Drum Motor meets demands of corrosive applications.

Drum Motor meets demands of corrosive applications.

Suitable for medium- and heavy-duty applications, conveyor motor features rugged construction for bulk handling applications. Hermetically sealed, it is protected from water, dirt, dust, grit, and chemicals. Motor features internal AGMA 12 rated high alloy steel gears with inverter that runs at 96% efficiency. Available in diameters from 3.9-19.69 in., and face widths from 10-63 in., drive motors...

Read More »
Motors suit light assembly and inspection applications.

Motors suit light assembly and inspection applications.

HO Series brushless servo motors combine NEMA 23 mounting with through hole and encoder. Combining accuracy, resolution, and repeatability of rotary stage, motors come with internally mounted glass encoder grating aligned to better than 24 microradians of absolute accuracy. Resolutions greater than 29,000,000 counts/revolution can be achieved with repeatability of 0.3 microradians. Torque curves...

Read More »
Standard Motors are upgraded to Inverter/Vector duty designs.

Standard Motors are upgraded to Inverter/Vector duty designs.

Inverter/Vector Duty Motors conform to NEMA MG-1-1998 Section 31.4.4.2, and include Class H magnetic wire insulation and IP55 enclosure protection. At speed range of 5:1, they offer constant torque from 60 to 12 Hz. At speed range of 20:1, constant torque ranges from 80 to 4 Hz. Totally Enclosed Fan Cooled motors are UL recognized, CSA approved, and European Union CE Certified. They are designed...

Read More »
Servo Motor has integrated ball screw.

Servo Motor has integrated ball screw.

Brushless DC servomotor-based actuator, with precision ball screw and low-profile encoder, provides linear speeds up to 5,000 rpm and closed-loop control. Compatible with all 3-phase brushless DC motor amplifiers, NEMA size 23 motor offers permanently lubricated ball bearings and dynamically balanced rotor. Compact, 2.0 in. motor length provides up to 80 oz-in. peak torque. Applications include...

Read More »

Gearmotors suit small- to medium-duty operations.

Utilizing Conex(TM) helicoidal gearing, Series B gearmotors and reducers deliver power capabilities up to 20 hp and maximum output torque capacity of 5,000 lb-in., with 10 ratios from 5/1 to 60/1. Factory sealed units are offered in single universal gear case sizes 02 to 11, with hollow bores for maximum flexibility. Products are suitable for use on conveyor handling systems in paper and...

Read More »
Stepper Motors provide 5-phase motion control.

Stepper Motors provide 5-phase motion control.

Series PCE High Torque Motors are CE-rated and come in 3 lengths from 33 to 98 mm and standard 17, 23 and 34 NEMA sizes. Units offer dielectric strength of 3,000 V and produce nearly 900 oz-in. holding torque. They feature cast iron exterior and are sealed for protection against dust and moisture. High-resolution performance includes 500 Full Steps per Revolution (.72Â-

Read More »
AC Gearmotors operate at noise thresholds of 29 dB.

AC Gearmotors operate at noise thresholds of 29 dB.

V Series AC gearmotors incorporate strengthened shafts that mate to long life (10,000 hours) GV gearheads. Noise-reduction techniques include accurate assembly to micron level. Motors provide output power levels of 6 to 60 W, depending on motor frame size, and include induction, reversible, and electromagnetic brake motors. They can be supplied as 1-phase 110/115 Vac or 220/230 Vac as well as...

Read More »
Linear Motors suit medical and scanning applications.

Linear Motors suit medical and scanning applications.

Miniaturized ThrustTube Micro motor modules can be combined to create miniature x - y platforms. Motor block weighs 76 g and is constructed from polymer and epoxy to achieve accelerations of 30 G while retaining sub-micron positional accuracy. Use of polymers eliminates eddy currents in device, making motors able to achieve speeds of 10 m/sec. Modules are 60 mm wide x 48 mm high and up to 600 mm...

Read More »
Air Motor features triggerless operation.

Air Motor features triggerless operation.

Model 952 features dual-purpose air line: same line that brings compressed air to motor carries exhaust air away. When motor is pushed forward, it automatically shifts into Forward rotation. When operator pulls back, it shifts into Reverse. Motor produces 5 lb-ft of torque for expanding or cutting Â-¼ to 3/8 in. OD tubes, with maximum speed of 800 rpm. It includes Â-¼ in. Square Quick...

Read More »
AC Servo Drive/Motor suits small machine tool applications.

AC Servo Drive/Motor suits small machine tool applications.

ECODRIVE Cs series system-compatible AC servo drive is offered in 100-750 W power range with 230 Vac, 1- or 3-phase power input. Unit measures 2.17 x 7.17 x 6.69 in. (W x H x D). Motor includes options for built-in holding brake, keyed output shaft, and absolute feedback. Available with various open bus interfaces, ECODRIVE Cs incorporates firmware that embodies process-oriented technologies...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics