New Motors Products

DC Motors have skewed armatures to reduce cogging.

LO-COG Series 8690(TM) 26mm brush-commutated motors are available in lengths of 1.798, 1.923, and 2.173 in., and provide continuous torque output up to 3.17 oz-in, peak torque up to 20 oz-in, and speeds up to 9,000 rpm. They have two-pole permanent magnet stators and diamond-turned commutators for maximum brush life. Options include optical encoders, custom cables, shaft modifications,...

Drum Motor meets MHSA requirements.

Explosion proof 30 hp motor provides safe operation when driving belt conveyors in applications that have potential for fire or explosion, such as mining, feed and grain, sugar mills, and fertilizer plants. Low-profile, 12.5 in. dia motor has heavy-duty bolts; secondary o-ring seal for complete hermetic sealing; standard face width of 51 in.; and cast iron shell, shaft, and end cap. Drum speed is...

Cooling Tower Motors handle hostile environments.

Epact and NEMA Premium(TM) cooling tower duty replacement motors operate in extreme humidity conditions and corrosive environments. Motors have double-sealed bearings, potted leads, bearing caps on 280 Frame and above, heavy gasketed conduit box and cover, sealed lead openings, sealed bracket-to-frame registers, and umbrella-type seal for shaft-up mounting. Motors are available in 2 to 100 hp....

Gearmotors have sealed design to keep oil clean.

Improved right angle single reduction gearmotors are available from 1/2 to 25 hp, in ac and dc. They have internal expansion bladder and Mobil synthetic SHC 634 oil bath lubrication. Because gearmotors are not vented, outside contamination from environment cannot enter and oil stays clean. Other improvements include induction hardened and ground worms for increased life, and castings that...

Wear - What Wears in Electromagnetic Brakes

Learn the common causes of wear for "fail-safe" brakes and how to prevent wear for safe use.

DC Motor meets global OEM needs.

Reliance C500/GS315 provides flexibility to meet either NEMA or IEC dimensional requirements. Four-pole configuration in square, laminated frame improves commutation and heat dissipation. Cast-iron end brackets, with integral mounting feet, put load-carrying members in same vertical plane to eliminate vibration. Motor is available through 800 hp and suits metal, paper, petrochemical, converting,...

Linear Motors have environmentally protected design.

LC brushless linear motors utilize laminated steel core design optimized for Finite Element Analysis. Model LC-80-240 is 80 mm wide x 240 mm long and rated at 62 lbf continuous. Model LC-80-340 is 80 mm wide x 340 mm long and rated at 94 lbf continuous. Stainless steel shroud covers magnets providing protection. Magnet track sections are easily butted together to achieve any required travel....

Planetary Gearmotors suit OEM applications.

Compact, 16 mm Planetary Gearmotors are offered with range of motor windings, gear box housings, gears, and gear ratios. DC motor has speed range of 7 to 3,000 rpm and can be specified for any voltage from 1 to 36 V. Lightweight, 1-, 2-, 3-, and 4-stage gearmotors have torque range of 1 to 30 oz-in., standard ratios from 3.6:1 to 450:1, are 90% efficient, and weigh 1.5 oz. Standard housing and...

DC Motor fits hand-held tools.

Compact, brushless device measures 1.75 by 4 in. and produces torque up to 190 oz-in., making it suitable for use in assembly tools, machine-tool spindles, and centrifuges. With 90% efficiency rating, motor remains cool during operation and operates in temperatures up to 155 deg C. Options include windings for specific power requirements and custom mounting configurations.

PM Motor is rated for 160 deg C temperature rise.

ThinGap(TM) TG3600 Series slotless brushless PM motor incorporates winding technology that eliminates eddy current and hysteresis losses. Maximum continuous torque of 115 oz-in. is achieved at 2400 rpm rated speed using input voltage of 24 Vdc and 15.6 A from PWM servo amplifier. Armature inductance measures below 10 microhenries and line-to-line resistance is 0.31 ohms @ 25 deg C. Motor measures...

Stepping Motors have high torque density.

PK Series miniature 2-phase hybrid devices are available in 2 frame sizes: 1.1 and 1.38 in. sq. Smaller model is available in lengths of 1.26, 1.57, and 2.03 in. that produce holding torques of 9.2, 13.7, and 16.6 oz-in. respectively, in bipolar excitation mode. It reaches shaft speeds of 4,000 rpm. Larger model is available in lengths of 1.46 and 2.05 in. with holding torques of 28 and 54...

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.