, including foot print, flange dimensions, shaft length, and diameter. They can be equipped with PWM scalar drive.

Servo Motors are IP-65 washdown capable.

Washdown capable servo-motors utilize IP-65 compatible components in wiring connector and all joints, as well as stainless steel sealed bearings and shafts. Replaceable brushes are protected using 0-rings in brush cap. Features include stainless steel ABEC-3 (or better) bearings, precision machined 6061 aluminum endcaps, plated solid steel housings, micro-balanced skewed armatures, and 24-hour...

Brushless DC Motor has integrated electronic controller.

Totally enclosed in all-aluminum case, TAM58-2E Industrial Series motors conform to IP44 construction and NEMA Size 23 mounting standards. Motors work well in damp, dusty and harsh environments, and have maintenance-free ball bearings. They are suitable for use in applications such as automated conveyor systems, bar code labeling, printing, pumps, valves and machine tools. Rated torque ranges...

Slotless Motors are suitable for hand tools and robotics.

Slotless, brushless, DC motors feature slotless stator winding and rotor construction, which provide zero cogging torque and vibration. Stator winding of high density copper positioned inside toothless stator ring creates no preferred rotor position and reduces audible noise. Nominal frame sizes range from 1.4 to 5.8 in. dia, achieving speeds up to 50,000 rpm with torque constants to over 600...

AC Motor is for use in general-purpose applications.

RelianceÃ-® CALIBRE(TM) general-purpose AC Motor is available in horsepower ratings ranging from 3 to 50. Available in horizontal foot-mounted configuration, with optional C Face designs, product is EPAct compliant, and comes with TEFC enclosure in 3600, 1800, or 1200 RPM speeds. It is offered with voltage ratings at 3 Phase, 60 Hertz, or 50-Hertz power systems.

Servo Motors feature internal Hall sensor feedback.

ELCOM ST(TM) slotted brushless DC servo motors, with 6-slot lamination design, are available in stack lengths of 1/2, 1, 1 1/2, and 2 in. All have 4-pole rotor featuring neodymium iron-bore magnets. Continuous torque output up to 49 oz-in. can be achieved with motor speeds up to 8,000 RPM and power output up to 188 watts. Mounting configuration is consistent with NEMA 23 standards.

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.